fsalac

Fyrby Additive

V-Spooler

3D printer

Martin Kozak

<h3>Model</h3>Print profiles have been divided by color.&nbsp;<h3>Postprocessing</h3><ul><li>Remove supports (some parts have pre-modelled supports, some have slicer supports, some combination of both).</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/424155/2023-12-30_7f665c461fbba.jpg"></figure><ul><li>Please use 4pcs of M2 screws to join 50163_a (black) and 50163_b (dark grey) parts together. Inner gear must rotate freele in outer ring.</li><li>TPU beams are split into two halfs. Please gluew two and two rods together. Insert filament into center hole to reinforce the connection.</li></ul><h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li></ul>&nbsp;

Compact Excavator 300 %

Flotschi

This is my version of a shoe stacker to attach to the wall.&nbsp;&nbsp;You can attach as many elements as you want on top of each other. Of course you can also attach them next to each other.<figure class="image image_resized" style="width:33.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/274126/2023-12-16_f4cf9b2431fd28.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:33.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/274126/2023-12-16_5f7622477f4638.jpg"></figure>Print position of the mainbody. Its important to print it lying on its side!Use the function “Combine Infill Layers” in your slicer. Saves a lot of time and the model ist still strong enough. &nbsp;&nbsp;The middle rail is used to connect the elements to each other when they are attached to the wall. The second rail is used to attach the elements above and below. Each rail requires 2 screws.&nbsp;The rails are tight. If you have trouble attaching them, take a cloth and tap it slightly with a hammer.<figure class="image image_resized" style="width:20.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/274126/2023-12-16_33950195ea416.jpg"></figure>&nbsp;&nbsp;The shoe stacker is very solid and requires some filament and print time.&nbsp;My version fits adult shoes very well. If you want it a little smaller or larger then scale the model including the rail in your slicer to your desired size.&nbsp;The version in the pictures is printed with Extrudr PLA NX2 with 15% infill and 3 wall lines.&nbsp;Hope you like it.&nbsp;Enjoy&nbsp;&nbsp;

Wall Mounted Shoe Stacker

camper

ronindesu

I liked the original, but wanted a screw hole for mounting.So I added a hole with a support boss around it on the arm. I also made a hole under the charging disc, just because maybe someone will want it. Lastly, I oriented it so it would be ready to print on FDM printer.Works just fine attached to the wall with a 1.25" drywall screw. My Watch is charging on it now.Nice design berky93!Settings: 3 tops, 3 bottoms, 2 perimeters, 20% fill, .25mm layer height, no supportsCategory: Electronics

Apple watch wall charger

fronta

3D printer

max

camper

fronta