galagana

Donum Ex Machina

This is a remix of a Fedora that has been molded to fit very nicely on the head of the MatMireMakes Platypus model: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-platypus-articulated-fidget-print-in-place-cute-animal-361678" rel="nofollow noopener">3D Printable Platypus, Articulated fidget, Print-In-Place, Cute Animal by MatMire Makes (myminifactory.com)</a>&nbsp;The 100% scale model of this fedora fits great on the 100% scale model of the platypus, and it scales down 1:1. I have not tested it below 50%, or above 100% so do so at your own risk.

Fedora - Molded to fit on head of MMM Platypus

Articulated

Archork

Introducing the epitome of modern elegance: the 3D Printed Geometric Vase/Lamp.&nbsp;Crafted with meticulous precision and innovation, this versatile piece seamlessly blurs the lines between function and artistry. Made from translucent PLA, it exudes a mesmerizing coolness, casting a gentle, ethereal glow when used as a lamp with a simple LED candle light inside.&nbsp;Its geometric design adds a touch of contemporary sophistication to any space, while the whimsical effect of translucence enhances its allure, creating a magical ambiance that captivates the imagination.&nbsp;Whether adorning your tabletop as a vase, illuminating your room as a lamp, or standing alone as a striking decor piece, this multi-functional marvel is sure to make a statement wherever it's placed.&nbsp;Experience the perfect fusion of geometric beauty and enchanting luminosity with the 3D Printed Geometric Vase/Lamp. Elevate your home decor and immerse yourself in a world of whimsy and wonder.

Translucent Geometric Vase / Lamp

Print Clear Parts

3ddyfaber

This is my latest 3d string project dedicate to SUPERMAN. &nbsp;Important:Print with h layer 0,2 mm and put ARACHNE in wall generator on Bambustudio.&nbsp;I raccommend not changing the measurement of the project.&nbsp;&nbsp;&nbsp;

SUPERMAN STRING led lamp

Superman LED Light

xonggg

When printing with PLA, it is often a good idea to keep the glass door or glass lid open to maintain a low chamber temperate. Otherwise, heat creep might cause the extruder to get clogged. This designs mounts securely onto the plastic lid tab and holds the glass lid open at a slight angle without any play.&nbsp;Files:GTR : original shown in pictures, uses 6x2mm magnets GTR - no magnets : Magnet features removed GTR - 5mm magnets : modified to use 5mm diamte magnets instead&nbsp;Requires:2pcs - 6mm (diameter) x 2mm (height) cylinder magnets&nbsp;Features:<ul><li>Robust and secure (worry less about it coming loose due to vibrations)</li><li>Holes for mounting magnet to store at the back of the printer (press fitted magnets)</li><li>Prints without support (there are some bridges)</li><li>Does not make contact with the glass, no foam needed to prevent scratching </li></ul>

[P1S/X1C] Glass Top Riser (Prop Stand)

