3d printed robot

hellothere

Unveil the Klein Bottle 3D Model&nbsp;Step into the world of mathematics with our Klein bottle 3D model. This captivating piece showcases the intriguing realm of non-orientable surfaces and topology. Perfect for those curious about abstract geometry.

3d Mobius Strip (Klein Bottle)

cool!

Barefoot Brothers

Remove all walls, top and bottom layers, and infill density, switch the infill to gyroid, or whatever you like, and print with TPU for a super squishy and satisfying pad!&nbsp;Print settings:Wall line count: 0Top layers: 0Top layers: 0(You only want infill, so remove all top and bottom layers and walls)&nbsp;Infill Density: 10%(You can raise this for more thickness and resistance or lower it for more squishiness and higher visibility of the pattern)Infill Pattern: Gyroid(You can try other patterns as well!)Make sure you have no gradual infill steps or the infill will increase in density when it gets to the top of the print.&nbsp;Print speed: Doesn&#39;t matter, just not too crazy because the travel speed is affected by it.Infill speed: 30mm/sInitial layer speed/Infill initial layer speed: 15mm/s(The infill speeds are the only things that really matter, because that is all you are printing; however, make sure to set them very low, because TPU needs slow speeds for printing)&nbsp;Here is an example of the settings in cura:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000470424/design/2024-05-20_228c0af8b8995.png">&nbsp;&nbsp;Here is an example of the settings in Bambu Studio:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000470424/design/2024-05-20_dd49b2b4d8308.png"></figure>Speeds:<img class="image_resized" style="width: 69.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000470424/design/2024-05-20_ccc834333b7ca.png">

cool!

fidget