fjgmjsytvd

Music

Sketchy

<h2>Gravity Phone Holder V2</h2>Introducing the Gravity Phone Holder V2, the next evolution in smartphone mounting technology. Building upon the success of its predecessor, the Gravity Phone Holder V2 offers enhanced features and improved functionality to elevate your mobile experience to new heights!&nbsp;With an upgraded design, the Gravity Phone Holder V2 boasts even smoother operation and greater stability. The gravity-activated mechanism has been fine-tuned for seamless one-handed usage, allowing you to effortlessly mount and dismount your device with precision and ease!&nbsp;<h3>What do I need to assemble it?</h3>You need:<ul><li>1 x rubber band</li><li>4 x M3 bolts ( around 8mm )</li><li>2 x M3 nuts</li></ul>&nbsp;<h3>How do I assemble it?</h3>It is relatively easy to assemble the Gravity Phone Holder V2! Just follow the steps below:&nbsp;Step 1: Insert the bolts into the back of the body.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_37d177278529a.jpg">Step 2: Following step 1, you screw on the mount onto the back of the body (I&#39;ve updated the mount and the vent clip).In the updated version, there is only the ventclip. The clip just needs to be bolted onto the body with 2 M3 bolts and nuts.&nbsp;Step 3: Insert the rubber band and the gears (the rubber band is optional).<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_8b047f7e5a864.jpg">Step 4: Screw on the lid, and you&#39;re done! Now this is optional, but you can lube it up by spraying the middle hole on the lid with some lubricant.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_10d66b1b5f40d.jpg">&nbsp;<h3>Tips and tricks</h3>No support needed for any of it!Maybe put a brim around the gears if you have bad bed adhesion.If using a rubber band, find a size that isn&#39;t too large (loose) or too small (tight).

Gravity Phone Holder V3!!!

daniel

Filament Centered Auto Rotation Foam Blaster Barrel Attachment&nbsp;Should fit regular 16mm barrels (you may need some tape around the barrel if the fit is too loose).Simply thread through your filament of choice and cut the ends off. Designed for 150 FPS Blasters (more to come) &nbsp;

Filament SCAR (FCAR) for NERF Blasters

Nerf

3D Print Masters Hub

Tweezer - Set of 4<ul><li>Great tool to have.</li><li>Robust design</li><li>Good for light general work</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Tweezer - Set of 4

Tools

scott.messina

to be used with :Homey Marvin from Hitchhiker's guide to the galaxy by 2BY2found here: https://www.thingiverse.com/thing:4800888

Marvin the Android's Head(120mm Diameter)

Models

Stag 3D

<h2>The Cable Label</h2>A simple zip tie with space to write and label your cables. When you're trying to locate a cable behind a TV or under a desk it can be difficult to tell which cable leads where. These labels are a simple and effective way of labelling all of your cables so they can be easily identified. <ul><li>Use different colours for different cables</li><li>Quick and easy print</li><li>No supports required</li><li>Minimal filament used</li></ul><h3> </h3>&nbsp;

Cable label zip-ties

Misc

Papadansmaman

This is my Dodecahedron calendar for 2024! One face for each month ! You only need to flip the calendar to the right month! Now you can print each face flat with the color you want. Each plate is easy ton install and remove (They fit perfectly) no glue needed so you can print new plates every year! <img src="https://makerworld.bblmw.com/makerworld/draft/379916/2024-01-09_a73380abb7969.jpg">&nbsp;<h3>*No support needed*</h3>&nbsp;Updates: Update 1: As requested a chinese version is added in the profiles. Update 2 (2024-01-09): As requested I added a plates version to print each face flat with multicolor setting. Update 3(In progress): I want to redo each plate with a different font to make them easier to read and print, I will also add a version Monday starting every week. Please share your creation! :) ***Warning*** Cannot be used to support the weight of a mid-sized SUV (See comments)

Dode-Calendar 2024 (English/Chinese) - No support needed

Office

SH Designs

Ready to launch! Standing at over 10" tall, this fun rocket ship LED lamp is compatible with the <a target="_blank" href="https://us.store.bambulab.com/products/led-lamp-kit-001?skr=yes" rel="nofollow noopener">Bambu LED Lamp kit 001</a>. It also works with a regular or color-changing LED tea light. It prints in about 4 hours for all the parts. A jig is included to help attach the wings and make building quick and easy. Everything was ran with basic PLA at .20 layer hieght. I added a brim to the main body to give it stability and enabled supports for the window, but it would probalby run fine without it. Have fun in 3… 2… 1…

Rocket Ship Lamp

Kids

Gulwer

I am a big fan of flying wings. After I have many in RC format and my little son also wanted something to play with, I made this little G0ider. The Glider is based on the design of the Horten Brothers. Note:The aircraft was designed for small children who cannot yet throw firmly. If the throw is stronger, ore using different type of material Adjustments to center of gravity are necessary.&nbsp;