Bambu P1S

Bambu A1 Drawer

OrangeSockNinja

MAKE SURE TO PRINT THE TOLERANCE TEST BEFORE PRINTING THE SABER. THIS SABER WAS TOLERANCED FOR PA6-GF AND MAY BE LOOSE FOR OTHER FILAMENTS&nbsp;Do you remember picking up a cardboard tube and thinking ‘this is kinda like a lightsaber&#39;? Well now you can print your own Cardboard Saber, inspired by those cardboard tubes used in paper towels or wrapping paper.  This saber is compatible with LGT hilts with circular charging ports and dual m3 screw mounting hardware such as these: <a target="_blank" href="https://viresabers.com/collections/standard-cores/products/golden-harvest-ghv3-pixel-core" rel="nofollow noopener">https://viresabers.com/collections/standard-cores/products/golden-harvest-ghv3-pixel-core</a>. It&#39;s important to note that the hex screws used to mount it should be M3x10 screws in order to properly mount the core to the hilt.&nbsp;Though any LGT core with the same charging port and mounting setup should work. I use a Proffieboard core personally. THIS SABER IS NOT FOR DUELING. As much as I would love to claim this hilt will hold up to a Sith attack, it would probably break if you tried to hit anything with moderate force. This hilt is more of a goofy showpiece than anything. 3D printing is great but there are limits and unfortunately for us, layer lines are a weak point for tubes like this. I haven&#39;t tested mine which is printed in PA6-GF, and probably has the best chance of holding up.&nbsp;HARDWARE: This saber uses x1 M3x5.7 heat insert thread and x1 M3x6 headless hex retention screw. These are the ones I used:M3 insert: <a target="_blank" href="https://www.amazon.com/ruthex-M3-Threaded-Inserts-RX-M3x5-7/dp/B08BCRZZS3/ref=sr_1_3_pp?crid=67UN86YCWGJU&amp;dib=eyJ2IjoiMSJ9.dQnK_YeiukKW_EpM-AFg47Fm6fvJIcHFE5Gy5SqzHs3B7NjVhHlyz1HxUY2JSdVhGNgt3vSFtwZdP-0AXsfT4JpsUsznLoVM7DBAFGBkPHccIWfM8JJegeQG0Awm3msSFKItWhv3B84s-mvKgELSylUm-ZGMAZJpUmcxmHNee8sssjdwe54EJtiRbl3ACSUf3y8XZXQlnS7rEtsgYTXkUi_CIE0YWPMQsewCPV67JPQ.SQ2uAGYuVDjP5BGa98FBInSKFxATGdVpVHc37mo3vY8&amp;dib_tag=se&amp;keywords=ruthex+m3x5.7&amp;qid=1712089668&amp;sprefix=ruthex+m3x5.%2Caps%2C176&amp;sr=8-3" rel="nofollow noopener">https://www.amazon.com/ruthex-M3-Threaded-Inserts-RX-M3x5-7/dp/B08BCRZZS3/ref=sr_1_3_pp?crid=67UN86YCWGJU&amp;dib=eyJ2IjoiMSJ9.dQnK_YeiukKW_EpM-AFg47Fm6fvJIcHFE5Gy5SqzHs3B7NjVhHlyz1HxUY2JSdVhGNgt3vSFtwZdP-0AXsfT4JpsUsznLoVM7DBAFGBkPHccIWfM8JJegeQG0Awm3msSFKItWhv3B84s-mvKgELSylUm-ZGMAZJpUmcxmHNee8sssjdwe54EJtiRbl3ACSUf3y8XZXQlnS7rEtsgYTXkUi_CIE0YWPMQsewCPV67JPQ.SQ2uAGYuVDjP5BGa98FBInSKFxATGdVpVHc37mo3vY8&amp;dib_tag=se&amp;keywords=ruthex+m3x5.7&amp;qid=1712089668&amp;sprefix=ruthex+m3x5.%2Caps%2C176&amp;sr=8-3</a>Retention Screw: <a target="_blank" href="https://www.amazon.com/HanTof-Stainless-Assortment-Wrenches-Cup-Point/dp/B07CKFJ8GY/ref=sr_1_3?crid=RTKWGGI03BN5&amp;dib=eyJ2IjoiMSJ9.uxbidLxXfCMz88Ys61kOYtBZJrYOHMS185d3o62AAO6VHCZtzra31GEHcP_VlJ8NzMEE02k7gRXYbBEw4sBf0JBhW4R8neBLEMAxKeNkmPbVhbfSMxwvU_0fgODsJvhWctAa0ha6erUQ3ExoKFU3rrZxvnp_EX6UEyas501Zebpv0TmgRD1vJjvXpqGTHXGBQdQlVgywaA9JRkhoTKVP19qU6ou43LkUbzvaBUVWqcI.7OFRPIMrYWAS6KbptgBR7_mCVR8Jp27J-swejzTa4xI&amp;dib_tag=se&amp;keywords=m3+headless+screw&amp;qid=1712089831&amp;sprefix=m3+headless+screw%2Caps%2C133&amp;sr=8-3" rel="nofollow noopener">https://www.amazon.com/HanTof-Stainless-Assortment-Wrenches-Cup-Point/dp/B07CKFJ8GY/ref=sr_1_3?crid=RTKWGGI03BN5&amp;dib=eyJ2IjoiMSJ9.uxbidLxXfCMz88Ys61kOYtBZJrYOHMS185d3o62AAO6VHCZtzra31GEHcP_VlJ8NzMEE02k7gRXYbBEw4sBf0JBhW4R8neBLEMAxKeNkmPbVhbfSMxwvU_0fgODsJvhWctAa0ha6erUQ3ExoKFU3rrZxvnp_EX6UEyas501Zebpv0TmgRD1vJjvXpqGTHXGBQdQlVgywaA9JRkhoTKVP19qU6ou43LkUbzvaBUVWqcI.7OFRPIMrYWAS6KbptgBR7_mCVR8Jp27J-swejzTa4xI&amp;dib_tag=se&amp;keywords=m3+headless+screw&amp;qid=1712089831&amp;sprefix=m3+headless+screw%2Caps%2C133&amp;sr=8-3</a>These are technically necessary for holding the blade in place, as the fitment of the blade is pretty snug. If you don&#39;t have the hardware, you might be able to get away without. I wouldn&#39;t recommend spinning it like this though, the blade might fly out.  I should also mention that this saber should be printed with durability and toughness in mind. While I&#39;m sure you could print this in PLA, I cannot guarantee that it will be able to hold a blade. Carbon Fiber and Glass Fiber filaments are recomended, both for surface finish and for strength. I printed mine in brown PA6-GF and it came out great. It needed a little post processing though.&nbsp;Something of note: I used OrcaSlicer and for this I used “precise walls” to get the accuracy that much closer to what I had designed. For testing purposes I printed one without it and the tolerances were tight for the blade. It may be different for other filaments but at least for PA6-GF, make sure to use OrcaSlicer with Precise Walls. I&#39;m not sure if the feature is available in Bambu Studio.&nbsp;Let me know what you think! This is my first real attempt at something like this.

