Floodbait 117

WANGHENG-♛

&nbsp;The first configuration：countersunk screw3M14mm   104pcs2M10mm   51pcscircumference 540mm width6mm transmissionbelt&nbsp;PETG is recommended for all materialsThe second configurationThe second print configuration is modified specifically for the official screw model, with a triangular shaft for the crankshaft wheelThe needed screws are already adding to the treasure trove3M14mm  103pcs2M10mm  52pcsThe crankshaft pulley is modified to be fixed with 2M screws&nbsp;第一个打印配置适用于螺丝头部直径3M小于等于6mm         2M小于等于4mm的螺丝，一般沉头梅花螺丝就可以第二个打印配置采用拓竹官方螺丝固定，现已经列出到物料清单里，拓竹的内六角螺丝完美适配，质量高。按照A1mini尺寸摆盘，有的需要打印2次&nbsp;  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-07-02_c8e6e8c07dda5.png">&#34;</figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-07-02_919d8d2527056.jpg">&#34;</figure>&nbsp;【FFv8安装视频-哔哩哔哩】 https://b23.tv/fH2lnjc<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_650b33596269a.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_ce67c51351a91.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_4cf38055e154a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_46e6d54cbc465.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_1384995cef1c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_a21fde6e9b729.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_631de67e13b3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_a4d63d5b0c917.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_7bfcc7003e9b6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-07-02_3fb7470138f03.png">&#34;</figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_e9c79cbea83ea.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_32f889dcf8179.png"></figure>&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-15_2eded5b2c31e8.gif"></figure>&nbsp;ll<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_ce8c5639ae2c9.jpg"><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-16_92aa900b9e7ed.jpg"></figure><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_40ae4a966cd04.gif"></figure>

Flaming Fox V8

car stuff 

Superm3

Anyone who travels a lot should have a capsule that contains easy to access medical supplies and emergency items. These items can incule tablets, first aid items, batteries, and much more. This design is a simple screw capsule that is scalable for bigger sizes. Just clip these onto a carabiner and you&#39;re set!&nbsp;Print Settings:<ul><li>0.2 mm layer height</li><li>2 perimeters</li><li>Brim and rafts are optional</li></ul>

Med pack for backpacking

survival 

OVERTURE Filament

We&#39;re know we&#39;re a little late to the airless ball trend, but we love soccer and these airless balls really do work. Try it for yourself!&nbsp;PLEASE READ<ul><li>Download the 50% profile or scale to 100% for full size ball.</li><li>Ball measures 215mm in diameter and uses less than &lt;500g of filament</li><li>Overture TPU can be printed much faster, however slower speeds result in cleaner features and better support removal. Changing the volumetric speed to 2mm^3/s will yield better results.<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498713/design/2024-06-17_b44e0f0007adb.png"></li></ul></li><li>TPU support are very rugged and require some force to remove! Use a pair of pliers or vise grips to remove.</li></ul>Comment if you have questions!- Overture Team&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498713/design/2024-06-26_0e94c034f89a4.gif">&nbsp;

Airless Soccer Ball

airless

Monster

电动摇表器，需要用电磨开孔，安装拓竹玩具套装里的电机就能使用，也可以外接个开关

电动摇表器

watch shit

Faran3D

Assembled and improved SR-71 (or A-12) originally designed by Occupied Brain (credit given below) which has been remixed to print in one piece, as well as the original &#34;tripod&#34; base as well. Genghis was kind enough to create a new “V shape” base which I&#39;ve remixed to give a more contemporary look while retaining most of his aesthetics.&nbsp;These are excellent single color prints for Bambu owners. The bases are extremely easy to print, with no supports or brims required. The SR-71 is printed inverted with supports which will require correct bed adhesion - please wash your texured PEI build plate twice with dish soap and hot water and dry with a clean paper towel if you are having issues.&nbsp;Please print your makes and comments, it&#39;s been amazing to share this with others and we hope you love it as much as we do!&nbsp;If you&#39;d like to buy me a coffee to support this and future projects <a target="_blank" href="https://www.popsession.co.nz/products/buy-faran3d-a-nuka-cola" rel="nofollow noopener">https://www.popsession.co.nz/products/buy-faran3d-a-nuka-cola</a>

Assembled Improved SR-71 Blackbird with 2 Bases

military vehicles

prtomas3D

Replica of 20x110 Hispano bullet in 1:1 scale. I made it as box with srew top. I printed it from silk PLA with 0,12 layer