Flying Wing Glider

Flying

laisch

Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. It mounts to the AMS with just clamping force, so there is no need to make any changes to the original hardware. Never unplug the AMS again when printing from an external spool.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_n6cdbyuzuuve.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_ajymv5zke7nc.gif"></figure>&nbsp;<blockquote>IMPORTANT NOTE: Before you print any part, read the Info part at the end of the build instruction!</blockquote>&nbsp;External Hardware:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_gpinzpf1se9r.jpg"></figure><ul><li>4pc - EXT5.55x25.4 tension springs or as an alternative 4pc small hair rubber band</li><li>4pc - M4x20 screw</li><li>5pc - M4x16 screw</li><li>9pc - M4 hex nut</li><li>9pc - M3 bras heat inserts</li><li>1pc - M3x6 screw</li><li>8pc - M3x4 screw</li><li>4pc - 608 rollerscate bearing</li><li>1pc - ptfe tube</li></ul>&nbsp;Print instructions:All parts print without supports!Everything can be printed in PLA, except the rollers should be printed in TPU. If you have no TPU, I added a PLA version for the part also. You can't just print the TPU part in PLA, because its undersized, and pressing the bearing in it would cause it to fail.&nbsp;Build Instructions:Drill holes After printing the Mainholder, you have to drill out the holes fot the rollers with a 4mm drill to later fit the screws. If the M4 screws fit, you can skip this step. The holes are made exactly 4mm to ensure the slicer makes 5 perimeter for strength. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_wmuhfakemqad.jpg"></figure>&nbsp;Heatinserts The M3x4mm brass inserts have to be placed at the sliding mechanism and on the hole where you want the bowdenswivel to sit later. (The parts are designed for 4mm deep inserts, but it's also possible to use 6mm ones like I did because I had too less 4mm ;) )<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_a60ufmrmawm1.jpg"></figure>&nbsp;Tension Springs:<blockquote>My prefered method is to use the rubber bands, even when the spring solution looks way nicer. But the springs tend to be too strong and overstretching them doesn't make them look nice.</blockquote>For the sliding mechanism you can use either tension springs or rubber bands. When using the springs, make sure that an empty spool will stay in place and don't get pushed out because the spring force is too strong. In case it's too strong you can widen the springs, but if they are too wide, a 140mm spool wont fit anymore.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_afhhdqdtdght.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_mmeizzw31hva.jpg"></figure>Use the M3x4mm screws to screw the springs in place&nbsp;Rubber Bands: Install the rubber bands like the springs. One per slot has enough force to hold the spool.<img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_s1ktst97rhlt.jpg"> Assembling the rollers: Press the bearing into rollerpart 1<img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_lpzxkn799hjr.jpg">Add superglue and slide the two halfes together<img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_8nkfcmbp9t4k.jpg"> <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_k17jdkrkcwv3.jpg"></figure>&nbsp;Installing the rollers: Insert the M4 hex nuts into the back of the Mainholder.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_3bgoc2k932xp.jpg"></figure>Add the Roller and the Spacer and screw them together with the M4x20 screw<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_vh6j1s4i5g84.jpg"></figure>&nbsp;Installing the PTFE Swivel After printing the swivel, make sure that the two parts can rotate. Press the PTFE tube into the swivel and screw it to the Mainholder<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_f2aek2jdswpi.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_xr3j0fuxpsfh.jpg"></figure>&nbsp;AMS Mounting: Connect the clamps with M4x16mm screws and M4 nuts loose to the Mainholder.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_n7cubyc4xkmj.jpg"></figure>Slide the whole assembly to your AMS and tighten the screws<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_1dmqtqzdpmt2.jpg"></figure>When the spoolholder with a full spool installed flexes too much you can also use double sided tape for better adhesion.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-12_vuzqa96gaaqw.jpg"></figure>&nbsp;CONNECTION:For connecting the AMS, the LP-Spoolholder or/and a filament dryer you can use my <a target="_blank" href="https://makerworld.com/en/models/74010" rel="nofollow noopener">3-Way Bowden Splitte</a>r:&nbsp;<figure class="image"><a href="https://makerworld.com/en/models/74010" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-11-25_580b350a182a5.jpg"></a></figure>&nbsp;AMS RISERIf you want to use the LPSH with an AMS - Riser, I recommend to check out the<a target="_blank" href="https://makerworld.com/en/models/86200" rel="nofollow noopener"> Mooser Project</a> by <a target="_blank" href="https://makerworld.com/en/u/2178842856" rel="nofollow noopener">Basti85</a>. It was designed to be fully compatible with the LPSH. His risers has already included the throughholes for the LPSH - Spoolholder. &nbsp;<figure class="image"><a href="https://makerworld.com/en/models/86200" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/334717/2023-12-09_9418658cdf1eb8.jpg"></a></figure>&nbsp;&nbsp;&nbsp;IMPORTANT INFO PART<blockquote>TIP: If the rollerslides are jamming from time to time, you can add some lubrication to the slider. I used the same silicon lube wich I use for the lead screws AMS: There seems to be different versions of the AMS. So before you print the clamps, check the rib size of your AMS. If you have 4 Ribs wich are 65mm - 86mm - 65mm appart, you can print the clamps like they are in the print profile. If you have 6 ribs wich are about 45 - 43mm appart you have to just print the "Clamp_small_18mm" at least 3 times Clearance Issue One user encountered too much clearance on his sliders wich leads to too much sagging of the spool. So I added three clearance test prints. The original "Mainholder" part comes with clearance 0.2mm. So print out the three clearance prints first and then decide wich "Mainholder" - version you want to print. For the sliders to work perfektly they must slide with ease (lube if necessary) but should not have too much wobble. Heat Inserts: There are 2 Types of M3 heat inserts. The one I used originally have ~5mm in diameter. If you are using the ones with 4mm outer diameter, there is a file called “holefix _4mm.stl" wich you can load together with the Mainholder.stl into the slicer. Just mark both files, pull them to your slicer and say "yes" when Bambu studio is asking if you want to load it as a single object. For those who want to go anyway with the rubber bands I added a "rubberplug" - part wich can be used instead of the heat inserts. There are also two versions, one for the original 5mm holes and one for the holes with the holefix for 4mm.&nbsp;Tension springs vs. rubber band My prefered method is to use the rubber bands, even when the spring solution looks way nicer. But the springs tend to be too strong and overstretching them doesn't make them look nice. UPDATE 21.11.23: - made the bowdenswivel stronger and added two different sizes 20mm and 30mm&nbsp;Update 31.12.23: - Holefix_4mm.stl for 4mm diameter heat inserts</blockquote>&nbsp;

