funkadelik

PrintFarm24

200 Euro Schein - PERFEKT ALS GUTSCHEIN / GESCHENK200 Euro note - PERFECT AS A VOUCHER / GIFT&nbsp;Layer 1 - 2 = JAYO BLACK / SCHWARZLayer 2 - 7 = JAYO GRAY _ BLUE / GRAU - BLAULayer 7 - 17 = JAYO YELLOW / GELBLayer 17 - 21 = JAYO WHITE / WEIß&nbsp;The colors can be seen in the background in picture 1Ihr könnt die Farben im Hintergrund auf Bild 1 sehen&nbsp;If you use similar colors you should get a good result.Wenn ihr ähnliche Farben verwendet sollte auch ein gutes ergebniss erzielt werden.&nbsp;The colors were optimized again after my print&nbsp;&nbsp;Update 02.2024&nbsp;Slicer settings changed - error in color gradient. Thanks to Timbo :)Slicer-Einstellungen geändert - Fehler im Farbverlauf. Danke geht an Timbo :)&nbsp;&nbsp;

HueForge 200 Euro Geldschein Geschenk Gutschein VOUCHER SAMPLE

Schidter

I hope you enjoy the model I've had fun tinkering with. Please see some notes below which might improve your experience:&nbsp;No outside materials required! Rubber bands and glue are totally optional.&nbsp;When removing the card from the bed, do so gently or the connections may break.&nbsp;If the plane doesn't behave the way you want it to, bend the foils. For my prints, bending the foils on the rear wing downward made it fly nice and smoothly.

DIY Glider Kit Card - Flies Great!

sacha

RobDrivesCars

This was developed for The Drive's Great Ford Maverick 3D Print-Off where auto journalists Rob Stumpf (<a href="https://twitter.com/RobDrivesCars" rel="nofollow">@RobDrivesCars</a>) and Peter Holderith (<a href="https://twitter.com/_baldtires" rel="nofollow">@_baldtires</a>) spent two weeks building accessories for the Ford Maverick's FITS system.You can read more about it here: <ul><li><a href="https://www.thedrive.com/tech/its-time-to-vote-on-the-drives-best-ford-maverick-3d-printed-accessory" rel="nofollow">https://www.thedrive.com/tech/its-time-to-vote-on-the-drives-best-ford-maverick-3d-printed-accessory</a></li><li><a href="https://www.thedrive.com/tech/i-3d-printed-a-heated-and-cooled-cupholder-for-the-base-ford-maverick" rel="nofollow">https://www.thedrive.com/tech/i-3d-printed-a-heated-and-cooled-cupholder-for-the-base-ford-maverick</a></li><li><a href="https://www.thedrive.com/news/our-first-3d-printed-ford-maverick-accessories-are-taking-shape" rel="nofollow">https://www.thedrive.com/news/our-first-3d-printed-ford-maverick-accessories-are-taking-shape</a></li><li><a href="https://www.thedrive.com/news/were-building-crazy-3d-printed-ford-maverick-accessories-and-we-want-your-ideas" rel="nofollow">https://www.thedrive.com/news/were-building-crazy-3d-printed-ford-maverick-accessories-and-we-want-your-ideas</a></li></ul>

Headrest Mount for Ford FITS (Ford Maverick)

voiture

ShakaStudio

This is part of a Set: <img src="https://makerworld.bblmw.com/makerworld/draft/94352/2023-10-11_e110fb66a08e.jpg">&nbsp;Frame 01 - <a target="_blank" href="https://makerworld.com/en/models/39255#profileId-38273" rel="nofollow noopener">https://makerworld.com/en/models/39255#profileId-38273</a> Frame 02 - <a target="_blank" href="https://makerworld.com/en/models/40788#profileId-40725" rel="nofollow noopener">https://makerworld.com/en/models/40788#profileId-40725</a> Frame 03 - <a target="_blank" href="https://makerworld.com/en/models/42101#profileId-42689" rel="nofollow noopener">https://makerworld.com/en/models/42101#profileId-42689</a>&nbsp;This model has been carefully designed to look great with 4 colors. This is an easy to print 4 color Filament painting to add to your other Halloween décor.Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier. If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm&nbsp;Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Night Gray / Dark Gray At layer #10 (0.96mm) swap to Matte Grey / Light Gray At layer #14 (1.28mm) swap to White for the rest.

Halloween Day of the Dead 02 - 4 Color Hueforge Filament Painting

deco

Wekster

if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster

Mini Spiderman - Homecoming

figurine

Amao Chan

This is an African elephant with 22 movable joints. The joint design of this elephant is different from the common chain-like design. These joints can be adjusted and fixed at different angles, allowing the elephant's trunk to be lifted and posed in various preferred positions. The tightness of the joints depends on the hardness of the materials used for printing. Using harder materials will result in tighter joints.&nbsp;The reason it is named "Blank" is to encourage the printer to add color to the elephant's body. For those with multi-color 3D printers, they can try printing each segment in different colors.&nbsp;When printing, please start by printing the tail. If the tail can rotate properly, then use the same printing settings to print the other parts. If the tail gets stuck and cannot rotate, please reduce the material flow to continue printing.&nbsp;3D printing settings Layer height - 0.2mm Infill Density - 12% No supports. <a target="_blank" href="https://www.facebook.com/amaochanstudio/" rel="nofollow noopener">https://www.facebook.com/amaochanstudio/</a> <a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a>&nbsp;多關節素坯非洲象這是一隻有22個可轉動關節的非洲象這隻非洲象的關節設計與常見的鍊條式的設計不同，這種關節可以調整角度後固定，因此這隻大象的鼻子可以抬起並且擺出自己喜歡的姿態。大象的關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。之所以取名為(白胚)的原因，就是鼓勵列印者能幫大象的身體上顏色，若有多色3D列印機的朋友就可以試著在每一段使用不一樣的色彩列印。&nbsp;列印建議 列印時請先列印尾巴，若尾巴能正常轉動，就以相同列印設定來列印其他部分。若尾巴卡住無法轉動，請減少材料流量來列印。 層高-0.2mm 免支撐 填充-12%

BLANK ELEPHANT

articulée 

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

utiles 

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.