FAB DESIGN

Hugo

<h3>UPDATE : I redesigned the sketch for the gasket as it didn&#39;t follow the goemetry properly</h3>F3d files can fe found here : <img class="image_resized" style="width: 66.61%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000377006/design/2024-05-14_d731cefc07259.png"><img class="image_resized" style="width: 26.88%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000377006/design/2024-05-14_c38b368008348.png">&nbsp;I revamped the SnapLock storage boxes, transforming them into parametric Fusion 360 files. Additionally, I integrated a gasket for improved alignment between the two sides, and implemented a poka yoke mechanism to prevent incorrect mounting of the latches.With the original model, I was surprised to notice that many people tend to assemble the latch backward, resulting in difficulty when opening it. In this new model, I&#39;ve incorporated a small bump to prevent backward mounting entirely.<h4>Disclaimer :</h4>This is my first model using Fusion 360, I usually use Solidworks. Please be understanding if there are any mistakes in the model. Additionally, I have not set specific limits on the parameters but have provided minimum values in the comments. Should you attempt to go below these minimum values, the model may fail to reconstruct correctly, and I recommend restarting from the initial file.&nbsp;<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>&nbsp;<h3>Size :</h3>I have created two versions: a single-latch variant for smaller boxes and a dual-latch variant for larger ones.Furthermore, I have shared the STEP files for both models.&nbsp;<h3>How to modify the box :</h3><ol><li>You need to have Fusion 360 downloaded</li><li>Open one of the files and in the “MODIFY” menu choose “Change Parameters” as shown :<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000377006/design/4c88686f-b6f6-4b44-ad3a-d7336b648b8f.jpg"></li><li>A window pops up and you can modify the parameters in the “Favorites” section :<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000377006/design/4fc8f5ff-81c2-4192-950d-4f6ad278763e.jpg">I added the minimum value for each parameter before the model breaks</li><li>Export, print and enjoy !</li></ol>&nbsp;

SnapLock Storage Boxes (parametric)

boite

FunkyArt

A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. &nbsp;The versatility of this arm enables secure and flexible positioning of smartphones or even tablets and cameras (coming soon) in any desired orientation. Print with high infill and clean up the prints carefully, the minimal gap dimensions of the 3D printed parts ensure reliable function and solid haptic but could also be hard for some printers. &nbsp;You find more additional features and alternatives in the Download section. I will provide more Instructions soon.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FxNsubX2KjE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FxNsubX2KjE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;There are some additional upgrades in the download section, such as additional phone rotating movement and counterscrews, less tight screws and a bigger phoneholder.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_f7836c4a1c65.png"></figure><figure class="image image_resized" style="width:98.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_a6107c3f6e376.gif"></figure>What to Print?<ul><li>1x CZFA_Flexframe_BaseA_part11x CZFA_FlexFrame_BaseA_part2</li><li>1x CZFA_FlexFrame_PhoneMount (or the optional bigger one)</li><li>1x CZFA_FlexFrame_Mount-Mount (or the optional one with rotating axis)</li><li>1x CZFA_FlexFrame_Screw_cap-lid</li><li>1x CZFA_FlexFrame_Screw_small_Phoneholder</li><li>3x CZFA_FlexFrame_Frame_25cm</li><li>4x CZFA_FlexFrame_Screw</li></ul>Additional parts for rotating your phone, small phones adapter or counters crews..<ul><li>CZFA_FlexFrame_mount-mount-additional-movement-2-2</li><li>CZFA_FlexFrame_mount-mount-additional-movement-1-2 (you will need also one more small screw)</li><li>CZFA_FlexFrame_PhoneMount-small_phones_adapter</li><li>CZFA_FlexFrame_XL-PhoneMount</li><li>CZFA_FlexFrame_Counterscrew (optional to add more weight)</li></ul>Also less_tight versions of the screws.

