Coffee mmMMmm

TheBavarianModelMaker

This JetSki is designed to be printed on a PrusaMini and therefore cut into mutiple segments. <h3>Parts List</h3><ol><li>Every stl-file printed once</li><li>1x Brushless motor 3652 3000 KV <img src="https://media.printables.com/media/prints/405665/rich_content/ba4033c6-8e01-4f5a-b549-b08b2bcfbc78/image.png#%7B%22uuid%22%3A%22b67cce95-cc2d-49eb-97b2-1aa09748fc9e%22%2C%22w%22%3A600%2C%22h%22%3A600%7D"></li><li>1x Midi-Servo <img src="https://media.printables.com/media/prints/405665/rich_content/2f580c6c-ddc7-435c-9b89-ecfbdd26fc9c/image.png#%7B%22uuid%22%3A%222ae08e50-4b82-403d-a211-4e19618a3f6e%22%2C%22w%22%3A1000%2C%22h%22%3A1000%7D"></li><li>1x rubber seal <img src="https://media.printables.com/media/prints/405665/rich_content/eb5f13c9-6906-4db5-a6c2-5612ad536d14/image.png#%7B%22uuid%22%3A%222d391a18-3447-4af3-8266-a28d3dcd3620%22%2C%22w%22%3A800%2C%22h%22%3A800%7D"></li><li>1x 3mm stainless steel shaft</li><li>1x 3mm o-ring</li><li>1x 3.17mm to 3mm coupling</li><li>4x M4 square nuts</li><li>4x M4x10mm bolts</li><li>6x M2x4 threaded insert</li><li>6x M2x6 stainless steel bolts</li><li>3x M3x10mm bolts</li><li>1x 3mm brass bushing</li><li>1x 3mm brass bushing with flange</li></ol><h3>YouTube</h3>Take a look at the video for more details and the assembly process.<figure class="media"></figure><figure class="media"></figure>

RC JetSki

TripleGWorkshop

Choose deep or normal pockets- Scale up to fit any size rod. Bedroom closets, filament storage & more!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/202804/2023-11-20_8dgsd5dkv484.jpg"></figure>

Closet Rod Holders for 1.375 inch/34mm pole

around the house

Black Jack

<h2>Summary</h2>I am very thankful to <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Mr Benoît Lussier</a> for his feedbacks which has helped me refine the model further. <img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-05_bfcf275291314.gif"><h2>There are three ways to print this.</h2><ol><li>As single piece:- Please download STL file but there wont be any movements.</li><li>Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT. Please use the 3mf file for assembly also.</li><li>Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this.</li></ol><blockquote><h2>Upgraded Cylinders & Pistons</h2>I have upgraded the cylinders and pistons to allow locking of the front loader arm and buckets at different position by using a small piece of 1.75mm filament. Please see the GIF image for details. This locking can only be done for static displays. I haven't upgraded the original model 3mf file or the print profile, instead I had added seperate 3mf files and profile for the upgraded parts. This has been intentionally done to get feedbacks from the makers before making the upgrades permanent. It also gives the user freedom to choose how to make. This also help those who have already made the model to make upgrades. Those interested in upgrades can look for the profile with the name “upgraded cylinders and pistons” or 3mf file.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-10_9ac350010b4da.gif"></figure></blockquote><h2>ASSEMBLY OF MAIN BODY</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2023-10-20_aa7387dcc762.gif"></figure><h2>ASSEMBLY OF FRONT LOADER</h2><figure class="image"><img src="https://media.printables.com/media/prints/570824/rich_content/ee18a9f9-7047-4e93-8143-c3cefa6495ec/ld.gif#%7B%22uuid%22%3A%2215005cae-6a16-4329-bf35-bc951f4db4d7%22%2C%22w%22%3A800%2C%22h%22%3A450%7D"></figure><h2>MATING OF MAIN BODY AND FRONT LOADER</h2><figure class="image"><img src="https://media.printables.com/media/prints/570824/rich_content/caf701cf-7855-4212-8ebb-4af4e70e1889/ezgif-4-119f29bca1.gif#%7B%22uuid%22%3A%2219867a17-8e18-4375-bd00-91a232bb5466%22%2C%22w%22%3A800%2C%22h%22%3A410%7D"></figure><h2>Movements Included</h2><ol><li>Front Section Rotation</li><li>All Wheel Rotation</li><li>Front Loader Full Movement</li><li>Engine Bay Doors</li></ol>The main body is made hollow to ensure filament savings.The screws are need to fix the front and back axles which are also marked.The front loader assembly is made up of pins of same size but there could be tolerances issues when you print. So I insist that you first test print a pin and try the fit and accordingly scale down or up the pin.Supports should be provided as required.Appreciate the makes uploads.Open for suggestions.<h3>This model has been refined with the inputs and support of <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Benoît Lussier</a></h3><a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://www.buymeacoffee.com/assets/img/guidelines/download-assets-sm-1.svg" alt="Alt text"></a>  <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-10_833e9bfdbf3.png"></a>

