evilinheaven

alexmills97

This has been designed to allow the user to use any 12mm hex wheels to control steering inputs to the car. Personally I found the stock wheel slightly too small, this adaptor allowed me to use a 1/10 foam tire which is slightly larger.<h3> Print Settings</h3>Supports:YesResolution: <div>0.16</div>Infill:35 Notes: <div>Print hex facing down with supports </div>Category: R/C Vehicles

FlySky GT5 12mm Wheel Adaptor 

RC stuff

Josh-3D

I present to you today, a poker chip set for Monopoly! With Case!&nbsp;I had a friend that plays poker, but also enjoys Monopoly, and he got me hooked on the idea of using poker chips instead of the paper currency with monopoly. I designed this to be a custom fit set for Monopoly! Along with a case to keep it tidy.&nbsp;The print profiles are setup so there&#39;s 10 poker chips per a plate for each value. All in all you need 30 poker chips per a value. I wasn&#39;t sure if I should set the profiles up to only have one pokerchip on them, or try and cram them all on there. I printed them off in batches of ten though, so decided to keep it like I printed it. Should be easy to adjust for your own needs, if you want more or less. I recommend printing the poker chips on a smooth pei bed!&nbsp;The case comes in it&#39;s own print profile, as there were a number of custom settings setup for the poker chips to make them best. Of note on the poker chips, I set them to 100% infill, so they have a little more weight to them like real poker chips. I also had to adjust a few other settings to make sure the inset on the face facing down, prints nicely. Lastly, the poker chips are setup to us ironing for the top face!&nbsp;[Update] I have produced an A1 Mini version of the case, for the A1 Mini uses. Follow the Link <a target="_blank" href="https://makerworld.com/en/models/436699#profileId-341871" rel="nofollow noopener">HERE for more information</a><figure class="image image_resized" style="width:43.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000155467/design/2024-04-20_a48eace5ac067.jpeg"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Monopoly Poker Chip set w/Case

toys

mystoopidstuff

Please keep all these small parts away from children and pets, they could be a choking hazard.This bin is designed to work with the <a target="_blank" href="https://makerworld.com/en/models/159840" rel="nofollow noopener">Gridfinity Box For Stuff V2.1</a>, and is 6U high with a 1x2U footprint, but it will also work with other cases which have a 6U bin height. I found that after loading up my case with small screws, it was a bit of a pain to get them out. I previously designed a <a target="_blank" href="https://makerworld.com/en/models/237151#profileId-253210" rel="nofollow noopener">magnet pickup tool</a> which uses a 5x15 magnet, so just did something similar (with a bigger <a target="_blank" href="https://www.amazon.com/dp/B0C65BVQJB" rel="nofollow noopener">6x25 magnet</a>) for this model. The reason for the larger magnet is due to the less powerful magnetic attraction of Stainless steel, so I though a bigger magnet would help (and it does).This print is straight forward, and the only thing I can recommend is a brim for the tool handle. I tried out a very light fuzzy skin on my print, which looked OK, but that is just a suggestion.&nbsp;Assembly info:I thought I would need to superglue the magnet into the handle, but as it turned out it&#39;s a snug fit without glue. I just pressed the magnet in, but it does take some work - though no tools should be required. If using this with a case though, be sure to press the magnet in far enough that the lid will close (it has to go all the way). If you find that the magnet won&#39;t press into the handle, there is another model with a looser bore (6.4mm) which you can use (2x1X6U_Magnet Pickup Bin_V4T_TOOL_HANDLE_LOOSE.STL), but that will require glue.Be careful when installing the magnet in the tool handle, since if too much force is used the magnet could break or fracture (to be save safety glasses and gloves are a good idea).&nbsp;Other stuff:&nbsp;If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff <a target="_blank" href="https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs-20-bin-version-20" rel="nofollow noopener">20 bin </a>and <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin </a>cases (or other 6U tall cases):<ol><li><a target="_blank" href="https://makerworld.com/en/models/237116#profileId-253187" rel="nofollow noopener">1 compartment 2x1 (3U, 6U, 9U) bin with a magnet pickup tool</a></li><li><a target="_blank" href="https://makerworld.com/en/models/416342" rel="nofollow noopener">1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405008" rel="nofollow noopener">1x2, 1x3, 1x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405004" rel="nofollow noopener">2x2, 2x3, 2x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405013" rel="nofollow noopener">3x3, 3x4 (6U, 9U  and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/443705" rel="nofollow noopener">4x4, 4x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li></ol>If you want to check out my other Gridfinity cases, you can find them at the links below:<ol><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/159840#profileId-266789" rel="nofollow noopener">20 bin (6U)</a></li><li>Gridfinity Box For Stuff <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin (6U)</a> (max size for a Bambu X1C/P1S)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386034#profileId-286398" rel="nofollow noopener">16 bin (6U)</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386041#profileId-286401" rel="nofollow noopener">16 bin - 12U deep version</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/389651" rel="nofollow noopener">2 bin (6U)</a> (small test version)</li></ol>&nbsp;If you find these models useful, please post a like or a comment with some pics of your prints.You can find the other things I&#39;m working on at my blog <a target="_blank" href="https://www.mystoopidstuff.com/blog" rel="nofollow noopener">here</a>. You can also follow me <a target="_blank" href="https://makerworld.com/en/@mystoopidstuff" rel="nofollow noopener">here </a>or on Printables to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/mystoopidstuff" rel="nofollow noopener">https://www.buymeacoffee.com/mystoopidstuff</a>&nbsp;Thanks for looking!&nbsp;