The Cardboard Saber

Lightsaber Hilt

drewp393

Note: Make sure you open this profile on a computer, Bambu Handy will overwrite the profile. This was tuned on my A1 with 0.6mm nozzle, your results may vary. Following the standards I established here: <a target="_blank" href="https://makerworld.com/en/models/195124#profileId-215611" rel="nofollow noopener">https://makerworld.com/en/models/195124#profileId-215611</a> &nbsp;Tuning Profile:<ul><li>Pressure Advance 0.017</li><li>Flow Rate: 0.91</li><li>Ironing Flow: 23%  </li></ul>

Polymaker PLA Profile with Ironing

Ironing Test

braga3dprint

Introducing my latest design: a super cute and simple bunny lightbox! 🎉 Whether you&#39;re a fan of adorable decor pieces or looking for a fun project to try out, this bunny lightbox is perfect for you! 🌟 If your the video or files were useful consider boosting, it&#39;s free!&nbsp;The raw files for both lightbox and filament settings are available and ready to be imported into Bambu Studio. However, to ensure the best results for your prints, I highly recommend running your own filament calibration. &nbsp;Dry Your Filament: Ensure your filament is properly dried before calibration. Flow Rate and Flow Dynamics Calibration: Fine-tune your flow rate and flow dynamics settings to optimize filament extrusion. Temperature Towers: Conduct temperature towers to find the ideal temperature for your filament. Feel free to experiment with my settings, but don&#39;t forget to run your own calibration tests to achieve the perfect results for your lightbox creations!&nbsp;But wait, there&#39;s more! 🎥 I&#39;ve also created a step-by-step tutorial on YouTube showing exactly how to make this exact model. If you&#39;re interested in learning how to create your own bunny lightbox, feel free to check out the tutorial here:&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/6VUHmFcwIGM?si=h885dFnr8B7Oq5uC"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6VUHmFcwIGM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Happy crafting, everyone!

Lightbox Tutorial Easter Bunny Lightbox LED Lamp

Lightbox

Windrose

This is a tolerance test for print in place hinges. These are the same style of hinges I use in my <a target="_blank" href="https://makerworld.com/en/models/417495" rel="nofollow noopener">Articulated Hexapod</a>, <a target="_blank" href="https://makerworld.com/en/models/249434#profileId-265706" rel="nofollow noopener">Pop-up Catapult</a> and <a target="_blank" href="https://makerworld.com/en/models/219958#profileId-253935" rel="nofollow noopener">Latching Box</a> print in place models.&nbsp;Depending on the model, different levels of hinge tightness may be required.&nbsp;For example, the hinge connecting a box and lid should be fairly loose. You want it to swing freely so the box is easy to close. But for a poseable figure, you want the hinges to be loose enough so that they&#39;re easy to move, but tight enough to stay in place once positioned.&nbsp;You can use this test to calibrate the spacing that works best for your printer, material, and print settings.&nbsp;Print this with the same material and settings you plan to use for the print in place model you wish to print. No supports necessary.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=trkjiBzkj1E"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/trkjiBzkj1E" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Print in Place Tolerance Test

itsjulesmaley

Good day everybody.&nbsp;I designed this charging stand to add a bit of functionality to my desk. The bottom plate has under the knobs a hole for 6x3 neodym magnets. So make sure when you slice this to add a pause on the exact layer height to insert the magnets. You can also let the magnets out and glue it together if you want. &nbsp;I printed this in PETG and PLA both worked well. But i would prefer to print this in PLA because of the overhangs. &nbsp;Happy printing and greetings from Bavaria :).&nbsp;

