finnwii3d

work

Print Design

This heart-shaped box is a symbol of love and devotion. The eternal rose, in the shape of a heart, represents a love that transcends time. It is a gift that symbolizes eternal affection and sincere affection. Place this box in your room, on the nightstand or in any special place. Its heart shape provides a romantic and delicate touch.

Heart of Eternal Roses

moms day

Generic User

Bambu Labs 4-in-1 popular hub is a great junction for all filament feeds. It has a unique mounting point which I have fitted to my Mount. Great care has been taken to ensure the angles are correct so there is little to no deflection of the filament through the pathway as it enters the Printer. It is an easy install which allows you to remove the top coupling. Two m3x16 screws attach the Mounting to the Back panel and one M4x12 to fit the 4-in-1. Ensure your PTFE are cut square and fresh for the installation to avoid any catching points. ** This tool will come in handy for working with the PTFE.<a target="_blank" href="https://makerworld.com/en/models/173932#profileId-230634" rel="nofollow noopener">https://makerworld.com/en/models/173932#profileId-230634</a><figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000210875/design/2024-02-28_d7786e6c87129.jpeg"><figcaption>PTFE Tri-Tool</figcaption></figure>&nbsp; **Alternative fitment for 4-in-1<a target="_blank" href="https://makerworld.com/en/models/212566#profileId-232227" rel="nofollow noopener">https://makerworld.com/en/models/212566#profileId-232227</a><figure class="image image_resized" style="width:50.02%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000210875/design/2024-03-01_5c7e11155608a.jpeg"><figcaption>4-in-1 FIlament Hub Buffer Plate</figcaption></figure>&nbsp;

4-in-1 Filament Hub Top Mount for X1/P1

Mods

TKB-3D

Windowed AMS Silica Box to see if you need to dry your beadsEasy to fill with the screw on Funnel included in the design&nbsp;-----THE ORIGINAL PRINT PROFILE HAS BEEN THOROUGHLY TESTED WITH MANY FILAMENT BRANDS. IT HAS CUSTOM FIRST LAYER AND OTHER CUSTOM PRINT SETTINGS. I DONT NOT RECCOMEND USING ANY OTHER PRINT PROFILES. ----&nbsp;requires 1.5inch round 1/8 inch thick acrylic disc.  (38mm x 3mm for the metric people)you can buy them here<a target="_blank" href="https://www.amazon.com/dp/B09MFNLKWT?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B09MFNLKWT?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;

AMS Windowed Silica Box

Jaxel

Inserts for Splendor. Fits TWO editions of Splendor, the base game, and an expansion. In the pictures, I am using Marvel's Splendor. Fit's in the base game's box.&nbsp;The models have been slightly altered since I took the pictures. I added some holes to make it easier to pick the pieces up and out of the box.&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

Splendor Game Box Insert

Games

SavageLau

<h3>If you want a commercial license, check out my bio and get it from Patreon.</h3><h3>If you like to support my work, so there will be more design like this in the future open to you:</h3><h2>My <a target="_blank" href="https://www.patreon.com/SavageLau" rel="nofollow noopener">Patreon</a></h2> <a target="_blank" href="https://www.buymeacoffee.com/SavageLau" rel="nofollow noopener">Buy me a coffee</a>&nbsp;&nbsp;&nbsp;Hey guys, I'm here to introduce you another rose saber. This design is requested by many, they want to have flower and saber separate. So, there you go.&nbsp;Made a lot of changes compare to last rose wand. So I made this as another upload instead of making changes on old one, it will also help me to easier to maintenance update in later day. I may design some more rose attachment for this design, maybe, how knows.&nbsp;&nbsp;In tnew rose saber takes less than 3h to print, total around 50g filaments. Inline with other saber design.&nbsp;Now you can print saber part separate with the rose part. No color change required. I have currently upload two saber and two rose deisng there. They are interchangeable, you can pick any one you like.<h4> </h4><h3>There are two sizes available, pay attention when you selecting the printing profile.  </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/499865/2024-02-04_6083551578095.png"></figure>You may like my other Wand design: Dragon wand:<a target="_blank" href="https://makerworld.com/en/models/135043#profileId-146518" rel="nofollow noopener">https://makerworld.com/en/models/135043#profileId-146518</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/499865/2024-02-04_ca421d7f79dbc.jpg"></figure>Loong wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/499865/2024-02-04_2b243d7e1e7de.jpg"></figure><h2>Post work instruction:</h2>Remove brim. (It's in GIF format, handy app might not show) Flower bud only have outter brim.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/499865/2024-02-04_021622969b59d.gif"></figure>&nbsp;<h2>Installation instruction:</h2>Place your saber and flower on the flat surface, gently apply force down vertically. Force apply on side may shear the joints! Be careful.Joint is designed not able to disassembly again, force to disassembly may cause part failure.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/499865/2024-02-04_dc8252d1d2d0e.gif"></figure>&nbsp;&nbsp;&nbsp;&nbsp;