Yellow Front Loader with Movements

cool

Imaginarydave

<h2>Designing this took weeks of work and testing.   Your boosts are an appreciated form of thanks </h2>&nbsp;Update: I added a mirrored version of the bases and the manifold for those that want to mounth this somewhere other than on the printer or for those with a k1 max.&nbsp;Update #2: Enclosure file is up! check it out over at. <a target="_blank" href="https://makerworld.com/en/models/105490#profileId-112584" rel="nofollow noopener">https://makerworld.com/en/models/105490#profileId-112584</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/2023-12-23_b2f1da0f06987.jpg">Update 3: changed print profile to use glued dowels to hold the two parts together.  I think this will sove the most common problem of getting things to line up.  &nbsp;This solved my biggest beef with day to day use of the printer……. changing filaments. &nbsp; I had a few goals.<ol><li>Be able to load filaments from the front.</li><li>Be able to leave my regularly used filaments in place</li><li>Have a place to hold filament when not in use to keep it from unrolling (you cant see it but there is holder behind each loading spot on the manifold.</li><li>be quiet - ie no rubbing.</li></ol>You&#39;re gonna need a few parts<ul><li>I used 4mm OD, 3mm ID PTFE tube to try to reduce friction. I ordered this stuff. <a target="_blank" href="https://amzn.to/46UgvDl" rel="nofollow noopener">https://amzn.to/46UgvDl</a> (bambu labs 4mm/2.5mm should work but you will definitely need to bevel entry points.)</li><li>PTFE tube connector. I used the Bambu labs one <a target="_blank" href="https://us.store.bambulab.com/products/ptfe-tube-connector" rel="nofollow noopener">https://us.store.bambulab.com/products/ptfe-tube-connector</a> you could also use one of these from amazon <a target="_blank" href="https://amzn.to/3RLyR5f" rel="nofollow noopener">https://amzn.to/3RLyR5f</a> . alternatively you could use a single piece of tubing that runs all the way from the extruder to the manifold but I wanted the option to disconnect at the machine.</li><li>8mm x300mm rod. <a target="_blank" href="https://amzn.to/3RAq5qj" rel="nofollow noopener">https://amzn.to/3RAq5qj</a> alternative link: https://amzn.to/47hFPmF</li><li>M10 push connector for PTFE tubing. I used these <a target="_blank" href="https://amzn.to/3TcCwKm" rel="nofollow noopener">https://amzn.to/3TcCwKm</a></li><li>M3 Heat set threaded inserts. I used ones from this kit. <a target="_blank" href="https://amzn.to/4a8hv9L" rel="nofollow noopener">https://amzn.to/4a8hv9L</a> but you could just buy M3 size which is the size I use the most for projects like these. <a target="_blank" href="https://amzn.to/3NksT8C" rel="nofollow noopener">https://amzn.to/3NksT8C</a></li><li>Sixteen 608-zz bearings. I use these. <a target="_blank" href="https://amzn.to/4afBenR" rel="nofollow noopener">https://amzn.to/4afBenR</a></li><li>M3 screws. I think I used mostly 10mm, but if you dont have a huge assortment of these already you should so get a variety and figure it out!</li><li>nylon washers I used ones from this kit. <a target="_blank" href="https://amzn.to/41hQDQz" rel="nofollow noopener">https://amzn.to/41hQDQz</a> 1.5mm thick. but I will also include an .stl file. you should be able to print them.</li><li>I used non slip glass top pads that I had around the house to keep it from sliding around. I am sure many different things could be used. These are what I use and it wont slide at all. <a target="_blank" href="https://amzn.to/3Njf5uU" rel="nofollow noopener">https://amzn.to/3Njf5uU</a></li></ul>How to do it…. you have to be detail oriented and if you skip any steps or have any rubbing it will cause problems.<ol><li>Print bodies as indicated in file notes.</li><li>While they are printing soak the bearings in denatured alcohol overnight, dry them out and the relube with a light oil like 3 in 1 oil or I used sewing machine oil. you need the bearing to spin like you would want them for a fidget spinner.</li><li>Heat sink the threaded inserts into the holes on the front of the bases.</li><li>using CA glue connect the bases together using the dowels.</li><li>Screw the manifold to the front</li><li>Fit TPU bearing covers over the bearings.</li><li>The fun part…… slowly fish the rods from right to left inserting washers and bearings as you go. there should be a washer on each side. this keeps bearings and rolls from rubbing the sides. The left side of each roller space should have the beveled bearing covers with the sharp edge to the left. in cross section it should look like this. The orientation of bearings on the right doesnt matter. Once they are all in make sure the TPU covers area aligned and not rubbing. they should spin freely.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/92598ce5-25e7-4f56-b434-f6b64c34c06a.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/d7e3122b-9a0d-4954-ab71-f1540a11ec56.png">  </li><li>once you have all 8 pieces through put screw the cover on to hold the rod in place - if you are printing the enclosure you can just leave them off the enclosure will keep the rods from coming out. </li><li>Assemble the manifold.<ol><li>cut 4 pieces of PTFE tube perfectly square and long enough to leave about 2-3 cm sticking out from the top of each loading point. seat them all the way.</li><li>screw the PTFE M10 connector into the manifold.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/32e3f901-4987-49f4-bd7e-86cf8341156a.png"></li></ol></li><li>Place a coupler on the end of the PTFE tube coming out of the machine and attach PTFE tubing from that point, through the holders to the manifold.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/24be0f7d-c06b-4884-9157-b27d22c1ccd5.jpg"></li><li>PRINT AWAY  </li></ol>&nbsp;&nbsp;EDIT:&nbsp;DrHO1337 over at printables has some code on his model (found here <a target="_blank" href="https://www.printables.com/model/621741-bambu-lab-manual-material-system" rel="nofollow noopener">https://www.printables.com/model/621741-bambu-lab-manual-material-system</a> ) that might make material changes easier for people who want to do simple prints with multiple colors. This model was initially just made for use with single color prints. give it a try. I havent used it. and give the guy a thumbs up over there.&nbsp;here are his instructions:In order to use the slicer correctly, like an AMS, you have to change the filamentchange gcode in the printer settings. The corresponding g-code is in &#34;noAMS.txt&#34;.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/704c2202-1f8e-45e8-8cc8-147f0697874d.webp">  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Bambu Labs MMS (Manual Material System)

