eddyz1122

P1S BSMT

Storage Slots to be mounted under shelf. Allows storage for multiple Types of Wrap, Foil and Paper used for cooking and food storage. Split into 2 files. &nbsp;2 Slots fits cling wrap boxes 3 Slots is slightly smaller and fights wax paper and parchment paper boxes&nbsp;Mine holds Cling Wrap, Wax Paper, Parchment Paper and Foil

Kitchen Storage for Cling Wrap and Foil

Kitchen

elikoll

Here is my clean way to organize my cables messed up.The organizer clips together perfectly.I stuck it under the table with double-sided tape.

Clean Cable Management Organizer Clip

cable management 

IXPatch

This is a flexible, articulated Mega Charizard X. It can stand on its feet and has a flexible neck, tail and wings.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Mega Charizard X - Flexi Articulated Pokémon

Pokémon 

星骸造物-StarK

SH-02《降临行者》外装甲  Arrival Walker-SH-02

articulated figure 

Henryb2015

I wanted to display my funko's out of the box but also wanted to keep the box with them This is what I came up with. I did make it a little larger than needed so it would fix the box with or without a protector on it. If you want it to fit your box snug, you will need to resize a small amount. I think it looks great as it is. You can see in the pictures it's not too big.

Funko out of box shelf

funko

ST3V3DDRUCK

Needs to be mounted with double-sided tape (or something like UHU Patafix) because i didn´t want to drill holes into my bath tiles

Bathtub Corner Shelf Voronoi

home 

Boink

remix of <a target="_blank" href="https://www.printables.com/model/47025-voronoi-vase" rel="nofollow noopener">https://www.printables.com/model/47025-voronoi-vase</a> with AMS option and prebuilt support&nbsp;2 options:<ul><li>Full vase made in one piece (so far best results and no issues) I recommend using rainbow filament to see beautiful transition.</li><li>Split model which will need to print at low speed and part fan on to cool the filament quickly. I had initial fails but was able to correct them by slowing down a lot.</li></ul>

Voronoi Vase

gift ideas

ZipZapPrint

Embrace the celestial charm with Stitch on Crescent Moon, a whimsical 3D model featuring Stitch seated on a crescent moon under a starry sky. This enchanting creation captures the playful and adorable essence of Stitch from Lilo & Stitch. Print and display Stitch on Crescent Moon to add a touch of intergalactic cuteness to your collection.&nbsp;Adoptez le charme céleste avec Stitch on Crescent Moon, un modèle 3D fantaisiste mettant en vedette Stitch assis sur un croissant de lune sous un ciel étoilé. Cette création enchantée capture l'esprit ludique et adorable de Stitch de Lilo & Stitch. Imprimez et exposez Stitch on Crescent Moon pour ajouter une touche de mignonnerie intergalactique à votre collection.

Stitch on Crescent Moon

picks

Muskoka Research

<div><h1>Summary</h1><div>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLEAdditional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stlAssembly (See Pictures):<ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"> Duramic PLA+ / TPU </a><pre><code> Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

Tools 

PupaePrint

<h4>Summary</h4>Stable support for the vaporizer during loading, charging or vapingSymmetric - Fits both ways<h4>Print Settings</h4><ul><li>Printer brand:</li></ul>BAMBU<ul><li>Printer:</li></ul>X1 CARBON<ul><li>Rafts:</li></ul>No<ul><li>Supports:</li></ul>No<ul><li>Resolution:</li></ul>0.20<ul><li>Infill:</li></ul>15%<ul><li>Filament brand:</li></ul>any<ul><li>Filament color:</li></ul>any<ul><li>Filament material:</li></ul>PLA<ul><li>Notes:</li></ul>Slicing 0.12mmrnPerimeter shells: 4rnTop/bottom shells: 3rnSpeed 50/70mm/srnTemp 220'CrnrnThe above settings gives me a nice tight fit so the stand hangs on to the vaporizer when lifting it from the table.rnrnIf you want even tighter fit, try to scale down slightly (to maybe 99%). If you want it looser, scale it up.rn

