flexy2dd

Forest87

The silhouette of a cute cat, scratching the glass of your precious Bambulab 3Dprinter!Attaches directly to one of the two screw heads of the front glass of your X1C or P1S. Optionally, a magnet 10x2mm can be inserted to increase grip.

Cat scratching glass

Deco

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Utils

Kellermann

(Deutsch siehe unten)&nbsp;ATTENTION: No holes for Glass-Top! EPDM-Strip 2mm high required!&nbsp;When looking for a riser for the P1S with an integrated LED, I found a few nice things online, but then decided to create my own.LED orientation downwards, Diffuser made from Layertest strips, use Lego axles as connectors.&nbsp;The riser consists mainly of 8 different elements to print:<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_996e7094a8426.png">What else is needed:&nbsp;16x LEGO® Technic Pin or you can use <a target="_blank" href="https://cults3d.com/en/3d-model/game/lego-technic-pin" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/lego-technic-pin</a>&nbsp;And of course the LED strip, watch out there seems to be a difference between X1 and P1:&nbsp;<a target="_blank" href="https://de.aliexpress.com/item/1005005952550058.html?spm=a2g0o.order_list.order_list_main.17.48155c5fxz4Ci2&gatewayAdapt=glo2deu" rel="nofollow noopener">https://de.aliexpress.com/item/1005005952550058.html?spm=a2g0o.order_list.order_list_main.17.48155c5fxz4Ci2&gatewayAdapt=glo2deu</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_d944f675f44cc.png">&nbsp;If the LEDs in the camera are dazzling or you want a dampening effect, you need:&nbsp;1x First Layer for cutting the diffuser <a target="_blank" href="https://makerworld.com/de/models/17107#profileId-15896" rel="nofollow noopener">https://makerworld.com/de/models/17107#profileId-15896</a>&nbsp;I have cut them to the width of the slot in front of the LED.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_3c2e06076e1f4.png">&nbsp;On Top (between Riser and Glas-Panel) should be a EPDM-Strip 15x2 mm like this one:&nbsp;<a target="_blank" href="https://www.amazon.de/gp/product/B0792H9DJX/ref=ox_sc_act_title_2?smid=AG6DR6G08TPH6&psc=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B0792H9DJX/ref=ox_sc_act_title_2?smid=AG6DR6G08TPH6&psc=1</a>&nbsp;The whole thing is still in the testing phase and will be provided with updates here.I try to implement criticism and suggestions from the community in new versions.It's my first model, hope you like it and enlighten your Bambu. It has already been successfully printed with Bambu PLA with a 0.2 mm layer height with a 0.4 nozzle. Brim 10 mm and wall lines to 4.&nbsp;_______________________________________________________________________________&nbsp;Achtung: Habe Löcher für die Glasplatte vergessen! EPDM-Streifen mit 2mm Höhe verwenden!&nbsp;Auf der Suche nach einem Riser für den P1S mit integrierter LED habe ich zwar ein paar schöne Sachen Online gefunden, mich dann aber doch für eine Eigenkreation entschieden.<ul><li>LED Ausrichtung nach unten</li><li>Diffusor aus Layertest Streifen</li><li>Lego-Achsen als Verbinder nehmen.</li></ul>Der Riser besteht aus 8 unterschiedlichen Elementen, die gedruckt werden müssen.<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_996e7094a8426.png">Was noch benötigt wird:16x LEGO® Technic Pin <a target="_blank" href="https://cults3d.com/en/3d-model/game/lego-technic-pin" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/lego-technic-pin</a> &nbsp;LED Streifen habe ich von AliExpress, da kann man für X1 and P1 welche bestellen:&nbsp;<a target="_blank" href="https://de.aliexpress.com/item/1005005952550058.html?spm=a2g0o.order_list.order_list_main.17.48155c5fxz4Ci2&gatewayAdapt=glo2deu" rel="nofollow noopener">https://de.aliexpress.com/item/1005005952550058.html?spm=a2g0o.order_list.order_list_main.17.48155c5fxz4Ci2&gatewayAdapt=glo2deu</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_d944f675f44cc.png">&nbsp;Falls die LEDs in der Kamera blenden oder man einen Dämpfenden Effekt haben möchte braucht man:&nbsp;1x First Layer zum schneiden der Diffusor <a target="_blank" href="https://makerworld.com/de/models/17107#profileId-15896" rel="nofollow noopener">https://makerworld.com/de/models/17107#profileId-15896</a>&nbsp;DIe Streifen habe ich mir auf die Breite der Öffnung vor der LED zurecht geschnitten.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/156050/2023-11-03_3c2e06076e1f4.png">&nbsp;Zwischen Riser und Glasplatte muss ein 15x2mm EPDM Streifen eingesetzt werden, wie dieser hier:&nbsp;<a target="_blank" href="https://www.amazon.de/gp/product/B0792H9DJX/ref=ox_sc_act_title_2?smid=AG6DR6G08TPH6&th=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B0792H9DJX/ref=ox_sc_act_title_2?smid=AG6DR6G08TPH6&th=1</a>&nbsp;Das ganze befindet sich auch immer noch in der Testphase und wird hier mit Updates versorgt.&nbsp;Kritik und Vorschläge aus der Community versuche ich in neuen Versionen umzusetzen.&nbsp;Ist mein erstes Modell, hoffe es gefällt und erleuchtet euren Bambu.&nbsp;Gedruckt wurde es bereits erfolgreich mit Bambu PLA mit 0,2 mm Layerhöhe mit 0,4er Nozzle.Brim 10 mm und Wandlinien auf 4.&nbsp;

Deco

Utils

Accessoires X1