ericmg123

CoolBeans

Perfect for any gathering, I have created decorative tags that clip onto your glass allowing for easy identification - no more mistaking which glass is yours!&nbsp;I have created two sizes, with inner diameters 25mm and 15mm based on which wine glass you have. Attached is each tag individually but also a file with the full set of tags in each size. If you require more than six, just customise by changing the colour you print in. The .3mf files are sliced such that the top layers have a colour change, adding detail to the present, cake and bonbon.&nbsp;If you have any other ideas, let me know! Happy partying!

Decorative Glass Identification Tags (New Years theme)

general purpose

TomoDesigns

Introducing the Jumpy Christmas Tree, a 3D printable toy that brings a touch of nature's magic to your playtime. Watch in delight as this playful companion jumps back up when you gently push it down. The brother of this <a target="_blank" href="https://makerworld.com/en/models/72754#profileId-77309" rel="nofollow noopener">Christmas Tree</a>&nbsp;He is a 2 part Tree that you can print without any supports. It is a snap-fit. Filaments used: <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=3991419&m=138211&urllink=&afftrack=" rel="nofollow noopener">Bambu Lab PLA Basic Green, Red, Yellow.</a>&nbsp;Every make will be featured on my Instagram if you add your handle and follow me :) Check out <a target="_blank" href="https://www.instagram.com/tomo_designs/" rel="nofollow noopener">my Instagram</a> if you want to see more designs like this or if you have questions!&nbsp;Do you want to support me or become a reseller of my designs? Go take a look at my <a target="_blank" href="https://www.patreon.com/TomoDesigns" rel="nofollow noopener">Patreon!</a><figure class="image image_resized" style="width:41.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/227806/2023-12-02_f46a66d55f579.gif"></figure>

Jumpy Christmas Tree

toys/games

MihaiDesigns

3D printed AMS stacking stand. Fits the Bambu Lab AMS (for P1P and X1 series 3D printers)<a href="https://www.youtube.com/shorts/__9SEiFJhKI" rel="nofollow">Quick presentation video</a><h3>Compatibility</h3>Fits the 3 different versions of the AMS units. However, the fit for the older version (3 large gaps on the sides instead of 4) is slightly offset and the bottom box will protrude out a bit.<h3>Materials</h3><ul><li>about 500g of filament</li><li>optional 10x404mm metal rod/pipe (such as an aluminum pipe) cost me about $2 at the hardware store</li><li>optional two M3 grub screws 6-12mm long and compatible Allen (hex) key (you can find them in sets on Amazon for $10-20), OR use long normal M3 screws, like M3x30 or M3x40 and only screw in a quarter of the length</li><li>optional felt pads for the bottom AMS unit for easier sliding</li></ul><h3>Printing</h3>There's an optional small test-fit part (plate 3) that can be printed first for checking potential fitting issues.Pick either the decorated version (plate 1) or the plain version (plate 2). Takes close to 15 hours to print with the Generic PETG profile. <h3>Assembly</h3>Cut the metal rod to 404mm long, then insert it in both printed parts. Fit the AMS unit at the top. Screw in the two grub screws at the back alongside the rod to lock it in place. If you like CAD modeling, I posted a<a href="https://youtu.be/lQgtJk67J3Q" rel="nofollow"> 90-minute video with the entire workflow for creating this model</a>.

AMS stacking stand for P1P and X1

printer accessories

JamesThePrinter

<h3>*Edit 10/8/23 - Non-AMS Version now available!</h3>This haunted house opens up to allow the addition of an LED tea light candle. &nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print Settings & AssemblyThe roof requires a very small amount of supports.&nbsp;AMS VersionHouse Facade is a 3MF with 2 separate parts. For it to work properly, the windows need to be changed to white or transparent. Once printed, the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.&nbsp;Non-AMS VersionThe windows need to be printed separately. Once printed, the windows need to be glued to the back of the facade. Then the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top. <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Designed with Fusion360&nbsp;The filaments used in the pictures above: <ul><li>Bambu Lab Matte Charcoal PLA</li><li>GIANTARM Transparent PLA</li></ul>

general purpose

toys/games

printer accessories

art / decor