This is probably the best mount supporting Panda Touch. While the instructions were not clear, it worked out great - I'll upload some pics to clarify. The panda Sense comes with 4 x m3 brass inserts 2 x m.2.5 brass inserts All necessary screws. We have to use 2x m3 inserts for the top 2 display base screws, the 2x m2.5 inserts for the bottom 2. The other 2 x m3 brass inserts are for the Panda Sense PCB mounted from the reverse side. My mistake - I used 6(+3) x m3 inserts for all screw holes. So I used 2 original m3 long screws from Panda Touch for top and the ones with panda sense for the bottom 2. It worked fine, but I could have used the original Panda Touch long screw for the side cable cover - I used an extra m3 i had handy. Also note - we also need 3 more m3 brass inserts for the side screw holes. The original P1S display is a snug fit - mounted it first to finish cable management before I screwed on the display base. Refer to pics for clarity.. Big Thumbs UP !!

The print turned out great overall. Very happy with the results. Printed with Creality Hyper PLA black/white. While the front plate worked out great with the textured pei plate, The back warped while printing because I didn't use glue. Ended up printing the back without glue on the Cryogrip glacier plate and it turned out great without the glue.