Ferooo

Officina23

This is the short version of my trusty clip to snap on the edge of the Bambu spool. Shape and measurements have been optimized to further improve attachment to the spool and the shortening allows you to further reduce printing times and the quantity of filament used.This clip will never come off accidentally and you can slide it along the edge to find the best position to hold the filament.&nbsp;You can use the clip with the AMS Lite without having to detach it, but if you are going to put the spool in the closed AMS you must first remove the clip. If you want a clip that doesn&#39;t have to be detached when using the closed AMS, consider downloading my “<a target="_blank" href="https://makerworld.com/it/models/59601#profileId-62387" rel="nofollow noopener">Bambu Spool filament Clip internal</a>” or the newest “<a target="_blank" href="https://makerworld.com/en/models/139661#profileId-152234" rel="nofollow noopener">Dual Slot Filament Clip</a>”.&nbsp;Please note: before downloading and printing third-party profiles, check that these have been first tested by the author and that they do not upload stolen images from those published by other users. Also check that the profile does not compromise strength, quality and printability just to save a couple of minutes of printing. This warning is not to discourage the contributions of many good designers, but to help exclude from Makerworld the many dishonest people who only upload rubbish!

Bambu Spool Filament Clip Evo Short

printer

Valeria Momo

Another Army of Cute Baby Ducklings🐥 , ready to cheer up your bath (yes, they floating on the water)!<figure class="image image_resized" style="width:39.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/564612/2024-02-13_21f3a7f738168.jpg"></figure>&nbsp;if you need a cozy space for you army, try my “<a target="_blank" href="https://makerworld.com/en/models/180101#profileId-198118" rel="nofollow noopener">Farm Play Set</a>”!<figure class="image image_resized" style="width:443.797px;"><img src="https://makerworld.bblmw.com/makerworld/draft/564612/2024-02-10_2739f7ff1e3b7.jpeg"></figure>&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.

Army of Cute Baby Ducklings

gescgebk

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

Wolverine Claws - Retractable, Spring-loaded, Trigger (No extra non printed parts needed)

cool

HSW Filament Spool Holder for Bambu Labs

Drink Holder for THERUN Treadmill (and others)