eric.guindon

TerTerro

Modular Outpost Terrain Can be mix and matched. Is designed for 28-32mm scale miniatures, just scale how you need it. Windows and doors are exchangeable, no supports needed.

Modular Outpost Terrain

terrain

HG_Design

Easter surprise eggsEaster eggs to put surprises inside.Designed 80mm high to be printed in two parts.Hope you like it.

Easter surprise eggs

easter

Bunk.Wire

Ying yangd hueforgeNo background! created with filament painting technique using hueforge software.&nbsp;Remember if you want to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal PLA BambuLab Basic Beige PLA BambuLab Matte Ivory WhiteSwap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually Start with Charcoal At layer #7 (0.64mm) swap to Beige At layer #15 (1.28mm) swap to Ivory White for the restRun out of beige do had to use Brown prefoamed pla&nbsp;

Yin yang hueforge 

Valentine's 

davidkelly021

Christmas snowball town holes modelled to allow micro led string lights to be inserted into the house of the town, space in the base of the model for a battery pack

Christmas snow ball town

Christmas 

sauder420

You'll need to clip the. Support on the camel's Tail that connects to the leg. There is a small support underneath the sheep. You will need to Cut off the supports for the stars at the top.

Nativity Globe

Kathryn 

YelTrik Designs - Click FOLLOW

Rim Clip! - Secure BL filament without bending it through those holes! Fits securely on the rim of the spool and is simple to adjust the location on the rim to secure your filament. &nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/51352#profileId-53141" rel="nofollow noopener">Mini Rim Clip</a> and <a target="_blank" href="https://makerworld.com/en/models/61852#profileId-64275" rel="nofollow noopener">Mini Rim Clip Version 2</a>! Print all three and decide which is best for you!

Bambu Filament Rim Clip

practical 

moritzb57

Lord of the Rings "Doors of Durin with Gandalf" 2D silhouette wall art decor

LOTR Doors of Durin w Gandalf Wall Art Decor

decor

DrKriegerAUS

Update 27/01/2024:My last set of models for a while - some straight stackable ramps:<a target="_blank" href="https://makerworld.com/en/models/158553" rel="nofollow noopener">https://makerworld.com/en/models/158553</a> These can be printed instead of the original ‘curved’ ramps if you want your ramps to stack&nbsp;Update 26/01/2024:After extensive play testing, my son dropped a few suggestions into the suggestion box for me. I've added some new parts to the ‘starter pack’.<ol><li> A ‘bumpy road’ piece which either sits on the ground, or across two support pieces. This is now found on plate 8.</li><li>A ‘pin’ (m) version of the straight stackable ramp. The original only had a socket. Plate 6 used to have two ramps with sockets, now it has one with a pin and one with a socket</li><li>A ‘joiner’ piece which is only 10mm high but is stackable. This piece can be used to put other blocks at a custom height, or to help lock everything in place for kids who want a ‘gap’ to jump but don't want the ramps sliding around. I've put two on plate 9. </li></ol>Check out the last few photos for examples. &nbsp;Update 16/01/2024: New parts available:Crushed Cars - <a target="_blank" href="https://makerworld.com/en/models/141716" rel="nofollow noopener">https://makerworld.com/en/models/141716</a>Shipping Container Backflip Ramp - <a target="_blank" href="https://makerworld.com/en/models/141874" rel="nofollow noopener">https://makerworld.com/en/models/141874</a>Oil Drums to Smash - <a target="_blank" href="https://makerworld.com/en/models/141931" rel="nofollow noopener">https://makerworld.com/en/models/141931</a>These are on their own pages so I can attribute models I've ‘remixed’ correctly. &nbsp;Your little one (or you, I won't judge) can now build their own Hot Wheels Monster Truck Stadium!Simple model but a lot of fun for little hands. The pieces interlock loosely and in may combinations for hours of fun!I printed in PLA3 layers top bottom and side15% Rectilinear infill (it seems to give a nice smooth finish on the ramps)The square support with holes can be printed with lightning infill to save a lot of time and filament, as the through holes give the top plenty of support, but I recommend at least 4 bottom layers if you choose to do this.

Hot Wheels Monster Truck Ramp Starter Set

wesley

Preischl 3D

Do you like my designs? I would be happy if you would support me by joining my Printables club! :) (already from 3$) It also gives you access to exclusive models ;) https://www.printables.com/@Preischl3D Or do you want a sales licence? Then you can book the commercial tier!&nbsp;Again, to clarify: The inner ring cannot be turned! The outer ring can be removed for this purpose!This is exactly what is intended and part of the design project! (read below)&nbsp;All models I publish are tested by me and my community before I publish them.I regularly practise 3D design on various tasks. This time it was the geometry of rings that are printed inside each other. It is exciting that all rings have the same curvature and yet behave differently depending on their size. While the inner ring can hardly be moved, the outer one can be removed if you want.Very exciting to understand geometry and of course to play around with when you are bored. :)The tollerance between the rings is 0.25mm which should be feasible on almost any 3D printer.

Fidget Rings print in place

cool

kevjduffy

Insert for the boardgame Age of Innovation. Allows for quick set up and safe storage.&nbsp;For this insert, print the following:<ul><li>1 x AOI Books</li><li>2 x AOI AOI coins_toolsx2</li><li>1 x AOI Hex TilesLARGER</li><li>1 x AOI Player aidsLARGER</li><li>5 x AOI Player Piecesx5LARGER</li><li>2 x AOI Player Pieces x2 LARGER</li><li>3 x AOI Racesx3LARGER</li><li>1 x AOI power_covers_small</li><li>1 x AOI White piecesLARGER</li><li>1 x AOI_SpacerLARGER</li><li>2 x AOI Landscape_x2</li><li>1 x AOI Tokensv2</li><li>1 x AOI_Solo</li></ul>