gblanchette

Grimtoc

These are interchangeable ears for <a target="_blank" href="https://cults3d.com/en/users/nx3creationsllc" rel="nofollow noopener">NX3CREATIONSLLC</a> 5 magnet Disney headbands. I used the blank ear file in their pack and added different painted designs for our families upcoming trip to Disney. Hope someone else can use as well :)&nbsp;You will need 10x 3mm x 6mm Magnets for the pair.&nbsp;Looks better with a .2 nozzle, but I'm not going for perfection :)

Elsa (Frozen) Disney Ears for 5 magnet modular headband

Disney

Mekelele

Bee Careful is a modular desk organization equipment. It includes dozens of combinations, and it will expand even further with upcoming modules.I rushed a bit to meet the project deadline. I hope there won't be any errors in the project. If there are, I apologize in advance.This project has not been completed in its entirety. I will make additions in the future. &nbsp;&nbsp;The concept color is inspired by black and yellow, taking cues from bee colors. However, you are free to choose any color variation you prefer. I tried to check it by printing in a single color since I don't have Bambu Lab 3D printer with AMS.&nbsp;English is not my native language, so I am getting translation support. I hope I did not write it incorrectly.&nbsp;<h4>Update 2 (28.02.2024): </h4><ul><li>added 2 more size for Item Holder Design-2</li></ul><h4>Update 1 (23.02.2024): </h4><ul><li>added new item holder:  Item (Key) Holder Design-4</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h2>- Bee Careful Item Holder -</h2><h2><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-02_1a34ac238a4bc.png"> - Business Card Holder with Writing Plate -</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-03_e962c94d9450e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-03_9a12107db8492.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-03_897585f40acab.png"></figure><h2>- Item Holders -</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-23_b1df436401fd2.png"></figure>&nbsp;<ul><li>Hexagonal Embossed Item Holder - Heights: 23mm,30mm,40mm,50mm</li><li>Classic Item Holder - Heights: 23mm,30mm,40mm,50mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-20_0e99876322046.png"></figure><h2>- Paper Holders -</h2><ul><li>Hexagonal Perforated Walled Paper Holder - Heights: 23mm,30mm,40mm,50mm</li><li>Hexagonal Perforated (All Sides) Paper Holder - Heights: 23mm,30mm,40mm,50mm</li><li>Hexagonal Embossed Paper Holder - Heights: 23mm,30mm,40mm,50mm</li><li>Standart Paper Holder - Heights: 23mm,30mm,40mm,50mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-20_f929f1866ffd2.png"></figure><h2><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-02_31a838953f519.png"> - Pen Holders -</h2><ul><li>Single-sized</li><li>Double-sized <img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-02_7226c15d7ec63.png"></li></ul><h2>- TIC-TAC-TOE Game -</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-20_7f6ff209504dd.png"></figure>&nbsp;<h2>- USB Sticks Holders -</h2><ul><li>USB Sticks Holder Design-1: 9 USB sticks + 1 full-sized SD card + 1 micro SD card</li><li>USB Sticks Holder Design-2: 8 USB sticks + 2 full-sized SD card + 2 micro SD card</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-02_62b80361cd992.png"></figure><h2>- Drink Coaster and Holder -</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/572508/2024-02-02_7bbcc500a1d9a.png"></figure><h2> </h2>&nbsp;

Bee Careful - Modular Desk Organizer

organization 

Rincewind76

This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend.The performance of the hotend of the Bambu Lab X1C/X1 is comparable to the Rapido hotend, but the price is only a fraction of the Rapido. &nbsp;So Sam Schmidt from the Voron/Bambu Facebook group designed an adapter for the Bambu hotend to be used in a V6 like manner in Stealthburner. MrTeliP improved the design and I adapted it to be more reuseable.&nbsp;The heat insert should be M3, 5mm diameter, length 3,5-4mmThe screws have to be M3x14, see pictures.

