foxtrot.factory

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/4cca814b-4b11-4bac-b93b-13fad0445fb7">For those who need a little more variety in their carrot garden, I decided to expand on it to make a full fidget garden 🌽🥦🍅 I have included the small (collapsible/expanding) carrot and added a rotating radish (spinning top), a bouncy broccoli, a corn on the cob fidget (with rotating rows of corn) and two different dirt beds + planter boxes (long or square) options. &nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/11b6fec2-ec29-47b6-9350-dd3e7a7a5ddf">Small Carrot3D PRINTING SETTINGSLayer Height 0.2mmPLA works great15% Infill&nbsp;Plate #1: Small Carrot (two colors)&nbsp;Note: I recommend printing carrots on a smooth print plate (can use glue stick/hair spray to help with first layer adhesion if necessary).&nbsp;Also to cut down on purge waste but still get a multicolor print you can pause the print at layer height 31.0 mm (layer 155) to change out the filament color.&nbsp;Rotating Radish3D PRINTING SETTINGSLayer Height 0.2mmPLA works greatInfill (this is important!):Print the Radish Top and Peg with 15% infillPrint the Radish Bottom with 60-70% infill (this is important because it lowers the center of gravity and helps it spin better:)&nbsp;Note: I recommend printing these pieces on a smooth print plate so the bottom of each piece is real smooth and fit together nicely.&nbsp;Plate #1: Radish Top and peg (two colors)Plate #2: Radish Bottom (two colors)&nbsp;If you would like to print a multi-colored radish with less purge waste, you can do the following:For Radish Top add a pause print at layer height 15.0 mm (or layer 75) to change the filament colorFor Radish Bottom add a pause print at layer height 14.0 mm (or layer 70) to change the filament color&nbsp;To assemble: insert the peg into the hole of the Radish Top and then the Radish Bottom connecting the two pieces together. You may also use superglue if necessary to secure the peg in place or the two halves of the radish together.&nbsp;Bouncy Broccoli3D PRINTING SETTINGSLayer Height 0.2mmPLA works great15% Infill&nbsp;Notes: I recommend printing broccoli pieces on a smooth print plate. Also, I turned on the fuzzy skin texture for the broccoli head to give it more texture.&nbsp;Print Plate #1: Broccoli HeadPrint Plate #2: Broccoli Stem&nbsp;Assembly: Insert the top of the stem (spiral portion) into the base of the broccoli head. You can secure with a little superglue if needed:)&nbsp;Corn on the Cob Fidget3D PRINTING SETTINGS:Layer Height 0.2mmPLA works great15% Infill&nbsp;Note: I recommend using a brim on the ‘rod’ piece and using a smooth print plate for all the pieces.&nbsp;Print Plate #1 includes: Corn rows 1-7 and rod (one color)Print Plate #2 includes: Corn husk (one color)&nbsp;To assemble: I placed a number on each row of corn. Place the rod into the hole of Corn Row #7 then slide on corn row #6, then corn row #5, etc. If needed you can a drop of superglue onto each end of the rod before placing it into the hole of row #7 and row #1 to secure it better.&nbsp;Dirt Beds &amp; Planter Boxes3D PRINTING SETTINGS:Layer Height 0.2mmPLA works great15% Infill&nbsp;Print Plate #1: Long Bed of Dirt (one color)Print Plate #2: Long Planter Box (one color)Print Plate #3: Square Bed of Dirt (one color)Print Plate #4: Square Planter Box (one color)&nbsp;<img class="image_resized" style="width: 30.61%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/cc30c650-a5b9-4388-ab23-771346110a1f">I added print profiles for an all corn (long) bed of dirt, an all broccoli (long) bed of dirt and an all radish (long) bed of dirt.  These will all fit into the &#39;Long Planter Box&#39;.&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/8d890950-fa45-4be2-9525-79cba3496680">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/e822000f-9c9a-4e94-a1fc-01cc5e578b63">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing:)

