erik.canaria

jWilli

This is a simple frame for you to be able to wrap your earbuds around to avoid the endless tangle that forms in your bag or pocket. I found a similar model somewhere a while ago, but I made some changes to accommodate the Apple earbuds. &nbsp;Enjoy!

Earbud Holder / Wrap

organizational

达文西FPV

关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！<ul><li>Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!</li><li>Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!</li><li><a target="_blank" href="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili</a></li></ul><figure class="media"><oembed url="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure><a target="_blank" href="https://www.douyin.com/user/self?modal_id=7369237370975096118" rel="nofollow noopener">达文西FPV的抖音 - 抖音 (douyin.com)</a>

My Neighbor Totoro Bus龙猫巴士

articulated prints

BigBricks

Find printing/assembly instructions <a target="_blank" href="https://thangs.com/designer/BigBricks/post/Boba%20Fett%20%2ANEW%20RELEASE%2A-580" rel="nofollow noopener">here</a>.&nbsp;This model was originally uploaded to <a target="_blank" href="https://thangs.com/designer/BigBricks" rel="nofollow noopener">my Thangs.com profile</a> and may be outdated. Follow me on there for the most up-to-date files and to see my new content coming up! You can also use code THANGS50 for 50% off your first two months of membership there to access my exclusive models! &nbsp;If you want to sell prints of these files please go sign up for my commercial license at the above Thangs link! ^&nbsp;Come join the community on discord to chat about future designs, give feedback, and ask the group questions: <a target="_blank" href="https://discord.gg/vMKRxGFbwg" rel="nofollow noopener">BigBricks Discord</a>

Boba Fett - Big Brick Figure

lego

STomHacks

UPDATE : 08/02/2024 - Fixed the closed rails on Vallejo 1x5 module and removed holes on bottom part of the modules I wasn't happy with the models available to organizer my paint bottles, I decided to create my own design with this modular paint rack system. With this system you can assemble the modules you want for the different sizes of bottles like Vallejo, AK or citadel paints. It's easy to assemble and they're available in different numbers of bottles per module.  If you have some suggestions or ideas you would like to see don't hesitate and I can create more modules.  To avoid using to much filament for these prints I suggest to use a 20% infill Lightning increasing the wall loops to 4 and the bottom shell layers to 5.

Vallejo / Citadel modular Paint rack

painting gear

FankoPRINT

Venomized spiderman head. The best headphone holder for lovers spiderman or venom! Print it, follow, like.

Venom/spiderman Headphone stand

Comics

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

Card Kits

Many24

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_k4g16gb27zyu.png"></figure>I really liked the idea of CouchConsole organizer, but wanted to put my Prusa Mini in use, so I designed 3D printable version.<h4>2 sizes depending on your printer / preference:</h4>Prusa Mini: 180mm (max bed size) - I used this modelPrusa i3 and similar: 210mm - not tested<blockquote>210mm version does not include the spacer (short insert cover) due to the size, so the short inserts are slightly longer to prevent movement.</blockquote><h4>Features:</h4>Long insert cover can be used as a phone stand and to hold your glasses, controller or remote:<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_k7y8na1bu10b.png"></figure>Spacer (180mm version only) used to devide the 2 small insert or as a cover for one of them:<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_w319tjsa659s.png"></figure>Inserts to store you snacks, chips, candy. Even in the 180mm version, the long insert can fit an Xbox Series controller<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_iqtqp2354ax5.png"></figure>0,2mm clearance on all the parts ensures good and tight fit without big movement.<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_6dhivtu3it99.png"></figure>Chamfered bottoms for the best printability.<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_4ur8eqmpu636.png"></figure><h4>Tips:</h4>Use ironing for top layers to have better looks.Use variable layer hight to reduce print time and increase details where it matters.<h4>Print instructions</h4><ul><li>I used PLA, but any material will do</li><li>Supports needed for “Cover” and “Cover_long”</li><li>Designed for 3 perimeters with 0,6mm nozzle</li></ul>

Snacker - Your Gaming / TV buddy

House Stuff

CharlesMcgee

This Universal Caliper Safety Case is designed to work with most 6in calipers.The simple design allows for easy modification and editing.Fits most print bed sizes, if not let me know and ill be sure to update it.&nbsp;DISCLAIMERthe tolerances on the latch are very precise and can vary from printer to printer, make sure your printer is well calibrated before printing!&nbsp;&nbsp;If you're anything like me, you always have some caliper nearby. Again if you're anything like me, you might be a little clumsy and drop your calipers measuring a tricky part or setting them down on a crowded desk only for them to get knocked off or things stacked on top of it.I created this case to prevent damage to those O so fragile calipers and their very particular measurements.&nbsp;If this model gets some love I will be uploading a tpu insert for the Case so there can be even more protection for your precious calipers.&nbsp;Assembly Instructions--------------------------Attach the latch to the top housing with some force. There are some cone shaped attachment points on both the latch and the top housing.&nbsp;Next push the left, followed by the right side back hinges together (or vice versa) same cone shaped hinges as for the latch.&nbsp;Print Settings----------------Print each part flat face down so you have the most surface area touching the build plate as possible&nbsp;The latch is designed to be printed vertically using a brim at the bottom for extra stability.I have integrated some 60 degree slopes for ease of printing.&nbsp;&nbsp;If you have any questions about the model make sure to let me know I always respond!<figure class="image image_resized" style="width:54.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/572266/2023-09-26_ksbx829ldy4b.gif"></figure>&nbsp;V.1.5Changed latching mechanism for better durability and ease of printing.