Rose Saber Collection (Collapsible)

Swords

Fyrby Additive

V-Spooler Mini

Spool Winder

jwalker55

A vase with twisting pilars that merge together. Looks especially neat with dual color silk filaments. 160mm tall&nbsp;2 versions are included, a filled version for spiral/vase mode printing, and a version with the internal cavity modeled in case you want to try to make it water tight. Included profile is for vase mode only.

Twisting Pillars Vase

vase

mcmaven

<h2>Summary</h2>This is my second clockwork design. It took just under a month from starting the design, to posting it. I modeled it after a Cabestan Triple Axis Tourbillon, which they offer in their high-end watches, and spent many hours looking at Youtube videos of the watch.Similar to the Gyrotourbillon, I tried to make the model an accurate (scaled up) version of the original Cabestan mechanism. I printed the screws to scale, then stuck a 2mm screw in their centers to hold it together. I also included Incabloc shock absorbers by printing clear red 'jewels', and working snap rings to hold them in place.This model is small, about 140mm in diameter. I power it with a 2 Amp USB power supply. Here a real-time video. <a target="_blank" href="https://youtu.be/Imm3mrR06tc" rel="nofollow noopener">https://youtu.be/Imm3mrR06tc</a> This designed moved so fast that a timelapse of it was just a blur. To keep more up to date with what I'm doing I have an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. I posted the pulley versions of the L3 Inner Bearing Race (L3 Inner Bearing Race 2a,STL and L3 Inner Bearing Race 2b.STL) and the Stepper Pinion.STL file.Apparently I had the L3 Inner Bearing Race STLs for the gear driven design, and the Stepper Pulley.STL for the rubber band driven design.In my original design, the L3 assembly was gear driven, which is still illustrated in the notes. Gear drive worked fine for the Gyrotourbillon design, but I was having lots of problems finding the correct stepper speed for this Triple design. Too fast and the whole thing would bind up, and too slow, it would intermittently stop. A friend suggested using a rubber band, which led to the version that you see in the video.I would recommend using the Pulley/rubber band approach. That is, print the L3 Inner Bearing Race 2a.STL, L3 Inner Bearing Race 2b.STL, Pulley Brigde.STL, and Stepper Pulley.STL files.However, the L3 Inner Bearing Race a.STL, L3 Inner Bearing Race b.STL, and Stepper Pinion.STL files are included if you want to experiment with a gear driven design.My argument being that the rubber bands provide two benefits. 1) The stepper can be set at a slightly higher speed than necessary, and the rubber bands will slip on the pulley if it is not the perfect speed for the movement, and 2) the rubber bands provide a constant tension, which works well with a movement that periodically locks its position while the balance wheel swings back and forth. If you turn the L3 turntable manually, you can feel the intermittent motion that gets transmitted to it by the escape wheel movement. The rubber bands stretch while the L3 rotation is locked, and contract when the escape wheel turns. Basically acting like a weight would, in weight driven design.Both drive versions are now included if you want to experiment with a gear driven design. I was concerned that using supports would make the bearing race too rough, so the L3 Ring Gear is printed as two parts (a and b), then glued together so you don't have to use supports.&nbsp;Read the Triple Axis Tourbillon Build Notes PDF in the files for more information.Enjoy, McMaven<h2>Print Settings</h2>Printer Brand: PrusaPrinter: <a target="_blank" href="http://amzn.to/2rqZ6Uo" rel="nofollow noopener">i3 MK3</a>Rafts: NoSupports: YesResolution: 1.5mmInfill: 20%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA" rel="nofollow noopener">Hatchbox PLA </a>Transparent Red, Black, Gold, Silver

