ethanmckellar12

Loubie3D

This is a multi colour version of my pig model I made ages ago. Never did anything much with it because I never had a reliable multi material printer&nbsp;This pig scales well but I would probably not go much below 70%&nbsp;Pigs in the pictures and in the 3MF are at 70% - these print without support. 100% will print without support but much larger will likely need support of some kind. Piggies were printed at “sport” speed

Multi colour piggy!

animals

DonMatis

One Piece wall art for decoration, can be painted with more colours after.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA+ Sunlu Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA Bambu Labs Basic White</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Gray until layer #10 at 0.88mm</li><li>Light Gray until layer #19 at 1.6mm</li><li>White for the rest.</li></ul>

animals

Anime