fabienly

glenngri

Updated 23/06/2024Please only use my profile as the additional profile has text error on lid.&nbsp;Updated 30/05/2024Fixed flipper text on front, replaced wifi board with new design&nbsp;&nbsp;Updated 18/01/2024Made a lip to hold the Wifi dev Board in the case to help prevent it falling out.&nbsp;&nbsp;Flipper zero case with seperate wifi dev boad case, multi coloured ready to print with no need to print the logo seperate.&nbsp;Bottom case is designed to have a silicon case installed around the Flipper Zero, if no silicon case is installed there will be a gap around the edges.&nbsp;you will need 6x M3-20mm for assembly.

Flipper Case inc WiFi Dev board - multi colour

Flipper zero

jsalonis

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5 PLA Kexcelled Light Brown Transmission Distance: 3.5 PLA PolyTerra Lime Green Transmission Distance: 1.5 PLA PolyLite Pro Light Yellow Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #24 (2mm) swap to Red At layer #53 (4.32mm) swap to White At layer #54 (4.4mm) swap to Light Brown At layer #55 (4.48mm) swap to Lime Green At layer #62 (5.04mm) swap to Light Yellow At layer #63 (5.12mm) swap to White for the rest.

Flipper zero

wall art