fabulosus

AU3D

Set of 81 sizes of IKEA Skadis pegboards. To enhance user convenience, I&#39;ve organized the files and print profiles based on the number of columns. The board are prepared for M4 countersunk screws (M3.5 will work as well, M3 probably too, but not tested). You can install these boards using my <a target="_blank" href="https://makerworld.com/en/models/418874" rel="nofollow noopener">IKEA Skadis Screw Spacers</a> which are available in 3 sizes ranging from 10 to 20mm.&nbsp;If you plan to install more than one of these boards in an array or a tiled setup, I recommend my <a target="_blank" href="https://makerworld.com/en/models/423635" rel="nofollow noopener">drilling jig</a> for this board that helps you align multiple boards as well as my <a target="_blank" href="https://makerworld.com/en/models/456425" rel="nofollow noopener">Multi Spacer Pack</a>:<a target="_blank" href="https://makerworld.com/en/models/423635" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000418809/design/2024-04-11_5d0270881036c.jpg"></a><h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>

IKEA Skadis

skadis

This decorative replacement offers an aesthetic upgrade to the standard AMS handle. To install, simply use a 1.5mm Allen key to remove the two screws securing the original handle.<h3>Printing Instructions &amp; Post Processing</h3>While Silk-PLA may seem like an attractive choice for its aesthetic appeal, its weaker layer adhesion can become problematic due to the repetitive pulling action on this part. Therefore, it is advisable to opt for more durable materials such as PLA, PETG, or ASA. I have obtained excellent results with Sunlu PLA Meta black, which boasts a glossy, silk-like finish.For optimal print quality, I recommend using a layer height of 0.12mm or smaller, along with 2-3 perimeters.Supports are necessary for the handle but can be removed with relative ease, except around the top teeth where extra caution is advised and you still might lose some teeth.&nbsp;If removing supports results in white marks, a quick fix involves lightly touching the affected area with a jet flame lighter. This method effectively blends in most imperfections.&nbsp;The screw holes require careful post-processing, as this area of the model is too intricate for supports. To facilitate smoother installation, I suggest pre-threading the holes by inserting the screws once before attaching the handle. This pre-threading ensures a more effortless final assembly.<h3>More Impressions</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000131404/design/2024-06-25_d9752a7317c1b.jpg"><figcaption><a target="_blank" href="https://amzn.to/3V7whbd" rel="nofollow noopener">Conjure Tricolor red yellow blue</a> (this has been printed with a free sample spool provided by Chitu Systems)</figcaption></figure>

AMS Handle - Dragon Head

Sonstiges

Benjamin Kott

<h3>Organizer Box (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/_2nHOIhereM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_2nHOIhereM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Punchhole Diameter</li><li>Punchhole Spacing</li><li>Corner Radius</li><li>Save space on the top and bottom</li></ul><h3>Customizing Tips:</h3><ol><li>If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.</li><li>If you adjust the corner radius, ensure that the desired size fits your desired width and length.</li><li>If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.</li></ol><h3>Why another box model?</h3>There are a lot of box models already available, but all I found were static,or have features or design aspects that did not fit my needs.&nbsp;I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates:</h3><ul><li>20.02.2024<ul><li>Added 20x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214791" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214791</a></li><li>Added 10x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214795" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214795</a></li><li>Added 15x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214801" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214801</a></li></ul></li><li>01.01.2024<ul><li>Added 2 new cylindric versions<ul><li>10x10x13cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126695" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126695</a></li><li>8x8x10cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126713" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126713</a></li></ul></li><li>Changed extrusion for the holes in the Fusion 360 model</li></ul></li><li>24.12.2023<ul><li>Fixed baseplate calculation in the Fusion 360 model</li></ul></li></ul><h3>More Fusion 360 Parameterized Models</h3><ul><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/114250" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_519e073d57512.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">Stackable Storage Boxes</a></td><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/147775" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_fb6186fdc76a4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">Boxes Diamond Edition</a></td></tr><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/392542" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-24_bbcd7d56b5ac1.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542" rel="nofollow noopener">Stackable Boxes</a></td><td style="width:50%;"> </td></tr></tbody></table></figure>

Organizer Box / Boxes

organizer

LuckyShot

Cat or dog food bowl / water. You can add a piece of wood engraved in the front or use the text and cat.