Fidget Garden

Juegos

Control3D

<h4>Matrículas USA </h4>(Atención: El texto de las matrículas se puede personalizar. Las instrucciones para la personalización se encuentran al final de la descripción).<ul><li>Puedes descargar tres modelos de matrícula multicolor de los siguientes estados: Utah, California y New York. </li><li>Puedes imprimir estas matrículas en multicolor con cualquier impresora 3D configurando los cambios de color. Se recomienda utilizar AMS o sistemas multicolor para imprimir la matrícula de UTAH.</li><li>Si quieres crear y diseñar 3D tus propias matrículas multicolor desde cero encontrarás el tutorial de diseño con Fusion 360 en <a target="_blank" href="https://www.youtube.com/channel/UC_i4m-pDROARtY3cmgrJhDA" rel="nofollow noopener">mi canal de Youtube </a></li><li>Material utilizado: <a target="_blank" href="https://control3d.net/tienda-control3d/" rel="nofollow noopener">filamento PLA Básico</a></li></ul>&nbsp;Configuración:Altura de capa: 0.2Aconsejable relleno al 100%&nbsp;<h4>Personalización de textos</h4>Para personalizar los textos de tu matrícula deberás utilizar el laminador OrcaSlicer&nbsp;Pasos para instalar la tipografía en tu ordenador:1. Descarga la fuente para el texto. Puedes utilizar cualquier fuente para personalizar tu matrícula. Yo he utilizado esta <a target="_blank" href="https://fontmeme.com/fuentes/fuente-license-plate-usa/" rel="nofollow noopener">https://fontmeme.com/fuentes/fuente-license-plate-usa/</a> 2. Descomprime el archivo descargado3. Haz clic derecho en la fuente y selecciona ‘Instalar&#39; para todos los usuarios’. Este paso es importante para que la fuente se muestre en Orcaslicer.4. Si Orcaslicer está abierto, ciérralo y reinicia. La fuente debería estar disponible.&nbsp;Personalización de las instrucciones del texto de la placa:1. Abre el archivo de la carpeta ‘Personalizable’ y selecciona &#34;Objetos&#34;.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479419/design/2024-05-30_5ecc19d517414.png"></figure>2. Selecciona la matrícula que deseas imprimir.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479419/design/2024-05-30_632bd9c558363.png"></figure>3. Haz click derecho en el texto que quieres editar y pulsa la opción ‘Editar texto’ <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479419/design/2024-05-30_e167292d54526.png">4. Selecciona la fuente que has instalado previamente y escribe el texto en mayúsculas<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479419/design/2024-05-30_cf12b280be8a6.png"></figure>5. Es posible que sea necesario reposicionar el texto después de realizar cambios. &nbsp;6. Para imprimirlas multicolor con cualquier impresora 3D puedes seguir los pasos de este vídeo: <a target="_blank" href="https://youtu.be/yB_wugh4ojY" rel="nofollow noopener">https://youtu.be/yB_wugh4ojY</a>   DISCLAIMER: para la matrícula de Utah se aconseja encarecidamente que se use AMS &nbsp;&nbsp;¡Abriiiiiiiiiiiiiizos!

Matrículas multicolor | USA Licence plates

Personalizados

HG_Design

Harry potter cauldron lampThe inner hole allows a USB cable to pass through, to be compatible with any light.The top cover can just be put down.Hope you like it&nbsp;

Harry Potter Cauldron Lamp

Merchandising 

nicodeimos

Ring hole: 4.8mm.Model size: 22mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;This model is a unique custom-made version inspired by the work of Marvel Comics and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to contact me for any information on Reddit (<a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">link in my bio</a>).