Universal Caliper Safety Case

Tools

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

Video Games

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

Printer Upgrades

Titan3DPrintingAU

3D modelled Black Panther Mask. Can be printed whole on the X1C, P1P and P1S. Also includes split up model incase you want to print it in parts. Please see the Raw files for the files to use

Black Panther Helmet

Marvel

TrendtB

UPDATE 13th December: A Christmas Angel version is also now available: <a target="_blank" href="https://makerworld.com/en/models/91216#profileId-97549" rel="nofollow noopener">https://makerworld.com/en/models/91216#profileId-97549</a>&nbsp;A charming Christmas decoration that can be displayed with, or without, an LED tealight candle!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/261711/2023-12-03_bd3f5c038459a.gif"><figcaption>Charming lighting for your home</figcaption></figure>&nbsp;Great for gifts, or for subtle decoration around your home. The example was printed in Bambu Lab PLA Matte White and looks fantastic even without the tea light.&nbsp;<h3> FEATURES</h3><ul><li>Fits any LED tealight up to 39mm diameter</li><li>Two part print for easy assembly</li><li>Multi-material compatible (Wireframe and outer edge are separate objects)</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/261711/2023-12-03_947a27edb315f.gif"><figcaption>Easy assembly</figcaption></figure>&nbsp;OTHER VERSIONS&nbsp;If you like this decoration, there is a Christmas Angel version available here: <a target="_blank" href="https://makerworld.com/en/models/81794#profileId-87041" rel="nofollow noopener">https://makerworld.com/en/models/81794#profileId-87041</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/261711/2023-12-13_f1288a2373a84.gif"><figcaption>Christmas Angel version available at <a target="_blank" href="https://makerworld.com/en/models/91216#profileId-97549" rel="nofollow noopener">https://makerworld.com/en/models/91216#profileId-97549</a></figcaption></figure><h3>PROFILE NOTES</h3>There are some challenging overhangs in this design, but it should print without supports. If you're tweaking things, be careful of adjusting speed - there are some very fine details in the wireframe and will likely fail at high speed.&nbsp;

Christmas Tree Tea Light Ornament

christmas

Howell

This is an optimized version of Mandalorian Helmet for people with slight bigger head or nose (like me :) )It is scaled 1,20% bigger and still mantain optimized supports.Print speed are 300 mm/s for all internal a slower for external, I suggest to turn off AUX fan or just put slow to avoid any kind of parts with different aesthetic results.Attached are file to print it in separate parts and optimized 3MF for the accessories (speed have been slowered down due to side parts fallen down when using creator profile).&nbsp;This is the way!&nbsp;FYI: PLA is from Azurefilm, Silk Graphite Grey&nbsp;&nbsp;Update 10/21/2023: Added Print profile for accessories

Mandalorian Helmet - Big size 

Star Wars

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

Cosplay

martin.taichl

This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has several features. - Retractable PDCs - Posable landing legs - Retractable Airlock cover - Extendable Air-bridge. - Attachable stand Model is once again a kit so you do not need a glue (with one exception described in the assembly video). I highly recommend to look at this video to know, how to assemble everything together: <figure class="media"><div data-oembed-url="https://youtu.be/M02tMysBd8A"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/M02tMysBd8A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Rocinante from the Expanse

The Expanse

This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand. The model is a kit and fits together without any glue whatsoever.For easier assembly, please take a look at the video series about the project: <a href="https://www.youtube.com/watch?v=bJCTO6jc__s&list=PLyHwaiEHdyZrLYG_-qljIfkuzycL5RODo" rel="nofollow">https://www.youtube.com/watch?v=bJCTO6jc\_\_s&list=PLyHwaiEHdyZrLYG\_-qljIfkuzycL5RODo</a>Notes: Te only part that needs supports are the cannons. Every other piece does not require any supports&nbsp;

