enrikef87

thedecember87

Modular phone holder for all phone in commerce, FULL printable and full customizable, see the instructions&nbsp;instruction:1: screw a modules on a base based on how many you have printed or want<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_cdc50f1291845.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_1d337e044a65.jpg">2: insert the final module inside the phone holder plate as in the photo<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_daef035f8042e.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_232ed14c161c7.jpg">3 insert the screw that passes through both the plate and the final module as in the photo<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_56fb86cfdf658.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_611cebf756174.jpg">4: screw the final nut into the thread at the end of the screw as in the photo<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_5791645b72fc7.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_e7932139815e1.jpg">5: screw everything to the module previously placed on the base<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_eabb30d74e8a6.jpg">6: END<img src="https://makerworld.bblmw.com/makerworld/draft/510995/2024-02-08_f236f4dea1806.jpg">&nbsp;&nbsp;

Modular phone holder full printable/NO AMS NEED 

Phone stand

Marc Elbichon

After a lot of work, here is my Ultimate T-Handle Torx Key set, designed in 8 common sizes (T10, T15, T20, T25, T30, T40, T45 and T50)&nbsp;<ul><li>Stand available here : <a target="_blank" href="https://makerworld.com/en/models/78304" rel="nofollow noopener">https://makerworld.com/en/models/78304</a></li><li>Other T-Handle Sets : <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/801642" rel="nofollow noopener">https://makerworld.com/en/u/3864875302/collections/801642</a></li></ul>&nbsp;Print in place, no glue required, handles knurling gives a nice feeling in the hand.&nbsp;It's made to be tight, to avoid the key to move, it should be easy to assemble, but if it is a little hard to screw (example with coated keys, which is a little bigger), a drop of grease or oil on the thread could help.&nbsp;There is 2 handle sizes : One small for allen key from T10 to T25 and a large for T30 to T50&nbsp;Give your feedback and post your makes, enjoy!&nbsp;PS : Feel free to ask other sizes

Ultimate T-Handle Torx Key Set

tools

Fresh3Design

Storage Rack for 5x5 Gridfinity base plates. Can hold 4 plates (100 boxes total).&nbsp;-PETG or stronger recommended.-Print x2 of each braces, lay on side for strength.-Print x1 of each side panels.