Superheroes Ironman keychain

Halloween 

Larsvommars

Dies ist ein Teelichthalter in U-Form mit Poops.Vorerst für elektrische Teelichter.&nbsp;Maße: Höhe 17 cm, Breite 17 cm, Tiefe 8 cm&nbsp;&nbsp;

Poop Teelicht Halter

Reciclaje

Gatto

One Piece - Monkey D. Luffy Chibi Figure&nbsp;From the popular manga and anime series, One Piece, comes this adorable chibi figure of the main character, Monkey D. Luffy! Our pirate who knows no fear is 7 cm tall but can be resized to your liking. No print supports are needed with these dimensions, but if you modify them, they may be necessary!  <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428600/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428600/design/2024-06-23_dbf03a232872e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>&nbsp;

Luffy Chibi Figure - ルフィ

Figuras

PS11-Print

Ich habe mir diesen AMS-Stand konstruiert weil meine ganzen Utensilien die ich am Drucker benötige ständig irgendwo rumliegen.Dieser ist komplett zum zusammenstecken und es muss nichts geklebt oder geschraubt werden.Der Zusammenbau ist nahezu selbsterklärend und kann ohne Probleme von jedem durchgeführt werden. &nbsp;Ich habe jetzt zusätzlich einen Druckplattenhalter für 5x Platten konstruiert.Dieser kann ohne Probleme auf den AMS-Stand gesteckt werden und dann das AMS auf den Drucklplattenhalter.Jetzt kann man sich frei wählen ob man den 5-Fach-Halter oder den 3-Fach-Halter nimmt.Oder beide :-)&nbsp;Ich habe als Option einen Druckplattenhalter für 3-Platten konstruiert der je nach Wunsch mit dazu gedruckt werden kann.►Wenn der AMS-Stand ohne Druckplattenhalter verwendet wird benötigen Sie die Pos. 013-TPU-Feed-6x►Wenn der AMS-Stand mit Druckplattenhalter verwendet wird benötigen Sie Pos. 070-Connector-Pin-4x und Pos.080-TPU-Feed-4x►Der Druckplattenhalter wird mit Hilfe der Connector-Pins verbunden. Die Drehrichtung gibt der Pfeil auf dem Pin an.►Für die Schubladen habe ich ein Schild gemacht das individuell beschriftet werden kann ( Bambu-Studio ) ►Diese Schild ist zum einklippsen damit es gewechselt werden kann.►Das Bambu-Logo ist auch nur zum stecken und hält bei mir sehr gut.►in den beiden Seitenteilen und dem Mittelteil ist ein durchgehendes Loch in das Sie je nach Ihren wünschen Filament mit dem Ø1,75mm einschieben können um dem ganzen einen Farbtupfer zu geben :-)►ich habe mich für PLA-Bambu-Green entschieden da mein AMS-Stand auch diese Farbe enthält.►gedruckt habe ich diesen Stand komplett in PLA ►Bambu-PLA-schwarz Basic►Bambu-PLA-weiß Matt►Bambu-PLA-Bambu-green&nbsp;Ich werde in naher Zukunft für die Schubladen noch Einsätze konstruieren für die verschiedenen Bambu-Ersatzteile und diversen Dinge die man so für seinen Drucker hat.&nbsp;