Triple Axis Tourbillon

projects

Army of Won

My kids are a big fan of Spider-man, so in keeping with the holiday giving spirit, I'm giving away the one, the only, Spidey Santa! Switch out the colors and make it your own.This toy is designed to be 100% printed with no supports or brims. Go forth and make something EXCELLENT!This toy is offered free for personal use only, however, if you wish to sell printed versions please join our Patreon community to obtain a commercial license: <a target="_blank" href="https://www.patreon.com/armyofwonstudio/membership" rel="nofollow noopener">https://www.patreon.com/armyofwonstudio/membership</a>.

Spidey Santa print-in-place toy

Flexy

3dprinting4silvas

Flexi Tie V1<a target="_blank" href="https://makerworld.com/en/models/19550#profileId-18273" rel="nofollow noopener">https://makerworld.com/en/models/19550#profileId-18273</a>&nbsp;Flexi tie V2********************************************************************************************Update: 12/10/2023 loaded pre-assembled filed under the Pre-made folder. just click the segments together and you are done. to customize the patterns print from Build your own folder. *********************************************************************************************&nbsp;I wear ties a lot. This Tie doubles as a fidget toy which is super cool during boring meetings.&nbsp;The tie is totally adjustable to any length you need, as well as customizable for various patterns due to the snap connection style of the pieces. It is also the closest thing to a fabric tie that I have seen out there for 3d printed ties.&nbsp;There is no need for a rope or elastic as the knot of the tie slips on over the top of the top button of your dress shirt.&nbsp;the profile is set for a 23 inch tie from the top of the knot to the bottom of the tie. (my size)to adjust the length simple take parts out the each of the segments or remove a segment completely&nbsp;Please note some assembly is required. see the Assembly section below (read before printing).&nbsp;Here is what you will need to print (in order):Please use fresh glue on the build plate this is a very detailed print!1st plate:1x Fabric 12x12?x Fabric 4x4 (as many as you need to complete the length of the tie you need. I used 5)&nbsp;2nd plate:1X Knot1x Knot connection?x Side_link and Side_link2 (Each segment of the tie can be up to 8 rows long. Side link and Side link2 are to be used on opposite sides. Note which direction of the connectors)1x Step_up_links (these match are the 9th and 1st link providing a smooth step up to the next row.)1X Tie_End (you may need to remove links to make this fit to your tie)&nbsp;Assembly:Once you printed all the needed files, you can assemble "Fabric 12x12" and "Fabric 4x4" into the segments. Keep all the “Side_Link" and “Side_Link2” stuck to the plate until you need them. Only pull off the "Side_link” pieces you need as you need them, so that you can keep them in order. The number of segments you will use depends on the length of tie that you would like to have in the end. You don't have to use a full segment, just play with the “Side_Link” and "Side_Link2” to make the transition between segments as smooth as possible.A segment is 10 full rows connected by 9 sub rows. Each segment is increased by +1 column. Also make a Tie end by making a triangle starting with a row of 6 and working down to a single piece (see the image below). The triangle size will vary based on the number of full segments that you use up to 3 full segments.the first segment is 3 columns connected to the “Knot_connection”. the second segment is 4 columns. The 3rd segment is 5 columns as seen below: <img src="https://makerworld.bblmw.com/makerworld/draft/256177/2023-11-21_9266e271a3f44.jpg">&nbsp;One by one add the “Side_link” and "Side_Link2" pieces on opposing sides of the segments starting from the smallest between the first and second rows of the segment, continue on down the column in order of size. This should give the segment a tapered look. Note that there isnt a “Side_Link” between row 9 and 10 for each segment. This will be added at a later step. Also add the “Tie_End” piece to the triangle you created. If you are only going to use two segments note that you will need to remove two opposing pieces within the “Tie_End”. You cant remove the ends it has to be one of the middle pieces.Example: <img src="https://makerworld.bblmw.com/makerworld/draft/256177/2023-11-21_3b8554c284e34.jpg">You can now attach the segments to each other. Segment 1 will connect to segment 2. Segment 2 will connect to segment 3. Segment 3 will connect to the triangle or Tie end.Example:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/256177/2023-11-21_f8678523634c9.jpg"></figure>Next add the “Step_up_links” to row 9 and 10 of each of the segments. This should complete the tie other than the knot.Example: <img src="https://makerworld.bblmw.com/makerworld/draft/256177/2023-11-21_0582939fc74ef.jpg">Remove the supports from the Knot and clean up the edges with a xacto knife. Cut a piece of filament about 30mm in length. Attach the "Knot" to the "Knot_Connection" by pushing the filament through the holes after aligning the two as below. Trim off the excess filament. <img src="https://makerworld.bblmw.com/makerworld/draft/256177/2023-11-21_4f13194afd269.jpg">