5x5 Gridfinity 4 Tray Storage Rack

Gridfinity

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

P1S and X1

Leon Fisher-Skipper

<h2>This Feature got implemented for P1 and X1  Bambu Studio 1.9. Please update your slicer and use Bambus version, as you can easily adapt the retraction length and turn the feature on and off as you please. A1 and A1 mini still have to use the download here.  </h2><h2>Description:</h2>TLDR: This mod allows you to use a lower flush multiplier without the color bleed that it would have with the default profile. &nbsp;Great <a target="_blank" href="https://youtu.be/suFbfer1WhI?si=7mcjxLNhubW9WR1a" rel="nofollow noopener">video</a> by butter pocket prints explaining this change.&nbsp;<h2>How to use it:</h2><ol><li>Open the 3mf file and save the Nozzle Profiles of your Printer to your User Presets. It will tell you that the G-Code was changed, confirm with OK, as this is exactly how the profile works. The profile name has to be changed to save it.  </li><li>Now you need to adjust your purge settings! I would just set the multiplier to 0.5 on P1 and X1 and 0.65 on A1 and A1 mini. The values may now show red in the purge settings, but they will still work. </li></ol>!Dont use with Silk PLA!  !Confirm that you are running the newest Version of Bambu Slicer. Orca Slicer may work but is not tested!&nbsp;&nbsp;&nbsp;&nbsp;Original Post from 14.09.2023 on Printables with the title “bambulab profile for up to 60% purge reduction” which has sadly since been deleted by prusa:&nbsp;&nbsp;<h2>Orginal Description:</h2>The biggest issue with The Bambulab printers is that during multicolor printing ridiculous amounts of purge (dubbed poop by some) are generated, when switching colors.(Example: <a target="_blank" href="https://reddit.com/r/BambuLab/s/iMiT0Bis6i" rel="nofollow noopener">https://reddit.com/r/BambuLab/s/iMiT0Bis6i</a> or <a target="_blank" href="https://reddit.com/r/BambuLab/s/wDpB3A3N6k" rel="nofollow noopener">https://reddit.com/r/BambuLab/s/wDpB3A3N6k</a>)This has to be done to clear the Printhead of the old color and replace it with the new color.The Print head has a internal volume bellow the cutter of 110 mm3, meaning that at least 110 mm3 of filament has to be flushed and an additional amount to account for the transition when the old color mixes into the new color.Of these 110 mm3 in the hot end, only half get melted, as the rest stays in the cold part around the heat sink.Here comes a neat trick I found: Before cutting, the unmelted part can get pulled up so that it can be fed back into the AMS. When the new filament is feed into the hotend, it gets pushed in an additional 20mm.This means that for every filament change 50mm3 of filament is saved.As a result much less purge volume is required.When the print ends, the filament also gets pushed out 20 mm, to also save filament here.The filament gets pushed out another 20mm during purging when starting the print too, to account for the push-back when the print ends.   The saving results can be seen in the first picture.I used this model (<a target="_blank" href="https://www.printables.com/model/536401-bambu-lab-ams-purging-strips-p1p/files" rel="nofollow noopener">https://www.printables.com/model/536401-bambu-lab-ams-purging-strips-p1p/files </a>) by Joey_466945 and printed it once with the „Save filament Profile“ and once with the normal on. The flush Volumes have to be set to 0 for this test! Each line on the strips corresponds to 100 mm3. It’s clearly visible that each transition is shifted by 50mm3.For advantageous color combinations like blue and red these 50mm3 savings correspond to a very high saving percentage. Combinations which have a lot of color bleed like white to black need a lot of purging still, so the percentage saved is much less.I printed two benchies for comparison (the left one is the saving Profil) and the quality stayed the same, despite the flush volumes being reduced by 50mm3. The benchy with my profile generated 60% less purge.Both prints used a prime tower though which stayed the same size.  The Profile only changes 8 lines of code in the G-Code.I tested thousands of filament changes and had no issues. Tests have been done on X1C, P1P, P1S and A1 mini. Edit: Silk PLA and Bambu support material should not be used with this profile. Tests by Bambulab indicate problems.   &nbsp;&nbsp;&nbsp;—————————————————————————————————————————————————UPDATE 01.02.2024: I made a mistake with the A1 and A1 mini profiles. Retraction was now lowered and should improve reliability. Max. savings with A1 and A1 mini is now 33% and the net savings per filament change is 36 mm3. P1 and X1 still have a max saving of 45% and a net saving of 50 mm3. This is due to the changed geometry of the hotend, because the hot zone is a bit longer. This reduction is more on the conservative side, it is probably possible to get away with more savings, but I can’t test it yet as I don’t have a A1 or mini. &nbsp;UPDATE 25.01.2024: Bambulab updated the A1 and A1 mini print profiles, so I also updated them to the current version.I have also heard back from Bambulab and they are testing the feature. They have run into problems with Silk PLA though, so it seems it works not with all filaments perfectly. <a target="_blank" href="https://makerworld.com/en/u/1929892454" rel="nofollow noopener">@EyemJoe</a> also mentioned problems with Support filament. If you use these two filaments be careful. &nbsp;UPDATE 11.01.2024: I changed the start G-Code as on some printers the Load Line was incomplete on some printers.Thanks to <a target="_blank" href="https://www.printables.com/@Cosquilla_523214" rel="nofollow noopener">@Cosquilla_523214</a> for pointing me to the issues and suggesting a fix. I also changed the title, as the calculated maximum saving is 45% for this method and not 60% as the title stated before. The 60% was what I observed on my testprint, but this was with a small quality reduction. 45% is without a quality reduction. &nbsp;I have also found out that Bill from 3D chameleon also was using retractions to reduce waste on the Bambu Printers a couple of months before me. I independently came up with this, but his hardware based solution is also very interesting. The big difference is, that my profile doesn’t require any hardware changes. If you are interested in multi color printing, his Chameleon is very interesting and was one of the smartest and best solutions before the Bambu AMS. It also makes Multi-color printing possible on any printer. If you are interested visit his <a target="_blank" href="https://www.3dchameleon.com/" rel="nofollow noopener">Website</a>, where he will also soon launch the MK4 version. &nbsp;UPDATE 18.12.2023: Now Profiles for all Bambu Printers and all Nozzles including A1, A1 mini and X1E.Thanks for @rc2k7_1528233, @Sven and @AustinWolt_1104655 for testing the A1 mini Profile.@AustinWolt_1104655 also made a <a target="_blank" href="https://www.youtube.com/watch?v=VLgqqTbFd3k" rel="nofollow noopener">Video</a> explaining how to use the Profiles.&nbsp;UPDATE 12.12.2023: I added profiles for all nozzle sizes and Printers including the P1P, P1S, X1C and one experimental profile for the A1 mini.All the profiles are saved in the same file. Save those you need to your User Presets.I also slightly updated the documentation in the code to make it more clear.&nbsp;UPDATE 20.09.2023: G-Code was modified so that the calculated amounts of waste from Bambu Studio are accurate. Before there was a small discrepancy.I also wrote the G-Code down below with instructions how to use the settings without the download.—————————————————————————————————————————————————  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;To use the changes without the download do the following:To use these changes go into Printer Profil and select one of the Profiles you want to change. If you dont use any custom profiles, just use the standard, in my case “Bambu Lab X1 Carbon 0.4 Nozzle” for the 0.4 Nozzle. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000091241/design/63485d3f-933c-4abc-8283-a9125362f931.webp">Then go into “Machine G-Code” and edit the G-Code in 3 of the text fields like described below. Save the changes afterwards.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000091241/design/cbd86d0a-eac5-47e9-a52a-960c6a8dd46d.webp">&nbsp;Changes to the g-code are marked bold in the PDF documentation.