CAT FOOD BOWL OR WATER

wugge 

ShakaStudio

Textured Faces Series :Stoned : <a target="_blank" href="https://makerworld.com/en/models/45876#profileId-47671" rel="nofollow noopener">https://makerworld.com/en/models/45876#profileId-47671</a>Sliced : <a target="_blank" href="https://makerworld.com/en/models/93257#profileId-99667" rel="nofollow noopener">https://makerworld.com/en/models/93257#profileId-99667</a>Stoned Again : <a target="_blank" href="https://makerworld.com/en/models/116838#profileId-125606" rel="nofollow noopener">https://makerworld.com/en/models/116838#profileId-125606</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346295/2023-12-30_e619e0f2399fc.jpg"></figure>&nbsp;This model has been carefully designed to look great with 4 colors. Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier.If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.&nbsp;When scaling the model, scale in the X and Y direction only. Leave Z at 100%.&nbsp;Print at 100% infill with a layer height of 0.06mm with a base layer of 0.24mmSwap Instructions: Start with Black At layer #8 (0.66mm) swap to Dark Gray / Meta Gray At layer #14 (1.02mm) swap to PolyTerra Gray / Matte Gray At layer #18 (1.26mm) swap to White for the rest. &nbsp;

Stoned Again - 4 Color Hueforge Filament Painting

HueForge

Štístkáč

The Voronoi Bunny is a playful and artistic take on a classic rabbit figure. The model employs a Voronoi tessellation to create an intricate pattern of cells across the body, which not only adds a modern aesthetic but also can be fascinating to watch as it prints layer by layer.&nbsp;If you&#39;re looking to support my work or obtain a commercial license, consider joining a Patreon membership. (This model is included!)<a target="_blank" href="https://www.patreon.com/Stistko" rel="nofollow noopener">https://www.patreon.com/Stistko</a>&nbsp;Usage: Ideal for hobbyists looking for a decorative piece or a fun gift, this model would be a charming addition to any desk, bookshelf, or as a centerpiece in a themed collection. It&#39;s especially fitting as an Easter decoration or for someone who enjoys modern art in animal figures.

Voronoi Bunny

Ostern

BamBam Design

Kids Workspace - Screwboard for Desk and Wall (V1.1 Changelog @bottom)Designed for the next Maker Generation! 👦👧A very nice toy for childs where they could practice to use different tools for different screws.<ul><li>Use the included mount for the wall, you can simple slide the board above, so you can change quickly to the wall/desk.</li></ul>&nbsp;The Board has 12 threads, all same pitch, but with 3 different fittings & colors.There are 3 types of screws and 3 cool looking tools included for that:<ol><li>Phillips Screwdriver</li><li>Allen key with T-Handle</li><li>Wrench for outer Hex</li></ol><ul><li>The Screwboard has slots for the tools, 3 each at the front & top for desk & wall situation.</li></ul>I designed all parts with lowest possibility amount of color change and waste, but feel free to give it more color.&nbsp;Printed all parts in PLA+, my kids love it!Use some extra walls to make it stable!&nbsp;Step files are uploaded, i am exited to see some cool remixes! Create own tools or other screws and addons as remix as well.I will refer to good Remixes here:<ul><li>Real Bit adapter <a target="_blank" href="https://makerworld.com/models/100671" rel="nofollow noopener">https://makerworld.com/models/100671</a></li><li>Hex Nuts <a target="_blank" href="https://makerworld.com/models/120822" rel="nofollow noopener">https://makerworld.com/models/120822</a></li><li>Side Box <a target="_blank" href="https://makerworld.com/models/131870" rel="nofollow noopener">https://makerworld.com/models/131870</a></li></ul><figure class="media"><div data-oembed-url="https://youtube.com/shorts/L3hPdkHCCbs?feature=shared"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=L3hPdkHCCbs"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/L3hPdkHCCbs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>A like and follow costs nothing.👍Thank you and happy printing!&nbsp;ChangelogV1.1 Geometrical Change only to Base Part (Workspace V1.1.step)<ul><li>Added 2x4 M3 Nut Pockets as mounting holes at the sides for future upgrades</li><li>Added little nose to prevent sliding out to easily</li><li>Extra Wall at stress height (T-Handle & Phillips)</li><li>Extra Profile for ultra stable screws and 2 Parted T-Handle as option</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/770457/2024-01-08_90d21af4456ef.png"><figcaption>Mounting Holes Dimension - If you want to drill V1 or add some additional things.</figcaption></figure>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Kids Workspace - Activity Board for Desk and Wall

