fieznur

AU3D

Parametric Skadis board generators are commonly available, but they typically require the installation of CAD software and a fundamental understanding of how to use it. Fortunately, for those who prefer not to engage with CAD, I have good news. Presenting 99 different designs of IKEA Skadis pegboards, these variants all fit on the build plate of your A1, P1P, P1S, and X1. To enhance user convenience, I&#39;ve organized the files based on the number of columns, creating separate print profiles for each. This categorization allows for more straightforward and intuitive navigation.&nbsp;<h3>Wall Mounting</h3>You can use my <a target="_blank" href="https://makerworld.com/en/models/420877" rel="nofollow noopener">IKEA Skadis Wall Mount</a> set, designed for seamless mounting of the board to a wall or any wooden surface. This set accommodates M4 screws and comes in two distinct sizes for your convenience: 10mm and 20mm. Opt for the 20mm variant to ensure compatibility with the Skadis board&#39;s original mounting mechanism, although it&#39;s worth noting that this much space isn&#39;t necessary. For most installations, a pair of screws at the top suffices, but you have the option to secure all four corners for added stability. Alternatively, consider employing <a target="_blank" href="https://makerworld.com/en/models/421676" rel="nofollow noopener">Screwless Support Feet</a> designed for the lower half of the board.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>

IKEA Skadis

Ikea

Neebick

This is my take on a Steam Deck Stand. The groove on the base is cut to perfectly hold the steam. The steam deck slides in smoothly and self corrects to center.&nbsp;I have included lettering and the logo for multi material printing.

Steam Deck Stand with easy to seat groove

Steamdeck

mellda

<div><h1>Summary</h1><div>Second and final version. I refined the holder angle to be accurate.The full manual how to install the camera to Mazda 3 (BM, BN) is here <a href="https://www.youtube.com/watch?v=2eUkfT9wczM" rel="nofollow">https://www.youtube.com/watch?v=2eUkfT9wczM</a></div><h1>Print Settings</h1>Printer Brand: <div>Prusa</div> <pre><code> Printer: <div>i3 MK3</div></code></pre> Rafts: <div>Doesn't Matter</div> <pre><code> Supports: <div>Yes</div></code></pre> Notes: <div>You need to choose the right orientation because there are two clips which need to be a bit flexible.</div></div>

Mazda 3 holder for Mazda 6 camera

Mazda 

Dub1ns

This is a 3D printable keychain that features the Hello Kitty. It is designed to be easy and fast to print. Can be printed with any filament material. Whether you are a fan of Hello Kitty or just need a nice keychain, this is a great choice. AMS not needed! You can also colour change on height for better appearance and prominence of the font Size: 45x63mn

Hello Kitty keychain

Kitty

CK Designs

This is an updated version of my “Locking Wall Mount For Milwaukee Packout”. I took inspiration from Sean&amp;Lucia&#39;s Packout mount on Printables (https://www.printables.com/model/357256) but completely rebuilt it using my easy alignment method.&nbsp;This new version can fit a plate that holds all 6 feet compared to only 4 before. It also uses less material, no supports, and prints faster (I also think it looks a lot nicer than my last design) I also included a removeable locking tab in case you need to make sure your box won&#39;t fall out of the mount. This mount does hold the boxes fairly snug without the locking tab though as you can see in the last picture where the box is upside down. The mounting holes were designed for regular drywall screw, but you may be able to use other screws as well.&nbsp;Please note that the licensing doesn&#39;t allow for my file or prints of the file to be sold

Packout Mounting Plate V2

Packout

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

Cool Things 

PhabulousPhantom

The F-15E Strike Eagle, designed by Mcdonnell Douglas, is a multirole strike fighter derived from the F-15 Eagle. it was made to carry out strikes (who could have guessed) deep in enemy territory without fighter escort.Both Sprue and Sprue-less models included along with models of individual parts. while the fit is relatively snug, glue is recommended.Print at a .2 mm layer height with 100% infill.<h3>Print Settings</h3>Rafts: Doesn't MatterSupports:NoResolution: .2Infill:100%Filament:Overture PLA Gray&nbsp;&nbsp;Category: Hobby

F-15E Strike Eagle Kit Card

Kit Card

gasolioblues

Guancette molto semplici per coltello Civivi Elementum.Le immagini si riferiscono ad un pezzo stampato in PLA ma forse sarebbe più opportuno in PETG :-) Nell'immagine pezzi stampati in PLA arcobaleno metallico ESUN / Nozzle 0.4 / Spessore layer 0.2&nbsp;Very simple scales for Civivi Elementum knife.The images refer to a piece printed in PLA but perhaps it would be more appropriate in PETG :-) In the image pieces printed in ESUN metallic rainbow PLA / Nozzle 0.4 / Layer thickness 0.2