Reduce purge by up to 45%.

JimmiboY - Youtube

Back with version 2 of the storage box system for ikea skadis. as you might have seen my first version that was stackable. this version fits side ways, and are stack able. and they come in diffrent sizes. Look for my other designs.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sCkYCk8ipaI?si=LPSb8c1VUgzuQoWe"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sCkYCk8ipaI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sCkYCk8ipaI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Ikea skadis Singlebox V2

Ikea

ConTra

Sakura 240 - Racing rear wing - 3DSets

Sakura 240 - Racing rear wing - 3DSets

Model 17: Sakura 240

MrGnarly

Remix includes updated model fixes for easier printing and consistency.&nbsp;All credit goes to the author below&nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:2846113" rel="nofollow noopener">Yoshi from Mario games - Multi-color by bpitanga - Thingiverse</a>&nbsp;

Yoshi from Super Mario

Figures

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

franceschellifederico

Description:This 3D-printable cable organizer is designed to keep your workspace tidy and your cables neatly organized. With its sleek and functional design, it accommodates various cable sizes, ensuring a clutter-free environment. Whether it's for your desk, entertainment center, or workspace, this organizer offers versatility and practicality. Its user-friendly design allows for easy printing and assembly, making it an ideal solution for managing multiple cables effortlessly. Embrace a clutter-free setup with this customizable cable organizer!&nbsp;Features:<ul><li>Versatile design fits various cable sizes</li><li>Sleek and functional for any workspace</li><li>Easy to print</li></ul><a target="_blank" href="https://makerworld.com/en/models/134271#profileId-145744" rel="nofollow noopener">Check out my new model: HERE </a> <a target="_blank" href="https://makerworld.com/en/models/134271#profileId-145744" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/388105/2024-01-11_6fed0b403a995.png"></a>

Cable Organizer v2

cable storage

Nacho1741

Whipped up a simple filament rack using ½" SCH 40 PVC I had laying around. Simply print and tap the PVC into the rack bases and tap together the riser sections.

Modular Filament Rack 

3D print Filament storage

OlleMark

Updates:2023-12-19 - Made the allen keys easier to remove2023-12-22 - Added space for the PTFE comb and added space for the A1 standard nozzle wiper.2023-12-25 - Added more labelbodys for the a1 standard.2023-12-28 - Added slightly more space for the A1 standard nozzle wiper..Introducing my small accessory box for the a1 series that fits all of the a1 accessories with a lid that locks in place. A bunch of different labels have been provided to fit your needs. :).Designed to be as compact as possible and with a similar lid deisgn as my other accessory boxes you can just slide the lid on the underside when the box is in use and then put it back when the box is being stowed away. The lid has a new locking mechanism i have been working on and can easely be released by pressing both of the release “buttons” on each side..I have provided a blank lid and label if that is your preference :).I printed the lid and label with 1mm top and bottom thickness to avoid any infill and the bottom of the box is printed with 0.6mm bottom thickness and 1mm top thickness with 15% gyroid infill. Everything else is stock bambulabs settings.