Kinder

Wing-Art

An egg cup with a classic design!&nbsp;This egg cup is characterized by a round inner shell that is perfect for holding an egg. The oval outer shell protrudes offset from the center, providing ample space for both a spoon and eggshells. The entire egg cup presents itself in a factual and classic look, which is both functional and aesthetically pleasing. Ideal for daily use or for special occasions, it blends seamlessly into any table decoration. In the profiles, there is a FLAT version of the egg cup with a smooth bottom as well as a STACKABLE version, which allows for the practical stacking of the containers. <a target="_blank" href="https://all3dp.com/2/food-safe-filament-brands-compared/" rel="nofollow noopener">HERE</a> you can find the Best Food-Safe PLA Filaments of 2023. A print in PLA is aesthetically pleasing, but please be aware that PLA may not be suitable for dishwasher use.  Just take a look at my other Household Tools here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/406101" rel="nofollow noopener">Kitchen Dispenser for Jars - Version 2 with Quicklock Mount</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkiin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li></ul>&nbsp;___________________________________________ &nbsp;Ein Eierbecher mit klassischem Design:Dieser Eierbecher zeichnet sich durch eine runde Innenschale aus, die perfekt für die Aufnahme eines Eies geeignet ist. Die ovale Außenschale ragt versetzt aus dem Zentrum heraus und bietet ausreichend Platz, um sowohl einen Löffel als auch Eierschalen aufzunehmen. Der gesamte Eierbecher präsentiert sich in einem sachlichen und klassischen Look, der sowohl funktional als auch ästhetisch ansprechend ist. Ideal für den täglichen Gebrauch oder für besondere Anlässe, fügt er sich nahtlos in jede Tischdekoration ein.  In den Profilen gibt eine FLAT-Version des Eierbechers mit einem glatten Boden an sowie eine STACKABLE-Version, die es ermöglicht, die Behälter praktisch zu stapeln. Ein Druck in PLA ist zwar ästhetisch ansprechend, beachten Sie jedoch, dass PLA möglicherweise nicht für die Verwendung im Geschirrspüler geeignet ist.  Schauen Sie sich hier meine weiteren Küchenutensilien an:<ul><li><a target="_blank" href="https://makerworld.com/de/models/94119#profileId-100760" rel="nofollow noopener">Kitchen Dispenser for Jars</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a>  </li></ul>

Egg Cup - EGG-citing Nest

Küche

JamesThePrinter

These Easter eggs are larger than normal. Actually, they are about the size on an emu egg! I would suggest that you choose 1-3 eggs and display them together. Adding extra eggs printed at varying scales can also look very nice. I have successfully tested them down to 25% scale with the exception of the Lattice Egg. The lattice is a retraction nightmare at smaller sizes. They should scale upwards without issue as well, but beware - they are pretty large already!&nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print SettingsBecause of the size, these eggs take a while to print. I found that I could speed up that process by limiting infill to critical areas only. Most of the examples above were printed at 0.2mm layer heights.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>MatterHackers Quantum Blue Raspberry PLA</li><li>MatterHackers Quantum Green Raspberry PLA</li><li>MatterHackers Quantum Blue Yellow PLA</li><li>MatterHackers Quantum Blue Green PLA</li><li>MatterHackers Quantum Silver Gold PLA</li><li>MatterHackers Quantum Pink Purple PLA</li></ul>

XL Easter Eggs

Satisartes

the Triplets are up! Print this guys to decorate your home at christmas

Triplets gnomes

Weihnachten 

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

things 

3Dimension Customs

Welcome to Crystal Mountain! &nbsp;Inspired by my daughter's desire to showcase her dragon, this cool stand will make your collection look awesome, with huge crystals and intricate details. Display your treasures with style! &nbsp;Added a painted version for use with ams but I would recommend adjusting your AMS settings to reduce waste. (try purging into infill) or disabling the Prime Tower.