Scattered Collectables

V5 Duct added, has better aimed cooling but i have not tested yetRear mounted 5015 parts cooling duct for Sovol SV062 M3x20 bolts and washers needed for the printed mount to replace the two 16mm bolts in the back of the print head assemblythe fan sits in snug, but you can also use a 25mm or longer m4 bolt/nut and a m3x12 bolt/nut secure the fan. you can also adjust the height of the ducts, which you will need to set when installing. this also allows for the use of non standard size nozzles.minimal supports needed &nbsp;&nbsp;&nbsp;

SV06 5015 part cooling duct

SV06

DopamineDesigns

NEEDS 3 LONGER SCREWS TO ATTACK FROM THE TOP OF THE FAN. &nbsp;JUST USE AUTO GENERATED ORGANIC SUPPORTS AND PLACE THE PART DIRECTY ON ITS BACK. &nbsp;SHOUD PRINT IN AB0UT 20 MINUTES ON AN AVERAGE MACHINE.

COLD AIR INTAKE FOR ELEGOO NEPTUNE 3 PRO/PLUS/MAX

Elegoo Neptune 3 Max

mateibocancios

For “The Office” fans. Hang it on your office walls.

The Office Sign 

The Shop

Printsmiths

The Gen 2 Cord Case simplifies and improves cable management, with new options to secure and organize any type of commonly used cable, such as USB-A, USB-C, Lightning, Micro USB, and even headphones.

RC

around the house

cool

P1P

SV06

Elegoo Neptune 3 Max

The Shop

tools and stuff

Celeste