Voron Stealthburner Printhead for Bambu X1C/X1 Hotend

Voron

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-15_92eaaa9691a14.gif"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you&#39;re interested in seeing more designs like this please consider boosting to support development of future projects. Thank you!</boostcontent></boostme><h2>Modifications and Add-on Designs</h2><ul><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li><li>Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li></ul><h2>Specifications</h2><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h2>Printing Tips</h2><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h2>Printed Parts</h2><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h2>Launcher Assembly</h2><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don&#39;t remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h2>Toroidal Ring Assembly</h2><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h2>Changes</h2><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM Planetary Gearbox

STEm

tgsparky77

I designed these last year for other things but thought I'd make some caps so I can identify which WAGOs are in them with dots representing the 2,3 and 5 WAGOs. They are 50mm, 100mm and 150mm tall with the caps on and the containers are 40mm in diameter&nbsp;I also added in the files a plain cap and caps with just WAGO on them. I have also got 3 types of wall mount holders (see my page or the link below)&nbsp;I've made profiles for PLA or PETG. I wouldn't print anything bigger than 0.2 on the threads. Also it would be best to print in at least PETG incase you drop them. The ones I designed over a year ago in PETG are still great after being dropped at work a ton of times.&nbsp;Check out my other case WAGO accessories&nbsp;<figure class="image image_resized" style="width:56.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/187496/2023-11-15_5501ed20141e7.jpg"></figure><a target="_blank" href="https://makerworld.com/en/models/64771#profileId-67997" rel="nofollow noopener">https://makerworld.com/en/models/64771#profileId-67997</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/187496/2023-11-11_9184be9f26c81.jpg"><a target="_blank" href="https://makerworld.com/en/models/44836#profileId-52896" rel="nofollow noopener">https://makerworld.com/en/models/44836#profileId-52896</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/187496/2023-11-11_6633a4349011.jpg"><a target="_blank" href="https://makerworld.com/en/models/44836#profileId-52896" rel="nofollow noopener">https://makerworld.com/en/models/44836#profileId-52896</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/187496/2023-11-11_0afa9ac61d2d2.jpg"><a target="_blank" href="https://makerworld.com/en/models/59144#profileId-61186" rel="nofollow noopener">https://makerworld.com/en/models/59144#profileId-61186</a>&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/187496/2023-11-11_a19966d382614.jpg"><a target="_blank" href="https://makerworld.com/en/models/51634#profileId-53359" rel="nofollow noopener">https://makerworld.com/en/models/51634#profileId-53359</a>&nbsp;&nbsp;&nbsp;Enjoy

Universal - WAGO Screw Capped Containers

organization

Kubikossi

<h2>New Universal Spool v2 released! <a target="_blank" href="https://makerworld.com/de/models/125311#profileId-135347" rel="nofollow noopener">Click here</a>!</h2>&nbsp;Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience.<a target="_blank" href="https://youtu.be/YNShKH9P1Qs?si=-JpmYJoZzH9Go-eM" rel="nofollow noopener">Check out my new video with a steb by step tutorial.</a><ol><li>Measure the width of the cardboard spool (inside between the reels). </li><li>Carefully remove one side of the cardboard spool. </li><li>Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core.</li><li>Then turn over and remove 2nd side of cardboard reel.</li><li>If desired, then insert Silicatube (with silica gel or ballast).</li><li>Then screw on second roll, done.</li></ol>Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want)&nbsp;22.11.2023&nbsp;added the new v2 Cores (as Print Profile)<figure class="image image_resized image-style-side" style="width:37.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_2f2f7f0bccecd.jpg"></figure> The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly.&nbsp;The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools:<ul><li>Creality</li><li>eSun</li><li>GratKit</li><li>Kexcelled</li><li>Overture</li><li>Sunlu</li></ul><figure class="image image_resized image-style-side" style="width:37.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_61966bfd41a5d.jpg"></figure>&nbsp;Not yet tested, but should fit:<ul><li>Eryone</li><li>Bambu Lab Refill</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;17.10.2023 <ol><li><a target="_blank" href="https://makerworld.com/en/models/43852#profileId-45166" rel="nofollow noopener">new rewind core</a>. With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool.</li></ol>&nbsp;02.10.2023<ol><li>added a &#34;Core Jayo 85-55&#34; especially for Jayo Spools. It&#39;s slightly smaller than the normal 100-55 Core.</li><li>reworked the silica-top, the thread now runs more easily.</li><li>updated the 3mf-File</li></ol>

Universal Spool for Bambu AMS

9arr3tt

Print Profile for P1P 5x5 is the largest size that fits on Bambu build plates

Disney

organization

Voron

STEm

organization

AMS

Gridfinity