Apple iPhone/Watch charging stand

iPhone-Apple Watch Stand

TonyLing

Remixed <a href="https://www.printables.com/model/142518-magic-band-2-strap-keeper-current-magicband" rel="nofollow">Magic Band 2 Strap Keeper by DuaneL</a> and increased the inner width by 0.5mm and inner length by 1.0mm. The special edition MagicBand+ bands I have are slightly thicker than my older MagicBand2 straps. The increased sizes also factors in printing using PETG instead of TPU (TPU is more flexible). The strap keeper is designed for the adult strap sizes and not tested with the kids size. Pictured strap keeper printed with 4.0mm nozzle, 2.0mm layer height, clear PETG.

MagicBand+ (Magic Band Plus) Strap Keeper

Magicband+

warrell72

&nbsp;This model faithfully recreates the iconic door of Shug Drabor's personal cabin from Galactic Starcruiser. Designed to be a 1:1 scale replica, this model captures the details of the original door, allowing you to bring a piece of the Galactic Starcruiser into their own homes.&nbsp;OverviewCelebrate the rich lore and storytelling of the Star Wars universe, immerse yourself in the experience of the Galactic Starcruiser. There are three printing options available: the skirting profile cut version, the flush mount version, or the mini kit card version.&nbsp;Parts count: 12 main parts, 8 connectors 20 total.&nbsp;Key Features<ul><li>Faithful Recreation: The model faithfully reproduces the distinct design elements of the door, including engravings, and symbols, as seen in the Galactic Starcruiser.</li><li>Emulate Tradition: Emulate the tradition of passengers knocking on the door for good luck, interact with the door just like you would onboard the Galactic Starcruiser.</li><li>Dimensional Accuracy: Careful attention is paid to ensure that the dimensions of the replica match those of the original door, providing an authentic representation of Shug Drabor's personal cabin entrance.</li><li>Modular Design: To maintain the scale of the original and allow for printing within the Bambu 256 × 256 × 256 mm³ build volume, the frame has been sliced into four quarters. The seams are well hidden using design elements, eliminating the need for post-processing. The four quarters are joined together using dog bone connectors, ensuring a seamless assembly without the need for glue.</li></ul>Printing Details&nbsp;Recommended filaments: <ul><li>eSUN PLA+ Black</li><li>eSUN PLA+ Bone White</li><li>eSUN PLA+ Silver</li><li>SUNLU Silk PLA Plus Light Gold</li></ul>Hotend: 0.4mm Hardened SteelPrint time: 20hrs+&nbsp;Printing Tips: Use the print profile provided for the best results.&nbsp;Assembly&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_a2e305a9f1e4a.jpg"><figcaption>Gather the four frame components and the 8 dog bone connectors (6 x 21.5 and 2 x 26)</figcaption></figure><figure class="image image_resized" style="width:50.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_451088d49c9c8.jpg"><figcaption>Push the 6 21.5mm dog bone connectors in to the holes in the door recess and 2 26mm dog bone connectors into the mid plate panel on the right. The tolerance here is intentionally very tight, after pushing them all in some of the way you can begin to knock them in all the way.</figcaption></figure><figure class="image image_resized" style="width:50.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_eae902761b67f.jpg"><figcaption>Next take the top and bottom door components and x 4 8mm lengths of filament, these will be used as dowels to join and align the two parts. </figcaption></figure><figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_dcdb80b418734.jpg"><figcaption>The receiving holes can be tight so be careful not to snap any filament off inside, a 1.75mm drill bit is a great investment for reaming out holes like these. Add a dab of glue and insert all four into one half.</figcaption></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_d972301d7ef96.jpg"><figcaption>Add glue to the other hald and press together.</figcaption></figure><figure class="image image_resized" style="width:50.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_8e0b9e5e45185.jpg"><figcaption>Gather the assembled frame and door, apply glue to the door recess and place the door on top. The door will self locate into the recess.</figcaption></figure><figure class="image image_resized" style="width:50.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_97c551e5ee4ff.jpg"><figcaption>Apply glue to the top panel recess and place the top panel in to the recess the panel will self locate in to place.</figcaption></figure><figure class="image image_resized" style="width:50.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_332b14abb268d.jpg"><figcaption>Apply glue to the mid panel recess and place the mid panel in to the recess, the panel will self locate in to place.</figcaption></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_ab2975e5c0be1.jpg"><figcaption>Apply glue to the lower panel recess and place the lower panel in to the recess, the panel will self locate in to place.</figcaption></figure><figure class="image image_resized" style="width:50.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_e2173b6c234aa.jpg"><figcaption>Apply glue to the room number panel recess and place the room number panel in to the recess, the panel will self locate in to place.</figcaption></figure><figure class="image image_resized" style="width:50.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_086faf8eb2012.jpg"><figcaption>Apply glue to the door sign panel recess and place the door sign panel in to the recess, the panel will self locate in to place.</figcaption></figure><figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/579845/2024-02-24_5d2b31708650b.jpg"><figcaption>Congratulations you have now fully assembled your very own Shug Drabor's Personal Cabin Door.</figcaption></figure>