Flexi Tie V2

church

Tactical Kaoz

🎁✨ Discover the charm of our 3D printable gift boxes, each featuring a cozy knitted pattern that adds a heartfelt touch to your presents. 🧶 These boxes are a work of art with their detailed textures and vibrant ribbon accents, perfect for making any gift extra special. 🎨 Whether for a birthday, holiday, or &#39;just because,&#39; these boxes transform gift-giving into a memorable experience. 🌈 Ready to be downloaded, printed, and assembled, they&#39;re your go-to for a personal and creative touch🎁Become a Patreon member for access to all of my current month&#39;s files 😁 Continue enjoying this perk for as long as you are subscribed along with a generous 50% discount on all previous months&#39; files, plus the commercial rights to start selling your creations of my designs immediately .Become a member for access to all of my designs 😁 Continue enjoying this perk for as long as you are subscribed, plus the commercial rights to start selling your creations of my designs immediately: <a target="_blank" href="https://linktr.ee/tacticalkaoz" rel="nofollow noopener">https://linktr.ee/tacticalkaoz</a>-PARTS REQUIRE GLUE TO BE ASSEMBLED&nbsp;&nbsp;

MULTICOLOR CHRISTMAS CROCHET GIFT BOX

Christmas 

austinvojta

A ball trapped inside a cube. 20mm, 40mm, and 60mm variants.Optimized for easy 3D printing, with chamfers on the bottom edges of the ball and cube to facilitate a good first layer.Designed parametrically in Fusion 360, so let me know if there are other sizes you'd like and I can easily provide them!

Ball in Cube

calibration 

zn0uz4_cz

Simple bag clip, as I found others as a quite big. Printed from PLA or PETG, doesn't matter.

Bag clip

Tools

Halloween 

mltriebe

I designed this sign with a .02 nozzle for the detail in the lettering. There is a spot on the back for a 12mmx2mm magnet if you want to use one and one that does not have one. I used Hatchbox white and Bambu red for the filaments.

Let Me Stop

Signs

3D design shop

This is a flexible, Baby dragon It prints in place with no supports.with a flexible head, arms,legs,body and tail!&nbsp;assembly is the wing but is just click on,&nbsp;&nbsp;Otherwise try to check the new version of the same dragon <a target="_blank" href="https://makerworld.com/en/models/81584#profileId-86859" rel="nofollow noopener">https://makerworld.com/en/models/81584#profileId-86859</a>&nbsp;&nbsp;enjoy .