Flexible & sturdy phone arm (100% Printed)

SMARTPHONE

Fyrby Additive

V-Spooler

respool

Josh-3D

<h3>Model</h3>A phone stand to go along with the<a target="_blank" href="https://makerworld.com/en/models/189326#profileId-208776" rel="nofollow noopener"> Headphone stand I made!</a> A few people had suggested this, so figured why not?&nbsp;Model is featured in Bambu PLA Matte Charcoal, and Bambu Iridium Gold Metallic for the main print. For the second print, it is featured in Bambu Charcoal and Polymaker Muted White.&nbsp;(Keep scrolling past the updates for required hardware and assembly instructions!) &nbsp;[Update 1]I added a step file for the main phone holder, to the raw files, to make it easier to adjust for other sized phones/devices that don't fit into the holder as it is now! If you modify the phone holder portion, please share! You can include the modified holder as a new print profile (No need to donate points, you did the tweak!), or if you'd prefer, you can just post it as it's own object. Just send me a link, and I'll add it in the description here to help make sure people find it.<figure class="image image_resized" style="width:30.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-26_265822ae21a7.png"></figure>[Update 2]I added a print profile that provides a variation on the holder part, adding in holes on the bottom to better allow for a speakers/mic to work without interference, as a user had requested one. <figure class="image image_resized" style="width:30.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_a1b94dad29915.png"></figure>[Community Spotlight]Thanks to <a target="_blank" href="https://makerworld.com/en/u/1489256341" rel="nofollow noopener">o.0jack</a> for the a1 mini profile<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_ada1894ffcacd.png"></figure><a target="_blank" href="https://makerworld.com/en/u/4171661601" rel="nofollow noopener">rakibby </a>has provided a version of the holder that's a little deeper (17mm!) so if you've got a thicker phone, check out rakibby's print profile! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_1fd7a9c8d8b06.png"></figure><a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Design</a> has made us a <a target="_blank" href="https://makerworld.com/en/models/217683#profileId-236629" rel="nofollow noopener">TPU Sock</a> to help keep the stand in place. They look great and match the style! <figure class="image image_resized" style="width:29.75%;"><a href="https://makerworld.com/en/models/217683#profileId-236629" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-03-01_7d2974c2e301d.png"></a></figure>&nbsp;[Tools & Assembly]Like the Headphone stand, the cell phone stand is pretty easy. You'll need the following hardware and tools.I designed this to use M3 socket cap screws.Hardware Needed:M3x12 - 4 (used for the feet)M3x25 - 3 (Used to connect the swing arm to the stand, and the phone holder to the swing arm)M3x30 - 1 (Used for the knob for the swing arm)M3xNuts x 9 (The knob makes use of two nuts!)Tools Needed:Hex DriverDrill bit for clearing holes&nbsp;Start by drilling out the holes in the feet and knob. These holes were partially blocked to get a cleaner print. All the other holes should be sized that a M3 screw can fit through without being too tight, but things like variation in filament properties might make the holes tight, so if you can't freely push a screw through the holes in the frame, clear them out with an appropriately sized drill too.<figure class="image image_resized" style="width:49.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_dee28ae5b0db5.png"></figure>Next, Prepare the knob! We'll feed a M3x30 screw through the hole and through a nut that'll be embedded on the other side of the knob. Tighten it down!<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_27826e74eb785.png"></figure>Now we'll assemble the main frame! There's embedded slots for all of the M3 nuts, so go ahead and prepare by putting all the nuts in place. Next, we'll install the feet, as once the holder and swing arm are on, it can obstruct access to the screws for the front feet. Use M3x12 screws for the feet! For the swing arm, attach the two phone holder sides using M3x25 screws. Attach the arm to the base using a M3x25mm screw, but make sure not to over tighten it as we don't want the hing to be too stiff! Lastly, install the knob through the guide and swing arm and tighten it down!<figure class="image image_resized" style="width:73.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_9f8ad10fc9a09.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Phone Stand - Industrial 

design

jakub-k

New side filament holder for bambulab printers, designed to fit in place of the original rear facing mount.<ul><li>No any other hardware needed.</li><li>It is designed for printing without support.</li><li>It can be printed with PLA, PETG, ASA, ABS…</li></ul>

Filament side holder for X1C/P1S/X1E

Szaman

Asus Republic of Gamers Coaster

GAMERS

JimmiboY - Youtube

I designed this small box storage system for the IKEA Skadis, perfect for keeping your small item organized like (cabels, charger plugs, and so on) They are designed to they fit on top of each other, with grip designs on the sides, and place for a label in the front.&nbsp;watch my video about this:<figure class="media"><div data-oembed-url="https://youtube.com/shorts/899qosfKkr8?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=899qosfKkr8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/899qosfKkr8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Make sure to subscribe, and watch my other cool designs!&nbsp;

IKEA skadis, box storage system

SKADIS