Galhardoro

lionblaze3120

Folding container for maximum 30 thin/medium/heavy picks. I used ordinary fender picks, the box lid closes perfectly on the top of each pick so they don't fall out of their slots.&nbsp;Print instructionsPrint it in place with no supports or assembly needed. The model shown was printed in Glow in the Dark PLA with 10% infill and .2mm layer height - any higher than that might make the hinge excessively clicky or not move at all.Once removed, gently bend the hinge until it clicks and should rotate freely.

Print-in-Place Guitar Pick Holder Box

Guitar

al.musawi.llc

Google Wifi wall or ceiling mount.

Google Wifi wall/ceiling mount

home

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

Atmadura

dalet11

This is a shorter version of the best Laptop Stand ever!<a target="_blank" href="https://makerworld.com/en/models/67488#profileId-71449" rel="nofollow noopener">Original Remix here.</a>&nbsp;<figure class="image image_resized" style="width:69.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/282902/2023-12-10_f9c5c73e3546c8.png"></figure>&nbsp;Compared to my original remix, this version is shorter by 28mm in height to be aligned with the tray height.It will also be more comfortable when needing to type the keyboard when the laptop is on the stand.&nbsp;Note that the original tray will fit this version, but it will be a bit tight - the tray height in this version was also reduced by 1.5mm for better fit - so if you already printed my original remix, check first if the original tray is ok for you before printing new one.&nbsp;—&nbsp;Based on TVL 3D design, I've improved it a bit to support also 15.6 inches laptops (originally fits only 13.3/14), and added a “stopper” to the tray so it won't come out when pulling.<h4>Features:</h4><ul><li>Tray to hold all your desk stuff.</li><li>support 14/15.6 inches laptops (tested with Asus TUF A15, Lenovo E14/15).</li><li>Cable holder that can fit anywhere at the sides.</li></ul>&nbsp;Dimensions : 360mm X 251mm X 104mm&nbsp;There are 3 plates to print, I recommend printing the tray and cable holder in different colors - it's beautiful!

Shorter - 14/15.6 Laptop Stand with Tray and Cable Holder

Xitao

Biskup

Holder for cheap projector Magcubic HY300 for IKEA MALM bed. But can be used for any bed with back width 40 mm or higher (if is bigger you can use spacers to fill free space).&nbsp;Hope You will like it!

Projector bed stand

Projector Holder

3DMN

Update 30.04.2024 I have included a larger incense stick holder in the files.Size: 240 x 233 x 61 mm with hole 1.3 mm.I have included a larger version of the incense holder called INCENSE HOLDER High.3mf in the STL files.&nbsp;Incense stick holder Size: 220 x 212 x 61 mm The hole for the incense stick is conical from 1.8 mm to 1.3 mm&nbsp;&nbsp;Size: 240 x 233 x 61 mm with hole 1.3 mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000145890/design/2024-04-30_c6a73c8be3ba4.png"></figure>

Incense stick holder

Incense Holder

Toys_And_Stuff

This is my latest and all new designed headphone stand. It is modular so you can choose if you want to mount it to the desk or use it with a stand.The parts are printed seperately and are all included in the print profile, so please be sure to print only the parts you need!After printing you have to push the Voronoi mesh into its place. Push it against the thin frame inside the main part, so the little bulges will snap it and hold it in its place.&nbsp;<figure class="image image_resized" style="width:50.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-27_7acc6970b0dcc8.png"></figure>&nbsp;<figure class="image image_resized" style="width:49.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-28_0388afc03baa6.png"></figure>&nbsp;Now you can mount the top part onto the lower part of your wish.&nbsp;<figure class="image image_resized" style="width:49.98%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-28_1585684b7d7ed8.png"></figure>&nbsp;&nbsp;Maybe the tolerances of your printer are a little bit different, so you may need a little bit of glue to fix the parts permanently.&nbsp;&nbsp;&nbsp;If you are looking for another headset/headphone holder, maybe you find the right one at my other designs.&nbsp;<h2>Headset Holder large and sturdy</h2><figure class="image image_resized" style="width:49.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-20_922321ff0133a8.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/145728#profileId-158579" rel="nofollow noopener">https://makerworld.com/en/models/145728#profileId-158579</a>&nbsp;<h2>Headset Holder Hexagon Style</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-23_dc42514e0911d8.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/154233#profileId-168605" rel="nofollow noopener">https://makerworld.com/en/models/154233#profileId-168605</a>&nbsp;<h2>Headset Holder small and sturdy</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-20_c31a19c14ae68.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/84247#profileId-90053" rel="nofollow noopener">https://makerworld.com/en/models/84247#profileId-90053</a>&nbsp;<h2>Headset Holder XXL Extra Large</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-25_e05b4c5ab5884.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/156121#profileId-170958" rel="nofollow noopener">https://makerworld.com/en/models/156121#profileId-170958</a>&nbsp;<h2>Headset Holder Under Desk</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462194/2024-01-20_b9b3265ff8d268.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/149114#profileId-162697" rel="nofollow noopener">https://makerworld.com/en/models/149114#profileId-162697</a>&nbsp;&nbsp;Happy printing!&nbsp;

Headphone Stand Modular

Custom Accessories 

Martin Kozak

<h3>Model</h3><ul><li>Model is 45 cm long, consists of 70 pieces and needs 720 g of PLA filament. Total print time is about 30 hours.</li><li>Biggest part is 214 x 118 mm and does not fit A1 mini build plate.</li></ul><h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/469116/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li><li><a target="_blank" href="https://makerworld.com/en/models/146718#profileId-159991" rel="nofollow noopener">https://makerworld.com/en/models/146718#profileId-159991</a></li></ul>

Helicopter 300 %

Vehicles 

Ocular Dynamic

Some brackets to use when putting up a shelf. I put a pair on each profile and there are 3 different sizes. 4cm, 8cm and 12cm.

Shelf Holder Brackets

Home Accessories

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_5f1uaq5tqz04.png"></figure><h4>Dimensions (LxWxH)</h4>170 x 83,88 x 53,43 mm (100% scale)<h4>Basic information</h4>Have you ever wanted to hold a Great white shark, or keep it as your pet? Here's a good alternative.This shark is divided into 7 articulated segments with 2 movable fins, which grant the model with lifelike feel, and movement. It's quick and easy to print, and doesn't require any supports.<h4>Files information</h4>I've included one file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_z81w1zxs9hqc.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>10%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, downscaling is easier, than ever before! If you have a well calibrated machine, you can downscale the model without any need for concerns. If you won't go way too crazy with downscaling, you shouldn't run into any issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using an adhesive spray, or an other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_jcskr84f88bu.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_csvj2i5i5nbc.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_9vzf67hm3kch.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Great White shark

Animals

wuguigui

<h2>Summary</h2>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.If you like it, please click "like“ it:)Thank you!A new one was designed based on this clip, with suction cup: <a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a><h2>Print Settings</h2>Printer: snapmaker 2.0 A250 Rafts: No&nbsp;Supports: No Resolution: 0.2&nbsp;Infill: 60% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener"> snapmaker PETG or PLA+ </a> any