20x110 Hispano box

bullets

Galactic Armory

Print your own scale model Clone Trooper!&nbsp;&nbsp;This model comes in 2 pre-exported scales - 1:12 and 1:48&nbsp;&nbsp;The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!&nbsp;&nbsp;Find 19 other poses for this figurine with alternate heads on my Patreon:<a target="_blank" href="https://patreon.com/galacticarmory" rel="nofollow noopener"> https://patreon.com/galacticarmory</a>

Clone Trooper Figurine - Heavy

cool figures 

Josh-3D

A set of canister models! I've set these up in 3 basic sizes, with 3 different heights for the larger sizes. Comes in 80mm, 120mm, and 170mm , with variants that are 40mm, 80mm, and 120mm tall. The smallest, 80mm version only comes in a 80mm height.&nbsp;The 80mm and 120mm versions use 8 M4x20mm screws. You can use longer screws, but at a minimum you should use 20mm screws. The 170mm version uses 12 M4x20mm screws!&nbsp;Was looking to do something fun and stylish, and try and push things beyond the basic cylinders. Was a fun project and I hope to incorporate the things I learned from this project into future ones.&nbsp;I highly advise you use fancy filaments for the main body, and please post your prints! I would love to see the color combinations everyone comes up with.&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Canisters

storage

giuliomaffei90

This filament swatch has the same dimensions and shows all different infill patterns&nbsp;The swatch has a slight recess to center a label measuring 12mm x 22mm.The printer i used for the labels is a SUPVAN E10&nbsp;The swatch fits perfectly in any display case, such as this one.<a target="_blank" href="https://makerworld.com/en/models/396842#profileId-298189" rel="nofollow noopener">https://makerworld.com/en/models/254404#profileId-270785</a>&nbsp;als check my regular filament swatch with transparency test and label<a target="_blank" href="https://makerworld.com/en/models/396856#profileId-300785" rel="nofollow noopener">https://makerworld.com/en/models/396856#profileId-300785</a>

Infill Swatch with Label

test prints

CptObvious

Warhammer 40k inspired Chaos marine. Excellent addition to your miniature collection!&nbsp;Original model from <a target="_blank" href="https://www.thingiverse.com/Lost_Heresy" rel="nofollow noopener">Lost_Heresy</a> on thinigiverse: <a target="_blank" href="https://www.thingiverse.com/thing:4970208/files" rel="nofollow noopener">https://www.thingiverse.com/thing:4970208/files</a>&nbsp;

Chaos Marine

warhammer 40k

hako85

Planetary gear spinner miniOuter diameter 55 mm (2.17 inch).Printing takes about 1 hour.

Planetary gear spinner 55mm

fidget toys

waterl0u3d

Remixed - thinner mount version of <a href="https://www.printables.com/model/543563-y-splitter-bambu-lab-inner-position" rel="nofollow">@cv6Channel </a>with 3MF and STL included&nbsp;Materials:<ul><li>3 x PC4-M10 pneumatic connector, inner diameter: 4 mm</li><li>2 x M3 6mm</li></ul>&nbsp;Settings: <ul><li>Support BUILD PLATE ONLY</li><li>Brim-object gap 0.3mm </li></ul>&nbsp;

