ferzbeidel

Michele MM3D

hole in the wall hueforged&nbsp;Here you can find all my HueForge creations, <a target="_blank" href="https://makerworld.com/en/@MicheleMM3D/collections/503504" rel="nofollow noopener">https://makerworld.com/en/@MicheleMM3D/collections/503504</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Beige At layer #14 (1.2mm) swap to Jade White At layer #24 (2mm) swap to Yellow for the rest.

hole in the wall hueforge

Deko

Visitenkarte

2D Art

More exclusive Designs and Commercial Licenses: <a target="_blank" href="https://www.patreon.com/2darts" rel="nofollow noopener">https://www.patreon.com/2darts</a>&nbsp;Stackable Beer Crates / Battery Holder for<ul><li>AA Batteries</li><li>AAA Batteries</li><li>9V Batteries</li><li>CR2025 Batteries</li><li>CR2032 Batteries</li><li>Empty Box (Customizable with Names)</li></ul>I would really appreciate it if you could rate my Designs! :)&nbsp;Follow for Professional and Free Designs!

Stackable Beer Crates AA  AAA  9V  CR2025  CR2032

Haushalt

Madtrap

<h2>Corner trim for kids</h2><figure class="image image_resized image-style-side" style="width:45.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/738420/2023-11-16_93caa4788a315.gif"></figure>These corner trims fits on door frames or furnitures.There are 10 different models in this pack.<ul><li>Dinosaurs</li><li>Teddybear</li><li>Construction site</li><li>Pirates</li><li>Space</li><li>Gaming</li><li>Farm</li><li>Fairy</li><li>Unicorn</li><li>Princess</li></ul>Happy printing!&nbsp;Me and my brother spend time on this for our own enjoyment and just want to share our work with the community.If you like any of our models we would appreciate a comment or upvote on the model you like. Also, always feel free to contact us if you have any suggestions for new or current models. If you want to buy us a coffee or support our work you can use <a target="_blank" href="https://paypal.me/madtrap" rel="nofollow noopener">Paypal</a> or <a target="_blank" href="https://cults3d.com/en/3d-model/home/corner-art-pack-for-kids-room" rel="nofollow noopener">buy the model</a> on cults3d

Corner Trim Pack for kids room

Kids 

Fugge84

Hallo Comunity&nbsp;&nbsp;Hier ein Bosch 18V AkkuHalter ( Modular ) für Bosch KofferUnendlich erweiterbar zur sicheren verstauung in einem Koffer.Das modul hat Klebenuten im unterem bereich so das man es problemlos mit einem Kraftkleber verkleben kann.&nbsp;Viel spaß damit&nbsp;Hello communityHere is a Bosch 18V battery holder (modular) for Bosch suitcases.Infinitely expandable for safe storage in a suitcase.The module has adhesive grooves in the lower area so that it can be easily glued with a power adhesive.&nbsp;Have fun with it

Bosch 18V Akku (Kofferhalter Modular)

Bosch blau

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more.  See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files.  <figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td colspan="3"><h3>Support and Access Exclusive Designs</h3>This model is available for free, but you can choose to make a small donation and receive one of these exclusive variants. Alternatively, you can join the <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables Club</a> to access all these models and many more.</td></tr><tr><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/iron-suit-edition-mobile-exo-suit" rel="nofollow noopener">Iron Suit Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/captain-s-legacy-edition-mobile-exo-suit" rel="nofollow noopener">Captain&#39;s Legacy Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/creations/battle-mech-edition-mobile-exo-suit" rel="nofollow noopener">Battle Mech Edition</a></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_bc423fbf322cf.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_c737f9d76a7dd.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_7509d2a60bb71.gif"></figure></td></tr></tbody></table></figure><h3> Introducing the Mobile Exo-Suit: Your Phone&#39;s Ultimate Armor</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_ateqzu20qo45.gif"></figure>This unique design combines functionality and style, resembling an exoskeleton or suit of armor for your device.The Mobile Exo-Suit is ingeniously designed to adapt to different phone sizes, ranging from 70mm to 95mm, ensuring a perfect fit for various smartphones. Once placed on the stand, your phone gains arms and legs, giving it a playful and dynamic appearance. Not only that, but the hands of the exoskeleton conveniently hold your charging cable when not in use, keeping everything organized.The core structure of the Mobile Exo-Suit serves as the base, providing stability and support, while an additional armor layer enhances its aesthetic appeal, allowing you to personalize your device in style. The Mobile Exo-Suit adds a touch of elegance to your mobile experience.Experience the ultimate combination of functionality and style with the Mobile Exo-Suit - a worthy place for your beloved device.No paint, no supports and no glue needed.<h3>Printing Instructions</h3>Files in STL format to print without any support or brim and already in the best orientation. Recommended layer height: 0.2mm.<h4>Files to print organized by color:</h4><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/" rel="nofollow noopener">Prusament PLA Blend Viva La Bronze</a><ul><li>Body-v2.stl</li><li>Arms-v2.stl</li><li>Legs-v2.stl</li></ul><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/" rel="nofollow noopener">Prusament PLA Prusa Galaxy Black</a><ul><li>Armor.stl</li></ul>Individual files and a tolerance test also included<h4>Tips</h4><ul><li>The body needs good bridges and a good first layer to print well.</li><li>Print the legs for strength, increase walls and infill.</li><li>Put the armor before joining the arms and legs to the body, don&#39;t mix left and right parts.</li><li>On the forearm armor, put the elbow first <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_6b4i1thveb1j.gif"></li></ul><h4>Bed adhesion problems?</h4><ul><li>Disable the Elephant foot compensation setting it to 0, as the model already has it.</li><li>To put brim on everything is really annoying to remove later. This technique allows you to put it only on critical parts and in an easy way to remove later:<ul><li>Right click on the model and select “Add part&gt;cilinder”</li><li>Scale it to 0.2mm heigth, edit only the height and click on “drop to bed” to make it flat in the bed</li><li>Now drag it to under the hand for example and you&#39;re done. Repeat the process to any pat that you want an extra adhesion. You can use and scale shapes as your needs.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_05osbsvfx5ow.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_kb21fikz1bow.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_wlztzmtn12tj.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_1hkki7rel13j.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_tjx12dzxbo1p.jpg"></figure>