The Destiny from Stargate

Models

Adam L

Change log:<ul><li>9/12/23: Added photos of my make, and uploaded a STEP version.</li><li>9/13/23 (midnight): Added a multi-part version and instructions. Requires glue, but you only need a black sharpie/paint and single-color printing instead of fancy multi-color printing.</li><li>9/13/23 (actual morning): Drastically improved and simplified instructions and model so that one multi-part model should serve everyone's needs. Updated STEP file too. This also will improve multi-color printing ease and final product significantly due to slicer glitches with the earlier model.</li><li>9/19/23: Smaller head version <a href="https://www.printables.com/model/586822-moopsy-the-cuddly-bone-vampire-from-star-trek-smal" rel="nofollow">now available here</a> for people who prefer this look.</li></ul><a href="https://memory-alpha.fandom.com/wiki/Moopsy" rel="nofollow">Moopsy was first seen in the episode “I Have No Bones Yet I Must Flee” of Star Trek: Lower Decks</a>, where it caused havoc in a galactic menagerie. Moopsy is one of the most terrifying aliens ever introduced in Star Trek, despite its cute appearance.I could not help myself by try to replicate this creature. I'm a total novice at Fusion360, but I tried my best to produce a faithful looking replica… with way too much effort. I actually think it looks pretty decent. Requires some supports, as shown.Printed here in 4-color PLA on my X1C to match the picture shown above from the show. You could probably just print it all one color though and paint it.<h5>Flavor text I made for this critter:</h5>Moopsy is a small, furry alien with big eyes and a round body. It looks harmless and adorable, but it has a hidden ability to launch itself at high speed towards its prey and sink its sharp teeth into them. Moopsy drains the bones of its victim, leaving behind a boneless sack of flesh. Moopsy is very hungry and will chase after any food source relentlessly. <h5>How To Print Multi-color (MMU/AMS):</h5><ul><li>Supports are needed. Sit him on the designed-in flat butt area, as shown.<ul><li>I designed it to minimize the amount of support needed. I used snug supports and PETG as an interface layer, but organic supports should work well here.</li></ul></li><li>0.2 mm layer height. At the top I used variable layer height to go down to 0.12 gradually to get a better top finish, but you can do as you like.</li><li>The color objects have been broken out. Here's my recommended coloring:<ul><li> <img src="https://media.printables.com/media/prints/580287/rich_content/2a01a18d-267a-4cdb-80aa-f56be408373e/image.png#%7B%22uuid%22%3A%22f926ab09-af90-4d2e-b5fc-7cfe6d6b7e62%22%2C%22w%22%3A1601%2C%22h%22%3A619%7D"></li></ul></li><li>If you can do 5 filaments at once, you can do some neat stuff. Here's my setup with in 4x PLA colors + PETG as PLA support interface with snug supports.<ul><li><img src="https://media.printables.com/media/prints/580287/rich_content/8003b796-275f-4b89-a6dd-eeed11ec2936/image.png#%7B%22uuid%22%3A%22b534ca7e-db7d-4374-8d04-68877fe9f4d5%22%2C%22w%22%3A1521%2C%22h%22%3A836%7D"></li></ul></li></ul><h5>How To Print Multi-color (one color at a time):</h5><ul><li>This version makes it easy even if you're bad at using a sharpie/paintbrush to get a good looking result… but you have to print little bits of colored plastic and glue them in place.</li><li>All the parts you need are in the same 3MF file. I suggest printing it so that the eye and mouth parts are part of the main body because the eye and mouth parts would be a little hard to get the fit in perfectly.. but you can try if you like! <ul><li>To accomplish this, delete the little eye bits and tounge from the model so you get a setup that looks like this. </li><li><img src="https://media.printables.com/media/prints/580287/rich_content/aebd9095-dca5-4535-91d0-53f0a92948da/image.png#%7B%22uuid%22%3A%228a9e0577-dd77-4b74-be73-36c3b8b40253%22%2C%22w%22%3A1047%2C%22h%22%3A292%7D"></li></ul></li><li>Print the setup above.<ul><li>Instructions above around orientation, supports and layer heights apply.</li><li>Color in the empty eyes and mouth with a black sharpie or black paint. The result should look like this, more or less:<ul><li><img src="https://media.printables.com/media/prints/580287/rich_content/e0d82a33-df5d-41e1-9ec2-56a74e8f5436/image.png#%7B%22uuid%22%3A%22012731f5-cc20-48e3-abfb-7801c93206ec%22%2C%22w%22%3A798%2C%22h%22%3A515%7D"></li></ul></li></ul></li><li>Now, using the thinnest layer height you can afford print 1x each of these tiny eye/mouth parts individually. They won't fit 100% perfectly to the curvature of the face, but they'll be really close… and if you want you could always warm them up a little with hot water and press them onto the face to get a good fit before gluing. <ul><li>Tounge (suggest in yellow)</li><li>LeftEyeHighlight (suggest in white)</li><li>RightEyeHighlight (suggest in white)</li><li>LeftEyeColor (suggest in blue)</li><li>RightEyeColor (suggest in blue)</li><li>These tiny little parts look like this:<ul><li><img src="https://media.printables.com/media/prints/580287/rich_content/9f5350d5-f07d-4504-bbf3-90334cd93671/image.png#%7B%22uuid%22%3A%220000a5fd-d4c5-449e-b75f-622bc2130c5c%22%2C%22w%22%3A600%2C%22h%22%3A457%7D"></li></ul></li></ul></li><li>Once printed, glue these in place as shown on top of the black-eyed base to end up with the composite product.</li></ul><h5>How To Print (Single Color):</h5><ul><li>This version is ideal for people who are good with a paintbrush and can color in little details with precision.</li><li>Instructions above around supports and layer heights apply.</li><li>Print the combined 3mf file in one color.</li><li>Paint or use sharpies if desired to add color.</li></ul>