Gridfinity Bin 1x2 with Small Parts Magent Tool

Organização

Downloaded Goods

After searching for a showerhead holder to 3D print and not finding anything that matched the aesthetics I was looking for, I decided to design my own. This is what I came up with:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000382428/design/2024-03-19_b6bcc2c703dc9.png"></figure>&nbsp;In the files, you will find variations of the “Showerhead adapter” STL to fit 18, 20, 22 and 25mm rods. Print the size that matches what you have at home. Print this part with normal supports with 30-degree threshold angle. I had some failed prints when I printed with less than that or with Tree supports. This file prints two parts that go together, when you remove the supports you should end up with 2 parts like in the picture below:&nbsp;<figure class="image image_resized" style="width:38.56%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000382428/design/2024-03-19_c522256dc2b7c.png"></figure>&nbsp;On the print profile, you will find four plates with the best print setup I found, each for a specific variant.Print the one that fits your shower setup:Plate 1: 25mmPlate 2: 22mmPlate 3: 20mmPlate 4: 18mm&nbsp;The pieces simply screw together, just like a regular showerhead holder. The piece highlighted in the render below serves to apply friction to the shower rod.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000382428/design/2024-03-19_ed3f4b8f4eb5.png"></figure>&nbsp;If your showerhead fits a bit loose, I recommend gluing a piece of waterproof rubber tape on the inside. I didn&#39;t need it in mine and I am using it without issues.&nbsp;<figure class="table"><table style="border:8px solid hsl(270, 75%, 60%);"><tbody><tr><td>If you would like to see more models like this, consider giving it a boost 🚀🚀🚀 . It helps me buy filament and material to prototype and test new models!</td></tr></tbody></table></figure>&nbsp;Happy showering!&nbsp;

Elegant Shower Head Holder for 18-25 mm rods

Banheiro

Usmar19

This model was made by doogielabs. I just put it through Bambu Studio and uploaded it. &nbsp;To use, remove the collar and collet from the Dremel so you have only the threaded spindle left. Carefully push and thread over the spindle until full depth is achieved, the tapered part at the end helps with center. The tip acts as filler rod and you add heat into the part through friction. This in many ways works like stick welding, where the electrode also acts as the filler media. There are many parallels to regular welding when it comes to using this. For example, it is possible to burn through thinner walled parts when making repairs. Leveraging techniques such as creating a V shape place with thicker walls around the seams where joints will be made really helps with welding.

RC stuff

toys

Organização

Banheiro

Tools