Mobile Exo-Suit

Handy Tablett PC

papsjundi

This is my second design trying to come up with a solution for the “Jumping Spool” issues. I shared my first design “<a target="_blank" href="https://makerworld.com/en/models/37390#profileId-35773" rel="nofollow noopener">AMS SPOOL GUARD”</a>, but after that… I tried to document and learn a bit more to understand why do the spools jumps in the first place. I shared some slow-mo video on facebook groups and got so many feedbacks (and mockings) I think understanding the cause would help come up with a better solutions… I think up to 3 things contributes to the spool jumps 1. When the filaments are low, the angle becomes sharper / steep.. so the extruder makes a more forward pull instead of downward… 2. Extruder speed is faster than the Front Roller, so it was holding it back (plus sharper angle too) 3. Tangled filament so for Tangled filament, it's probably for someone smarter than me to solve lol I am attempting to eliminate or at least reduce cause number 1, which is height differences. First try, I tried to modify the first design, and move the “bar” from the back to the front, using the same mount (which was a nice secure spot mount it) The problem with that idea I don't have a place for the mount for the left and right side of the AMS… <img src="https://media.printables.com/media/prints/613353/rich_content/e37c8aab-0f0a-44d0-b74a-ccb176d3b0da/screenshot-2023-10-13-at-21225-pm.png#%7B%22uuid%22%3A%226533e8de-8244-4d91-8f45-3027d0872bba%22%2C%22w%22%3A2424%2C%22h%22%3A1488%7D">&nbsp;I also tried the suggestion using the AMS Button + a longer PTFE attached This helped to reduce the wear and tear but it the ptfe tube is so flexible so it will still bend and the spool jumps too. Some one also suggested putting a battery to wedge the spool so it does not wobble, I tried that too (using the same mount as my previous design) with removable “wedges” of various thickness <img src="https://media.printables.com/media/prints/613353/rich_content/698daa02-f726-48fd-9823-36b783c63904/ptfe.png#%7B%22uuid%22%3A%22f9afdcae-21e2-4bfe-9860-de866fae6acc%22%2C%22w%22%3A2275%2C%22h%22%3A1812%7D"> So instead I looked at the possibility of mounting it on the First Stage Feeder, so I took my spare one and measured the openings… <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/d227a3ad-e665-4d91-a4c0-1c112fbb242f/img_5562.jpg#%7B%22uuid%22%3A%222fa0137b-b5e8-45ba-a9bb-89d9003968fa%22%2C%22w%22%3A4032%2C%22h%22%3A2268%7D"></figure>&nbsp;<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/63fb7587-98e4-45af-b4a7-6221035b0033/screenshot-2023-10-12-at-84758-pm.png#%7B%22uuid%22%3A%22a9663804-c66c-4afc-b38a-89c9d5f7001e%22%2C%22w%22%3A2152%2C%22h%22%3A1550%7D"></figure>Went through several iterations until I come up with the latest one. No… it was NOT modelled after the Iron Throne :) <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/dcc3e938-d22a-416d-80d5-6ffd34569ae0/img_5563heic.jpg#%7B%22uuid%22%3A%22a9574cb1-cbdb-4c55-a05d-9f098a0b067c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>1 issue I found that, the filament will scar the Helper… This is just after 1 print… &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;So I added a 4x25mm SS rod on top, you can get them on <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">amazon</a> it should sit flush in the cavity provided. <img src="https://media.printables.com/media/prints/613353/rich_content/384ce9b8-e3f2-46a5-badf-d8dc2bee9a55/amshelper150.png#%7B%22uuid%22%3A%222f61f194-6b24-4b8c-b906-f8761571eeaa%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D">&nbsp;and here's the finished project… at least for now…<img src="https://media.printables.com/media/prints/613353/rich_content/bcfa4439-d640-4844-8efc-bf0ef2d0c409/img_5565.jpg#%7B%22uuid%22%3A%22dc375791-2af7-4e2b-b3c1-95ac90104a51%22%2C%22w%22%3A5712%2C%22h%22%3A4284%7D"> This is by no means it will fix all… but at least it “should” make the angle less steep… and the filament will go more straight down to the first stage feeder. I am still studying but at least this is for now one solution that might reduce the issues… I would love you to try and give me feedback… I included the 3MF for Bambu Studio, comes in 2 plates… if you want to use the <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">metal rod</a> and logo, you can print plate 1, if you don't then you can print Plate 2. 0.3 mm first layer , the rest 0.2 mm Layers - Adaptive Layer Gyroid infill at 30% to make it stiffer. Step files are also uploaded if you like to tinker / remix… please do. Any suggestion / comments please hit the reply :) <img src="https://media.printables.com/media/prints/613353/rich_content/b976f4ef-df35-4284-b3e9-64baceb676eb/build-plate.png#%7B%22uuid%22%3A%22dd3f7935-07e1-4c02-8237-642bb1697be8%22%2C%22w%22%3A2462%2C%22h%22%3A1318%7D"> Thank You! NOTE: this was designed for the original AMS, I have not tested with Hydra Mods… &nbsp;&nbsp;

Deko

Visitenkarte

Haushalt

Kids

Bosch blau

Handy Tablett PC

Drucker Zubehör