Crystal Figure Display Stand

Displays 

MKCAMC

This is a modular shelf that can be expanded upon as much as you'd like. The side panels can also be scaled on the x and y axis to make each individual cube as big as you want. I've allowed a 0.2mm tolerance on the shelves (5mm slots and 4.8mm panels). I'd suggest printing a 2 way clip and a panel to test how the tolerances are on your printer. You can adjust the tolerance by adjusting the z thickness of the panels.&nbsp;I did print the clips without supports but that will be dependent on the capabilities of your printer. You may have to turn on supports for the horizontal slots. This is something else you should test before printing all of the pieces.&nbsp;I've included solid and honeycomb panels so you can build yours with any combination of the two that you want. Glue is not required as everything should be held together by friction.&nbsp;As mentioned, you can expand this system to be as large as you want. The example I printed consists of the following parts though:&nbsp;2x 4 Way Clips 8x 3 Way Clips 8x 2 Way Clips 12x Honeycomb Panels 2x Solid Panels&nbsp;The print profile includes all of the clips mentioned above. You'll just have to print as many of each panel that you want.

Modular Storage Cube Shelf

Home

Frikarte3D

NEW VERSION: <a target="_blank" href="https://makerworld.com/en/models/66639" rel="nofollow noopener">Bambulab Box with Flipped Logo</a>&nbsp;Are you a fan of Bambu Lab, the innovative company that creates 3D printing solutions and products? Do you want to store and organize your 3D printing tools and gadgets in a cool and convenient way? Then you need the Bambu Lab Box, a 3D printable model that lets you create your own custom box with the Bambu Lab logo.&nbsp;This box is a remix of the Tool Box by Yanev, but with the Bambu Lab logo on the top and a base with 6 compartments to hold your 3D printing items. It also has a latch and handles for easy opening and carrying.&nbsp;The Bambu Lab Box is compatible with all the <a target="_blank" href="https://makerworld.com/en/models/217203#profileId-236238" rel="nofollow noopener">Tool Box Bases with Compartments</a> models I designed, such as the ones with 2, 3, 4, 6, 9, 18 or 36 compartments. You can swap the base to create your own customized Bambu Lab box with different sizes and layouts. It will also be compatible with the future bases that I will design.&nbsp;If you want to avoid items shifting between compartments during transit and also optimizes the available 5L space beneath the toolbox lid you can print my <a target="_blank" href="https://than.gs/c/13653?affiliateCode=Frikarte3d" rel="nofollow noopener">Tool Box Trays</a>.&nbsp;The Bambu Lab Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. It is designed for an AMS (Automatic Material System) or MMU (Multi Material Unit), so you can print the top with the logo in different colors. You just need to load the top with the logo as a multipart model in the slicer and choose the filament wanted for each part. I uploaded the .3mf file sliced with Bambu Studio.&nbsp;I will also release a version with split parts for those who don’t have an AMS or MMU.&nbsp;For assembly you will need M3 screws or rods. I used 30mm length for the back and front holes and 40mm lenght for the handle. Buyed this ones: <a target="_blank" href="https://s.click.aliexpress.com/e/_DnNc7IR" rel="nofollow noopener">M3 Screws</a>&nbsp;Download the Bambu Lab Box today and show your support for Bambu Lab with this awesome box!&nbsp;ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.To sell them legally, message me so we can work out a deal.Hope you like it! Any advice, or recommendation is welcome! Happy Printing!I would be very grateful if you print it and put it on social networks to tag me at <a target="_blank" href="https://www.instagram.com/frikarte3d/" rel="nofollow noopener">@Frikarte3D</a>If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

skadis

Sonstiges

organizer

wugge

HueForge

Ostern

Kinder

Küche

Ostern

Weihnachten

things

Displays

Home

bambu lab