Flexi Baby dragon- multi color

Dragons

fay3dlab

So i've been wanting to design for a simple toy that i can give away to my nephews and nieces during our family holiday.. The toy has to be simple to 3d print and easy for the kids to assemble.. And that will entertain them for while.. And it needs to be 3d printed cheap since i have a lot of nieces and nephews..So i came out with the idea of a catapult that has to be assembled and all the parts will be laid out kinda flat and connected together like those gundam figurines that you have to assemble.. The assemble will be fairly simple following the instructions given..And you can pretty much catapult anything small.. but to keep it save for the children to play.. i'm gonna use the foam rubber nerf balls as boulder for the catapult.. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=5f7FVSOeHJo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/5f7FVSOeHJo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Mini Catapult kit card

AHA-3D

为了更好的体验我会保持更新，所以请注意更新时间以免使用了早期的文件I will keep updating for a better experience, so please pay attention to update times to avoid using earlier files&nbsp;&nbsp;嗨，好久不见！我看见了你们的反馈，有许多朋友出现了问题，所以我对许多细节进行了修改并更新了模型，希望这次能让你们收获更好的表现！ Hi, long time no see! I have seen your feedback, many friends have problems, so I have modified many details and updated the model, hoping to make you better this time! 改进了转轴以及增加了垫片使运行更加顺畅，你也可以使用一些其他的方式来提高润滑，可以有效的改善飞行。Improvements to the shaft and the addition of gaskets to make the operation smoother, you can also use some other ways to improve lubrication, can effectively improve the flight.<figure class="image image_resized" style="width:20.88%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_8d13870759401.png"></figure><figure class="image image_resized" style="width:20.93%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_aa10792ab6f66.png"></figure> 拓宽了间距，可以减少与皮筋间的摩擦同时也减轻了一部分重量。The widening of the spacing can reduce friction with the rubber band and also reduce some weight.  <figure class="image image_resized" style="width:21.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_c8e7eebd2f8db.png"></figure>以及其他一些细节上的改动 Some other detail changes<figure class="image image_resized" style="width:20.99%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_5fd669f002cf4.png"></figure><figure class="image image_resized" style="width:21.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_c4b890bbcbb59.png"></figure> 扇叶同样进行了许多测试，替换了更轻巧的，不过实际的影响有限（所以我仍然很喜欢原先的设计因为确实看起来非常的lovely）。 The fan blades also underwent a lot of testing and were replaced with lighter ones, but the practical impact was limited (so I still like the original design because it does look lovely).<figure class="image image_resized" style="width:25.19%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_641df49991178.jpg"></figure> 一些小贴士：Some tips:制作扇叶角度时建议这样加热后扭转而不是弯折，这样扇叶更加结实。When making the Angle of the fan blade, it is recommended to twist it after heating rather than bending it, so that the fan blade is more solid.<figure class="image image_resized" style="width:20%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_d61b784343a2.jpg"></figure>（弯折容易损伤扇叶）（The fan blade is easily damaged by bending） <figure class="image image_resized" style="width:20.19%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-02-29_cc4fa9567435c.jpg"></figure><figure class="image image_resized" style="width:20.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-03-01_63d87f0ae4605.jpg"></figure>（短暂加热然后扭转）（Heat briefly and then twist） 最后，仅仅一根皮筋所能提供的动力终究是有限的，这款模型的飞行距离大约为3-4米（足够我完成一些恶作剧，那也是我最初设计的想法）。In the end, there&#39;s only so much power you can get from a single rubber band, and this model has a range of about 3-4 meters (enough for me to pull off some pranks, which is what I originally designed it for). 所以如果想要继续提升飞行显然就需要考虑提升动力，所以这是接下来的计划：So if you want to continue to improve the flight obviously need to think about increasing the power, so this is the next plan:<figure class="image image_resized" style="width:42.01%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-03-01_9ae01cc2764ed.jpg"></figure>敬请期待吧！Stay tuned! ▲<figure class="image image_resized" style="width:36.4%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2024-04-25_33c4fdb49757d.gif"></figure> ↑↑↑update-24.2.29↑↑↑ <figure class="image image_resized" style="width:17.17%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000076493/design/2023-11-28_3910c013f96fd.gif"></figure>

舞蝶-love fly

Valentines

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;