Bambu Lab Y-Splitter

printer upgrades

PriscoRulez

Introducing the Trolex, a 3D printed working watch powered by a Miyota 2035 Quartz movement. Shock your watch-collector friends with a custom piece that will certainly attract their interest!With its 41.3mm size, this timepiece can adapt to most wrists and for all the occasions provided you use filaments that suit your taste. It is fully working and relatively easy to put together.Create your own personal wristwatch and show the world your style! Now, I also added a custom text version of the dial for your special messages.&nbsp;&nbsp;Important notes: Dial, hands and back case require a 0.2mm nozzle. The other pieces can also be done with 0.4mm nozzle, to allow more filament options (e.g. marble, sparkle, etc.) but would benefit from a 0.2 nozzle for higher quality.&nbsp;To work the watch requires a Miyota 2035 quartz movement, which is easy to find online and fairly cheap, but could be adapted to other movements by creating a custom inner movement holder. I got 5 for 9£ from Aliexpress here: <a target="_blank" href="https://www.aliexpress.com/item/1005006170752556.html" rel="nofollow noopener">https://www.aliexpress.com/item/1005006170752556.html</a>&nbsp;I do not own an AMS, so the watch is designed to be printed without one, for multi-color dial there is a pause set at the start of the 14th layer and change filament. If you do not want to change filament you will have to resume print to finish it, or remove the pause before slicing the plate. &nbsp;There are now two options for the wristband: flexible to be made with TPU (as in the cover picture) and rigid for any other filament.The rigid version is made up of pieces that need spare filament wire to be held together. This allows to adjust size by removing or adding more pieces.&nbsp;Needless to say the hands are the hardest part to get right and might require a few print (I am still working on a more reliable version of these). For reliability I would recommend buying the hands if you actually plan to use this watch as I do not know how long the 3d printed hands will last or keep the time. The second hands was too small even for the 0.2 mm nozzle.&nbsp;I printed it using a smooth PEI plate, I have not tested it yet on other plates, particularly for hands and back cover which have designs on the bottom surface.&nbsp;Building instructions:I am planning to produce a dedicated video on how to build it, in the meantime the Fusion360 scheme shows more or less where each piece should go.<ol><li>Place the movement in the holder, snap the dial in place over it and insert it into the main case;</li><li>Push in place the back case and force the spacer ring over the dial to secure the movement in place, then add the top ring;</li><li>Attach the wristband pieces using spare filament, the holes have a tight fit so it is best to use some pliers to help pushing the filament through;</li><li>Insert the stem on the movement, pull it into time-set position then screw the crown in from outside the case. (Leave enough play to allow the stem to be pushed in into normal position). Use some super glue here to fix the crown on the stem.</li><li>Set the watch into the time-set position;</li><li>Finally use some precision tweezers to push the hands in place carefully. It is not easy and might require some attempts and patience;</li><li>Turn the crown to check the hands are moving correcly and freely;</li><li>Wear it proudly!</li></ol>

Trolex - the 3D printed working wrist watch

watch stuff

Lucky Dragon

<h2>Version 4.0 release：</h2><h2><a target="_blank" href="https://makerworld.com/zh/models/235365#profileId-251626" rel="nofollow noopener">https://makerworld.com/zh/models/235365#profileId-251626</a></h2>&nbsp;<figure class="image"><a href="https://makerworld.com/zh/models/235365#profileId-251626" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-08_286000ad326b4.jpg"></a></figure><h2> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_9df964c378058.png"></figure><figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1BK421b7y9/?buvid=YE4AECEA23D454834A59BE387FA25F470A72&is_story_h5=false&mid=8ogHOG4%2Frfa1BYChwOK0ug%3D%3D&p=1&plat_id=116&share_from=ugc&share_medium=iphone&share_plat=ios&share_session_id=1468377E-5EDC-4356-971B-32326BCD6091&share_source=COPY&share_tag=s_i&spmid=united.player-video-detail.0.0&timestamp=1709474808&unique_k=ltgVCSb&up_id=496314289&share_source=weixin"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1BK421b7y9&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1BK421b7y9&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>【Description】&nbsp;&nbsp;&nbsp;1. This is the third version of the Zhuge crossbow that I have improved. After multiple rounds of printing and modifying the model, it is now officially released.&nbsp;&nbsp;&nbsp;【Features】&nbsp;&nbsp;&nbsp;1. Extra large size and longer range.&nbsp;2. Specially designed for adults.&nbsp;3. Supports up to ten consecutive bows and arrows.&nbsp;&nbsp;&nbsp;【Print】&nbsp;&nbsp;&nbsp;1. Suggest printing with PLA material.&nbsp;2. Open the support.&nbsp;3. Print at normal speed.&nbsp;&nbsp;&nbsp;【Safety Warning】&nbsp;&nbsp;&nbsp;1. Please do not give this toy to minors to play with.&nbsp;2. Please keep the toys out of reach of children.&nbsp;3. Do not shoot at people or animals, be sure to pay attention to safety.&nbsp;4. Please comply with local laws and regulations.&nbsp;&nbsp;&nbsp;【Prepare parts】&nbsp;&nbsp;&nbsp;1. Six M4 * 20 screws.&nbsp;2. Four M4 * 45 screws.&nbsp;3. 10 M4 nuts.&nbsp;4. One nylon rope with a diameter of about 2mm (or other materials used as bowstring).&nbsp;5. 4 rubber bands (can be used to fix the machine head, you can also use other methods to fix it).&nbsp;6. 3D printing model adhesive.&nbsp;&nbsp;&nbsp;【 Frequently Asked Questions 】&nbsp;&nbsp;&nbsp;1. Is the assembly hole too tight to be inserted?&nbsp;&nbsp;&nbsp;Slight hole expansion can be performed on the hole position, or appropriate polishing can be performed on the outer contour of the assembled parts.&nbsp;&nbsp;&nbsp;2. Is the assembly hole too loose and inserted loose?&nbsp;&nbsp;&nbsp;Assembly can be assisted with glue.&nbsp;&nbsp;&nbsp;3. Can't bullets be fired smoothly?&nbsp;&nbsp;&nbsp;Due to the horizontal printing of the bullets and to prevent them from easily falling out of the nose, the gap between the launch pipeline and the bullets is relatively small. The solution is as follows: Use sandpaper to polish the bullets, test while polishing, until the bullets can be fired smoothly (note: do not polish too much, otherwise the bullets will easily slide out of the machine head).&nbsp;&nbsp;&nbsp;4. Is the range of the crossbow too close?&nbsp;&nbsp;&nbsp;Please replace the bowstring material and tighten and shorten the length of the bowstring appropriately.&nbsp;&nbsp;&nbsp;5. Can I play with children?&nbsp;&nbsp;&nbsp;Once again, please do not give toys to minors to avoid personal injury accidents.&nbsp;&nbsp;6. When launching, the nose always tilts up, making it impossible to release the bowstring for launch?&nbsp;As shown in the figure below, you can use 2 rubber bands to bind the machine head and bow arm at the same time, which can effectively solve the problem of tilting the head.&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_57cda4c32bd0c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_448c63cc9c97f.jpg"></figure>&nbsp;&nbsp;【Assembly】&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_fb8e1da2f8417.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_b95aa8f498577.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_0633b3976a2db.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_2cfcd003d27a3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_b1d2f9363b1f9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_756ae9d0891cb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_387547f99a6ab.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_ff9b316509739.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_bdaaaaf4897f4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_4e06c0186ef57.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_c43f446f26ae8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_c974d2869a27b.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_923c913eee028.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_033e60b0ec1d1.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_0b9739352b007.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_afad0f591b131.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_8a2771b68fc1.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_824c5ca5398bf.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_294ac64243de8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_ed71668cef53c.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_89e0d29bb620e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_07173ac70d797.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_00572d1d41047.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_e14f11cc1e0b6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_acc1309bb2f9f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_4e7c3607e4637.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_11af41a39ace6.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/657309/2024-03-03_6efbc19dace7f.gif"></figure>