Anzellan Shug Drabor's Personal Cabin Door from the Galactic Starcruiser

Starcruiser

Embark on a journey to a galaxy far, far away with this coaster inspired by those available from Oga's Cantina on Batuu Star Wars: Galaxy's Edge – the perfect companion for your favorite drinks! Whether you lean towards the light or embrace the dark side.&nbsp;OverviewThis set of six coasters is inspired by those available at Oga's Cantina on Batuu in Star Wars: Galaxy's Edge at both Disney World and Disneyland California. This core set of six can be printed alongside a limited edition set of four designs, which are no longer available in the parks, and complemented by the coaster display stand. Both other models are available in my <a target="_blank" href="https://makerworld.com/en/u/2029960715" rel="nofollow noopener">profile</a>.&nbsp;Parts count: 6&nbsp;Key Features<ul><li>Inspired by the iconic Oga's Cantina at Star Wars Galaxy's Edge.</li><li>Dimensions: 100mm in diameter, 4mm thick.</li><li>4 color prints.</li><li>Pre-sliced.</li><li>Tuned print profiles.</li><li>Provision to add no-slip feet to the back.</li></ul>Printing Details&nbsp;Recommended filaments: - eSun PLA+ Cold White - eSun PLA+ Black - eSun PLA+ Bone White - eSun PLA+ Fire Engine Red&nbsp;Hotend: 0.4mm Hardened SteelPrint time: Each coaster typically prints in about 45-75 minutes&nbsp;Printing Tips:<ul><li>Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.</li><li>The Cantina Code coaster uses Light and Dark Purple, as well as Tan.</li><li>The Star Liner coaster uses Grey and White.</li><li>Printing with an AMS is necessary for optimal results.</li><li>The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.</li><li>Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.</li><li>Due to the intricate details in the Bloody Rancor design, the colors and design elements do not load properly on the prepare screen when viewed from underneath. However, once the design is sliced, the colors become visible in the preview and will print without any issues. Please refer to the screenshots below for clarification.</li></ul><figure class="image image_resized" style="width:15.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_335f4c80444f6.webp"><figcaption>Prepare Screen</figcaption></figure><figure class="image image_resized" style="width:14.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_0fe13665b1b2c.webp"><figcaption>Preview - After Slicing</figcaption></figure>&nbsp;AssemblyAdded to the files is a jig which helps with even placement of non-slip Silicone Pads (6 x 2mm). Which can be purchased on <a target="_blank" href="https://www.amazon.co.uk/Silicone-Adhesive-Protector-Transparent-Furniture/dp/B0BJDKRDTQ/ref=sr_1_3?crid=1U16NOKJI68AU&keywords=runner%2Bfurniture%2Bdots&qid=1706609474&sprefix=runner%2Bfurtinature%2Bdots%2Caps%2C65&sr=8-3&th=1" rel="nofollow noopener">Amazon</a>&nbsp;<figure class="image image_resized" style="width:35.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_f344669d0a448.jpg"><figcaption>Place the Jig on top of the coaster, the tolerances is tight so should snap on.</figcaption></figure><figure class="image image_resized" style="width:35.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_e4736b26990f3.jpg"><figcaption>Add the self adhesive silicon pads through the holes.</figcaption></figure><figure class="image image_resized" style="width:35.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_f472bcda81d26.jpg"><figcaption>Remove jig, your coaster are now non-slip and safe for your drinks.</figcaption></figure>May your libations be as legendary as the tales told in the Outer Rim. May the Force be with you!