LPSH - Low Profile Spoolholder (sidemounted for AMS)

Printer

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place Double Storage Customizable Divider Parts BoxNot just for Bambu Lab parts! Makes a great jewelry box, too!&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45645#profileId-47422" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-28_e2af4207409738.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45645#profileId-47422" rel="nofollow noopener">Customizable Dividers</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>Flip Top Lid:<ul><li>Allows for double the storage! The Flip Top prints on a separate plate and is super easy to install. When the Flip Top snaps closed it sits tight to the top dividers so even the tiniest screws won't fall out or move to another compartment! In short, your parts STAY where you put them!</li></ul>&nbsp;Flip Top Installation:<figure class="table" style="float:left;width:50%;"><table style="border:2px solid hsl(0, 0%, 100%);"><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-31_5a34a1d06579c.gif"></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"> </td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Flip Top Storage Box

Containers

Kit Crafters

By popular demand, here is a Model Kit for the IndyCar 2023 car!&nbsp;Just like the Formula 1 car, this model kit is incredibly easy to print, doesn't need supports, and is a blast to assemble.&nbsp;Try printing some out as fun little gifts or as a challenge to yourself!

IndyCar 2023 - Model Kit

Toys

KENPRINT

*** edit *** this model has now been superceded by a better version link just below - works way better and cant fall off the tubehttps://makerworld.com/en/models/72083#profileId-76216&nbsp;A quick and simple tool to help when trying to remove the PTFE tube from the AMS buffer &nbsp;It slips onto the tube and just push it towards the buffer to release the tube and pull back to remove

AMS buffer PTFE release v1 - now superseded - link to v2 in description

AndreoBTW

Update 15/11/2023:Added setup 50%, 100% and 150% size with better connectors tollereances&nbsp;Remixed from <a target="_blank" href="https://www.thingiverse.com/thing:3432933" rel="nofollow noopener">Death Star scaled one in two million by tato_713 - Thingiverse</a>Best print adhesion Added connectors to print in two parts and better results&nbsp;&nbsp;

Death Star - Star Wars Remix for BambuStudio + Connectors - SupportFree

Sci-Fi

Not Punny Labs

A spiralized christams tree light for use with an LED tea light.

Spiral Winter Tree LED Tea Light

Christmas

Big Plate Chicken

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/EF0wKgbhywc?si=mggXdYYncWT3ia03"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=EF0wKgbhywc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/EF0wKgbhywc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Can you imagine? We made 7 adjustments and optimizations for this model, spending nearly a week on the optimization! Now, it's finally without major issues! This 3D printed model design, we named it the Radish Cannon! It can not only launch projectiles, but it also doesn't require supports and is a one-piece print. If you have the AMS multi-color system, that's even better, as it can be printed in multiple colors in one go, making it look more attractive! Welcome to download and print~ It requires a 0% infill rate, with the wall thickness set to 0.8mm! If you like this design, please click the 'like' heart button to show your appreciation and support!,please follow us on Twitter: <a target="_blank" href="https://twitter.com/BPCSbpcs" rel="nofollow noopener">https://twitter.com/BPCSbpcs</a> Feel free to contact us if you have any questions.