AMS-Stand with optional Buildplateholder 3x or 5x

Bambu

designs.by.Marcum

Never miss a day of medicine or vitamins with this Weekly Pill Box with a Sliding, Locking, Dovetail Lid!&nbsp;Each part of this Pill Box was carefully considered to hold the maximum amount of pills while maintaining a sleek and stylish design. Each indent features a rounded bottom for easy removal of pills.&nbsp;Both the lids and the boxes feature holes to accommodate a 10mm by 3mm magnet to assist with keeping the pill box locked during transit, but can be used without it. The magnet can be press fit into place, but may require glue depending on printer tolerances.&nbsp;Features<ul><li>Sliding dovetail lid, with magnetic locking system</li><li>Several options to suit your needs and style</li><li>Deep indents for pills with rounded bottom for easy removal</li><li>Days of the week marked above each indentation - options for Sunday to Saturday and Monday to Sunday and SIX languages</li><li>Indication arrow on lid to easily show which direction the box opens</li><li>Easy print with carefully considered setting changes to provide best overall quality</li></ul>SizeRegular Box<ul><li>Box - 200mm long x 60mm wide x 24mm tall</li><li>Indents - 24mm long x 40mm wide x 15mm deep</li></ul>Morning / Evening Box<ul><li>Box - 200mm long x 70mm wide x 24mm tall</li><li>Indents - 24mm long x 24mm wide x 15mm deep</li></ul>If you&#39;d like access to a Commercial License and exclusive designs not available anywhere else:<a href="patreon.com/designsbyMarcum" rel="nofollow">Join me on Patreon</a>&nbsp;Check out my latest upload on my profile, <a target="_blank" href="https://makerworld.com/en/models/199263#profileId-219789" rel="nofollow noopener">Dog Kit Cards - Multiple Breeds</a>! Below is a taste of  the different breeds, but there are much, much more!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000171880/design/2024-04-28_e16b2a94f93e9.jpg">&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - Black</li><li>Overture Matte PLA - Jeans Blue</li><li>Overture Matte PLA - Wood</li><li>Overture Matte PLA - Red</li><li>Overture Matte PLA - Light Gray</li><li>Overture Cream PLA - Purple</li><li>Inland PLA - Marble White</li><li>Inland Silk PLA - Gold-Silver</li></ul>

Weekly Pill Box with Sliding Lid - Multiple Styles

Artilugios

Collecticraft

<h2>Insight Unveiled: Abstract Sculpture of Socrates</h2>Experience the essence of enlightenment with "Insight Unveiled," an abstract sculpture that redefines the iconic visage of Socrates. This thought-provoking piece transcends traditional boundaries, offering a captivating exploration of intellect and introspection.<h3>Key Features:</h3>Abstract Interpretation: "Insight Unveiled" presents an abstract interpretation of Socrates' head, ingeniously crafted in three pieces. The transversal cut reveals the philosopher's skull at the core, symbolizing the unveiling of profound wisdom beneath the surface.&nbsp;Dynamic Composition: Through its dynamic composition, the sculpture captures the essence of intellectual revelation. The juxtaposition of forms and materials invites viewers to contemplate the interplay between the visible and the unseen, sparking a journey of introspection and insight.&nbsp;Ethereal Effect: The transversal cut creates an ethereal effect, as if peeling back layers of consciousness to reveal the essence of Socratic thought. This visual metaphor encourages viewers to delve deeper into the complexities of human intellect and perception.&nbsp;Symbolic Significance: "Insight Unveiled" holds symbolic significance as a representation of enlightenment and intellectual exploration. It serves as a reminder of the enduring relevance of Socrates' teachings in the pursuit of truth and knowledge.&nbsp;Abstract Elegance: With its abstract elegance, the sculpture adds a touch of sophistication to any space. Its minimalist design and evocative symbolism make it a striking conversation piece that stimulates the mind and captivates the imagination.<h4>Why Choose "Insight Unveiled":</h4>Intellectual Provocation: Immerse yourself in the timeless wisdom of Socrates, presented in a thought-provoking and visually captivating format.&nbsp;Artistic Expression: Experience the intersection of art and intellect, where abstract forms and symbolic motifs converge to evoke profound philosophical themes.&nbsp;Personal Reflection: Invite introspection and contemplation into your space with a sculpture that inspires deep thought and self-discovery. IMPORTANT: The file uploaded on this model where mesh reduced in bambu studio to allow an esier slice despite the high poly definition. Remember that the joits are loose and used only as a guide purpose between parts, you need to glue them during the assembly.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/558995/2024-02-06_cdd47b9844931.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/558995/2024-02-06_e37756cdbe81f.jpg"></figure>&nbsp;

Insight Unveiled: Abstract Sculpture of Socrates

Deco

JimmiboY - Youtube

Back with version 2 of the storage box system for ikea skadis. as you might have seen my first version that was stackable. this version fits side ways, and are stack able. and they come in diffrent sizes. Look for my other designs.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sCkYCk8ipaI?si=LPSb8c1VUgzuQoWe"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sCkYCk8ipaI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sCkYCk8ipaI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>