Oga's Cantina - Core set of 6 Star Wars: Galaxy's Edge Coasters

Star Wars Coasters

Bambu Lab

This is an Official Heatbed Cable Protector for the Bambu Lab A1 3D printer.To install, follow these easy steps:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/458892/2024-01-27_f2efaaf8fd686.gif"></figure><ol><li>Ensure proper alignment by verifying that the arrows on both halves are directed toward the cable root.</li><li>Securely fasten the two halves until a snug and flush connection is achieved.</li></ol>

A1 Heatbed Cable Protector

Bambu A1

Roland Deschain

My printing profiles for Overture TPU on the Bambu Lab P1P that you can use as a starting point.The 3MF includes both a filament and 0.20mm process profiles.If you come up with better settings I would love to hear about them in the comments.&nbsp;Warning: If you print a third party profile you may not be getting the latest version or the highest quality print. &nbsp;If you like this project, please don't forget to ❤ Like and ★ Rate!

Overture PLA Silk Filament and Process Profiles (Bambu Lab P1P)

Bambu Silk Filament Printing

Wyze Can Mounts

Apple Watch Dock

Henryb2015

I wanted to display my funko's out of the box but also wanted to keep the box with them This is what I came up with. I did make it a little larger than needed so it would fix the box with or without a protector on it. If you want it to fit your box snug, you will need to resize a small amount. I think it looks great as it is. You can see in the pictures it's not too big.

Funko out of box shelf

Funko Stands

IceGabrielito

That's another HueForge model! It's ready to be printed.&nbsp;&nbsp;If you want, here you have text file from Hueforge:&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;&nbsp;Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White&nbsp;&nbsp;Swap Instructions: Start with Black At layer #6 (0.6mm) swap to Red At layer #12 (1.08mm) swap to Yellow At layer #18 (1.56mm) swap to White for the rest.

Star Wars Darth Vader (HueForge)

HueForge

SavageLau

Hey guys, this is my table organizer design for MakerWorld Office helper contest. (3/5)&nbsp;This design have many elements. Please check detail description and print profile break down below:All design is muti-color capable, but takes really long time to print.This design have some big first layer models. Make sure you clean your build plate, and enable bed leveling before prints. Some of the boxes edges might very easy to curve up, if you fail to do so.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_35ec2371ea6de.png"></figure>&nbsp;<h2>Elements:</h2><h3>Tunnel:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_1e83b412309e9.png"></figure><h3>Block box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6d6e9fe944d04.png"></figure><h3>Question box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_f36ac575df8b9.png"></figure><h3>Star and coin container:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_5810c509a6e7e.png"></figure><h3>Bucket:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-26_d13696b40a3b.png"></figure><h3>Holder 4 & 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6b8e4c56fd1e2.png"></figure><h3>Drawer 4 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_b9b71497afbdd.png"></figure><h3>Drawer 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_be968b6848ba9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_54f4281440f91.png"></figure>&nbsp;<h3>Muti-color:</h3>It is very easy to paint the model. But takes way too long to print, so I did not put it on my printing profile. You can try it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_ce2597d7373d2.png"></figure>&nbsp;<h2>Filaments color: </h2>@dprodriguezf was comment regarding filament colors, here is the lists:Tunnel: Bambu Lab PLA (Green)Coin/Start container: Creality Ender PLA (Skin)Questions box: Sovol PLA (blue)Bucket: R3D UV-color change PLA (Pink)Short block: wood, R3D UV-color change PLA (Purple)Longer block: Giantram PLA (Blue Marbel), Giantram PLA (Matte Terracotta)Drawer 3 slots: Creality HP Series (Matte red)Drawer 4 slots: 3DF (Coral)

Modular Mario desk organizer

Super Mario Bros

grecdel

Hi everyone&nbsp;This is my first contribution to makerworld.A Spiderman's portrait worked on HueForge.&nbsp;<ul><li>Bambu Lab Black to layer #5</li><li>Bambu Lab Red to layer #12</li><li>Bambu Lab Blue to layer #18</li><li>Bambu Lab White to layer #24</li></ul>&nbsp;Enjoy!

