gamersnowman

Gunner Lee

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Bolt Action Pen

Tools

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Misc

iLab 3D

A tiny and simple filament clip. Easy to print, easy to use.&nbsp;FLAT VERSION: <a target="_blank" href="https://makerworld.com/it/models/133286#profileId-144555" rel="nofollow noopener">CLIPPY - filament clip - flat version by iLab 3D - MakerWorld</a>&nbsp;Plese, consider my other models:<a target="_blank" href="https://makerworld.com/it/u/15446660" rel="nofollow noopener">iLab 3D | Published - MakerWorld</a>

CLIPPY - Filament clip

PrintTools

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

EmBy Designs

First in the series.Not suitable for users who consistently remove the SD Card as there is no access hole.&nbsp;2 versions; AMS and non-AMS. AMS - Push the Joy Cons onto the frame. Non-AMS - All parts are push-fit and do not require glue but there is no harm in using a few drops for peace of mind.

X1 Carbon Screen Decoration Nintendo Switch

PrinterUpgrades

mateibocancios

****UPDATE**** - I noticed many people were confused by why the pieces don't fit into each other, (even though that was not the original design's intention) I uploaded another profile where the plateau sits neatly inside the lightbox. ON THE PROFILE SECTION click “click to see more” and it's the last one uploaded. Thanks to everyone for printing and I am sorry the instructions and design wasn't clear enough. ****Thanks for reading****&nbsp;The Giza Plateau (Arabic: هضبة الجيزة) is a limestone plateau in Giza, Egypt, the site of the Fourth Dynasty Giza pyramid complex, which includes the pyramids of Khufu, Khafre and Menkaure, the Great Sphinx, several cemeteries, a workers' village and an industrial complex. It forms the northernmost part of the 16,000 ha Pyramid Fields in the Western Desert edge of the Nile Valley that are part of the UNESCO World Heritage Site, Memphis and its Necropolis  <ul><li>"Giza Illuminated" is a captivating 3D model crafted for the LandMark Inspired Design Contest. This transformative piece takes an aerial view of the Giza Plateau and infuses it with a topological style, elevating it to a modern masterpiece.</li><li>The three iconic pyramids—Great Pyramid of Giza, Pyramid of Khafre, and Pyramid of Menkaure are meticulously rendered, showcasing the plateau's natural contours.</li><li>What sets this model apart is its dual purpose: a precise topographical representation and a functional lightbox.</li><li>Embedded LED lights within the plateau create a mesmerizing interplay of light and shadow, casting an enchanting glow that brings the ancient wonders to life. "Giza Illuminated" serves as a symbolic fusion of history and innovation, honoring the enduring legacy of ancient Egypt while embracing the possibilities of modern design. A timeless and contemporary masterpiece, this model is a standout contender for the “LandMark Inspired Design Contest”.</li></ul>&nbsp;A little bit of assembly is required;&nbsp;<ul><li>THE PARTS ARE NOT SUPPOSED TO FIT INTO EACHOTHER. The plateau part sits on top of the lightbox. Flip it over after you print it and glue it on top.</li><li>I recommend the Bambu Lab Jade White filament : <a target="_blank" href="https://eu.store.bambulab.com/en-ro/products/pla-basic-filament" rel="nofollow noopener">https://eu.store.bambulab.com/en-ro/products/pla-basic-filament</a></li><li>Print Both plates<img src="https://makerworld.bblmw.com/makerworld/draft/699030/2024-03-06_ebdb332fd15c5.jpg"></li><li>Glue the Giza Plateau model on the top of the lightbox, leaving an even contour along the box.</li><li>I used black tape on the inside walls to block light from escaping through the sides, but you also may print the walls of the base in black, making sure you leave the thin layers at the bottom white</li><li>Stick the led's to the side of the inside walls (I used battery powered led's for a cleaner look)</li><li>Ignore the supports, they are for some floating object that i couldn't manifold at this size.</li><li>The version for the A1 mini must be printed with a 0.2 mm nozzle due to the heavily detailed model being scaled down</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/699030/2024-03-06_ea199fbe01425.jpeg">&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699030/2024-03-10_56cddbd613f8f.gif"></figure>DO NOT USE FOR COMMERCIAL PURPOSES!

Giza Illuminated - The Great Pyramid Lightbox 

Decoration

补补觉去

对原作进行了加长，同时对一些细节进行了修改更便于无支撑打印，不需要金属件。如有需要可以底板涂点胶水。&nbsp;The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate.&nbsp;&nbsp;2024/3/19:增加了一款刀片，根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐，请注意安全。A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.&nbsp;2024/3/31:很多人想要短款的。我重新上传了75cm的版本。Many people want short styles. I re-uploaded the 75cm version.&nbsp;2024/4/7:我制作了一个梳子版本。I made a comb version.&nbsp;重新制作了带系绳孔的刀柄，并修复了非流形错误。Reworked the hilt with lanyard holes and fixed non-manifold bugs.&nbsp;加大了一点刀钮尺寸，放在源文件里的pin set V2.stl，如果还是太松可以用点胶水。Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-03-20_cc777c7f008d7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-04-07_83168edc957f7.jpg"></figure>

Longer Tiktok Gravity knife( Various styles )长款萝卜刀

Fidgets

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Brick Stackable Desk Boxes

Storage

Jory

专门为lucky13系列玩具设计的大剑，，它可以完美适配lucky13的标准持握手，非常易于打印和使用。使用它来丰富你lucky13的姿态和武器库！A large sword specially designed for the Lucky13 series toys, it can perfectly fit the standard grip of Lucky13 and is very easy to print and use. Use it to enrich your Lucky13 posture and arsenal!&nbsp;关注我，我会持续更新创作lucky13的系列装备 以下是其他专门为lucky13设计的武器： Follow me, I will continue to update and create the series of equipment for Lucky13 The following are other weapons specifically designed for Lucky13: 【三叉戟/Trident】<a target="_blank" href="https://makerworld.com/zh/models/242239#profileId-258208" rel="nofollow noopener">https://makerworld.com/zh/models/242239#profileId-258208</a> 【长刀/Blade】<a target="_blank" href="https://makerworld.com/zh/models/218626#profileId-237487" rel="nofollow noopener">https://makerworld.com/zh/models/218626#profileId-237487</a> 【长矛/Spear】<a target="_blank" href="https://makerworld.com/zh/models/218605#profileId-237469" rel="nofollow noopener">https://makerworld.com/zh/models/218605#profileId-237469</a> 【自定义标牌/Custom Tag】<a target="_blank" href="https://makerworld.com/zh/models/225251#profileId-243148" rel="nofollow noopener">https://makerworld.com/zh/models/225251#profileId-243148</a>【能量剑/Energy Sword】<a target="_blank" href="https://makerworld.com/zh/models/251526#profileId-267924" rel="nofollow noopener">【HALO】Energy Sword for dummy13 来自 Jory - MakerWorld</a>【武士刀/Katana】<a target="_blank" href="https://makerworld.com/zh/models/372407#profileId-272343" rel="nofollow noopener">Katana for Lucky13 来自 Jory - MakerWorld</a>【雷神之锤/Thor&#39;s Hammer】<a target="_blank" href="https://makerworld.com/zh/models/372428#profileId-272375" rel="nofollow noopener">Thor&#39;s Hammer for Lucky13 来自 Jory - MakerWorld</a>【火箭发射器/Rocket Luancher】<a target="_blank" href="https://makerworld.com/zh/models/410891#profileId-312830" rel="nofollow noopener">Rocket Launcher for Lucky13 来自 Jory - MakerWorld</a>