eliasmuenz

Eldenroot

Muzzle thread reduction from 24mm+ to 14mm- … so you can use standard silencers and other accessories. Only for airsoft use. Compatible with Silverback SRS and TAC-41 (and others).&nbsp;Printing:<ul><li>PLA/PETG (recommended)</li><li>no support</li><li>20% infill, gyroid</li><li>0,12 mm layer height</li><li>0,40 nozzle size</li></ul>

Muzzle thread adapter (24mm+ to 14mm-) for Silverback

Airsoft

Alexis_

<h3>Japanese Torii</h3>&nbsp;90mm x 120mm x 7mmthe small panel is held together with double-sided tape&nbsp;Files :<ul><li>Japanese_Torii_Top.stl</li><li>Japanese_Torii_Middle.stl</li><li>Japanese_Torii_Foot.stl (To plant or to place)</li><li>Japanese_Torii_Panel.stl (Optional)</li></ul>&nbsp;Print Settings :Supports: NoResolution: 0.12 mmInfill: 15%&nbsp;

Japanese Torii

Bonsai

Little Mac Designs

This 3d Printed Happy Succulent Planter is perfect for sitting on your desk to bring a smile to your face every time you look at it!

Happy Pot - Mini Succulent Planter

pflanzen 

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Pokémon 

gare-sb

Bosch Logo LEDPrinted with AMSI made 2 versions, 1 for an LED strip, 1 for 9V operation with on off switches

Bosch LED

Lightbox

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like this model:<a target="_blank" href="https://makerworld.com/en/models/135018" rel="nofollow noopener">https://makerworld.com/en/models/135018</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/vitim" rel="nofollow noopener">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

Werkzeug 

3Dprint-K81

<figure class="image image_resized" style="width:57.43%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000137421/design/2024-04-28_28d9d1624c6ed.gif"></figure>Check my Profile for more fun games:<a target="_blank" href="https://makerworld.com/en/models/159381#profileId-174976" rel="nofollow noopener">TicTacToe Evolution by 3Dprint-K81 - MakerWorld</a><a target="_blank" href="https://makerworld.com/en/models/137411#profileId-149529" rel="nofollow noopener">Labyrinth mini game by 3Dprint-K81 - MakerWorld</a>&nbsp;Do you want to have fun with friends? All you have to do is print out this impossible puzzle.&nbsp;Challenge your friends, it will be guaranteed fun, don&#39;t miss the opportunity to shoot a basket, it will be guaranteed fun.&nbsp;You can choose to print it in two ways, easy or multicolor:&nbsp;<ol><li>multicolor (see image)</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000137421/design/2024-01-11_3ac59c2b13672.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;2. with logo bambulab (see image)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000137421/design/2024-01-08_a01555a7c7d2b.png"></figure>3. one color (see image)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000137421/design/2024-01-08_87be3c51e1bca.png"></figure>&nbsp;You just need a little string to tie the ball, to easily retrieve it with each shot.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000137421/design/2024-01-08_c027d2a726623.gif"></figure> Have a good match and may the best win.&nbsp; Happy printing, I ask you to leave your feedback, thank you!!!!

Basketball mini game

spiele

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

gedöns

bazwolff

This is a multipart version can can be printed more easily but also bigger.You print the Base, Statue, Flames and the Crown separately and glue them together afterwards. The crown can also be easily be repaired with the separate file.&nbsp;Both the STL and the 3mf files are included. &nbsp;I have printed with the following materials:<ul><li>Base - Marble PLA</li><li>Statue - Silk Rainbow PLA</li><li>Crown - Silk Rainbow PLA</li><li>Flame - Silk Gold PLA</li></ul>Printed at 0.2 layer height and 3 layers perimeter and lightning infill&nbsp;

Statue of Liberty Multipart print

Figuren 

VRsculpts

Horf horf horf! Murry Chorstmus! ***A-1 Mini users: Download the presliced separate gcode 3mf file and save to your SD card to hear a custom tune once the print finishes!***&nbsp;This wacky Santa with Rudolf will put you in the holiday spirit! Prints in place with only a support added under the reindeer's head. If using 1 AMS or printing on A1 mini, a layer pause placed at the top of the sleigh (layer 305 if using my print profile) is required so that you can swap the yellow from the sleigh with skin tone filament that is used for Santa's face and Rudolph's antlers. Remove from buildplate and wiggle Rudolph's legs so that they can dangle when picked up.&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts&nbsp;

Santa Sleigh with dangly legs Rudolf

Weihnachten 

Longracks Labs

Mashup of Dry Pods and Desiccant tray models for using desiccant beads in AMS.&nbsp;v2 in Raw Model download includes update includes:<ul><li>Plate with DryPods (0 degree offset), and trays (same as v1)</li><li>Plate with DryPod at 30 degree offset</li><li>Plate with ‘skinny’ DryPods as needed (with AMS wear preventer, etc.)  </li></ul>Drop a Boost if you are happy with this print!