Spider man (HueForge)

Spiderman

redGibb

This is a protection ring for cardboard filament spools from ELEGOO.

AMS Ring for ELEGOO Cardboard Filament

AMS Filament Ring

fay3dlab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516818/2023-11-27_8537960efed01.gif"></figure>Here's a new suspended model from my star wars collections.. this time its the Imperial Tie Advance X1 fighter that Darth Vader flew.. as always i remix the fighter ship from thingerverse's Andrew Diehl who modified the model to be printable from Chanson Yang from grabcad.. The model is a simple single print of a skewed hexagon frame with the tie adv in the middle.. this will give it the effect that the tie fighter is climbing and going upwards.. As always i made the frame to look like Deathstar.. This one is a fairly simple print.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie adv fighter&nbsp;: UPDATE 1 :Someone suggest to separate the ship, strings and the frame so that you can easily put multicolor filament on each of the parts.. so i've uploaded a new version for multicolor prints.. do test it out and tell me if it works.. &nbsp;:UPDATE 2:i have added a LED strip addon that you can attached to the suspended tie fighter.. you dont need to print the whole suspended model again.. the addon uses 50cm LED strips inserted into the addon channel.. you can download the addon here: <a target="_blank" href="https://makerworld.com/en/models/132714#profileId-143896" rel="nofollow noopener">https://makerworld.com/en/models/132714#profileId-143896</a> <img src="https://makerworld.bblmw.com/makerworld/draft/516818/2024-01-11_575645cf6738f.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/516818/2024-01-11_8989eb4b2a91c.jpg">&nbsp;

Suspended Tie Advance X1

Star Wars

Ocean 3d Maker

<h3>Starwars Grand Admiral Trawn badge for cosplay</h3>

Grand Admiral Trawn Imperial Badge

Star Wars Imperial Rank

Elessar3141

This are simple coasters with the Star Trek Badge and colored for the AMS :) I hope you will enjoy them :)

Star Trek Coaster

Star Trek Coasters

Marc Elbichon

Cuty toon cat coasters&nbsp;Holder is included for organization&nbsp;Happy printing!

Cat Coasters

TheHarmory

A Star Wars themed design I made for the extruder rotator (or how should we call this?). Using 2 filament colors, all set up in the 3mf &nbsp;Please note: different filaments can have different properties. For me I had a perfect fit with white and black filament. If the fit is not perfect, please scale with 1 or 2% and make sure to use the “uniform” scaling option. &nbsp;More designs will follow

A1 Mini, Star Wars themed Extruder Wheel Star Wars Logo

Star Wars Extruder Button

JifStevvon

Hopefully a fun little easy print. This is my first time releasing anything I've modelled so please any constructive feedback is always welcomed.&nbsp;This prints just a simple Star Wars Kenner Toy Style Card Back, Can be made into a photo frame or just used as is. Two options available one with the Kenner logo one without. Both are set to print with a smaller keychain size card back set to flush into object to reduce filament waste. &nbsp;Also included a glass shape if anyone wants to laser cut and use it as a frame, and a negative value that would help cut a lithophane to the frame size if you wanted to go that route.

Star Wars Cardback Placard

Star Wars Backing

Picture_it

I used silk silver for this one. The lights don't shine through it as well as the ones I made with regular filament. I'm waiting for some LED's from Amazon, I think they will make a nice differnece. You could also use just regular white filament, or any colour. Blue looked nice when I was experimenting. I used battery operated fairy lights on wire from Amazon, and glue dots to hold them in place on the back wall.

Star Wars Light Box

Star Wars Lightbox

hobby printing

star wars lithophane

Star Wars Lithophane

R3DPanda

PTFE Remover tool with a very simple handle. Usefull if you find the PTFE tubes hard to remove from the extruder of the A1 printers even with the official PTFE Remover tool provided by BambuLab here: <a target="_blank" href="https://wiki.bambulab.com/en/a1-mini/maintenance/ptfe-tube" rel="nofollow noopener">https://wiki.bambulab.com/en/a1-mini/maintenance/ptfe-tube</a>Check the link above for a tutorial. Consider printing the new version instead: <a target="_blank" href="https://makerworld.com/de/models/79328#profileId-83766" rel="nofollow noopener">https://makerworld.com/de/models/79328#profileId-83766</a>