China zhuge crossbow v3.0 outdoor version（诸葛连弩V3.0户外版）

cool wepons

reciclatecdominicana

Halo 5 - Forerunner Suppressor

halo stuff

Darren

Just a Bitcoin coaster. Printed in Eryone Dark Gold Silk PLA which gave it a wood appearance, also printed in copper and gold, each with a black top graphic surface filament.&nbsp;The 3mf includes the pause at layer 26. Change here from your base filament to the graphic top surface filament. For those who haven't done this “trick” before - when the printer pauses, click “close” on the dialog that the machine presents and then go ahead and unload your base filament and then load your graphic top surface filament and then click “resume”.&nbsp;You can print this using the AMS as well and you can just delete the pause at layer 26 or simply click resume on the printer when it stops. The printer will then swap filaments and continue. &nbsp; If you're using the STL make sure you add a pause at layer 26!&nbsp;PRINT INFO: Printer : X1 Carbon Profile : 0.20mm Standard Material : PLA Brim : NoSupport : No Filament Used : ~25g Print Time : ~42 min Sparse Infill : 15% Infill pattern : Grid&nbsp;Powered by Make My Sign from MakerWorld (https://makerworld.com/makerlab/MakeMySign)

Bitcoin Coaster No AMS Required

bitco8n

Bearded Printer

Upgrade your 3D model collection with our incredible Bone Dragon model from Thangs.com. This well-articulated masterpiece designed by the Bearded Printer features an elegant tail that gracefully extends beyond that of my Water Dragon.&nbsp;Browse through high-resolution images to admire the detailed construction, the intricate joints, and the realism that breathes life into this mythical creature. Inspired by the robust strength and captivating folklore surrounding dragons, this 3D model is ideal for collectors, designers, and 3D printing enthusiasts. Constructed with meticulous precision, the Bone Dragon model showcases a perfect blend of technology and artistry.&nbsp;Apply this innovative design to gaming components, fantasy artwork, and intricate bakery molds. Elevate your 3D design collection by introducing the exemplary Bone Dragon. Discover this impressive, articulated 3D model, and explore the boundless potential of 3D printing with Thangs.com today.&nbsp;As with any print-in-place model, you&#39;ll want to ensure your printer is well calibrated to ensure the bed is level, adhesion is optimal, and flow is tuned.&nbsp;As a new designer I&#39;m always looking for ways to improve my designs, so please let me know your thoughts and I&#39;ll gladly take your feedback into consideration.