MIGHTY STORZ AND BICKEL STAND REFORMATTED

vape

Valeria Momo

The most kawaii &amp; funniest Pokémon you&#39;ve ever seen! Print it in one color, paint it or print in multi-color version🔥! Check my other models (<a target="_blank" href="https://makerworld.com/en/models/404180#profileId-305879" rel="nofollow noopener">pikachu</a>, <a target="_blank" href="https://makerworld.com/en/models/404180#profileId-305879" rel="nofollow noopener">bulbasaur</a>, <a target="_blank" href="https://makerworld.com/en/models/404180#profileId-305879" rel="nofollow noopener">charmander</a>, <a target="_blank" href="https://makerworld.com/en/models/404180#profileId-305879" rel="nofollow noopener">squirtle</a>, <a target="_blank" href="https://makerworld.com/en/models/427899" rel="nofollow noopener">eevee</a>, <a target="_blank" href="https://makerworld.com/en/models/427891" rel="nofollow noopener">psyduck</a>, ..)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438304/design/2023-11-19_c8d27404379f3.png"></figure><h2>Print settings &amp; post-print suggestions</h2>Brim is enabled but if you have excellent adhesion to the print bed, you can disable it. If you decide to keep it enabled, you will have to remove the brim after printing: I use this <a target="_blank" href="https://it.aliexpress.com/item/1005006552474389.html?spm=a2g0o.productlist.main.35.d6f1hLY6hLY6Jp&amp;algo_pvid=5cf3b9ee-a052-40c3-b2f9-6e46738c3fda&amp;aem_p4p_detail=202403220612465209195050748030000902062&amp;algo_exp_id=5cf3b9ee-a052-40c3-b2f9-6e46738c3fda-17&amp;pdp_npi=4%40dis%21EUR%219.48%210.46%21%21%2172.74%213.55%21%40211b600217111131663054582e5f0d%2112000037648909320%21sea%21IT%210%21AB&amp;curPageLogUid=6cJ90mwikRgO&amp;utparam-url=scene%3Asearch%7Cquery_from%3A&amp;search_p4p_id=202403220612465209195050748030000902062_18" rel="nofollow noopener">tool </a>which makes the task easier and precise. If you notice the object becoming discolored where the brim was present, a brief burst from a hair dryer or heat gun can help re-melt the filament just enough to restore its original color. Be careful not to overheat, as this can cause the strands to melt together, resulting in a messy outcome.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438304/design/2023-11-19_c8d27404379f3.png"></figure><h2>Commercial license</h2>Do you want to sell prints of my models? You can purchase commercial licensing <a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener">by joining the Commercial License in my Patreon</a>.

Silly Pokémon Charizard Blastoise Venosaur (4pcs)

toys

Nice little display made for ultrapro one touch cases. No premade holes I used a countersink bit to add mine.

Pokemon UltraPro 9 card display

Cards

gustav.ferdman

If you liked this model check out my other ones. Also follow me to keep updated when I post new models, which  I do regularly.&nbsp;Update 24/4 - 2024: I have updated the print profile the that the small thread on the top should print more easily.&nbsp;A drip waterer using a standard PET-bottle as water reservoir. The amount of watering can be altered by turning the knob.&nbsp;We&#39;ve all seen the PET-bottle plant waterer&#39;s. However, this one is adjustable for the current needs of the plant instead of just keeping the entire soil wet at all times. With a small threaded knob on the side of the device the amount of water dripping out of the device can be controlled and also aimed directly at the plant so that no water is wasted, hence it will last longer between refills and work even for plants that like dry spoil, like cactuses.&nbsp;Assembly and usage:<ol><li>Insert the part called tap (small part with 3 connections) into the part called base (large part), this will take some force but is necessary for a tight seal. Look at the pictures if needed.</li><li>Take the pin (the small pointy thingy) and screw it on the tap.</li><li>Fill up a water bottle and attach your new print to it.</li><li>Stick the large pointy thing straight down into the soil and make sure it doesn&#39;t fall over by itself.</li><li>Turn the small knob until the desired amount of water drips out of the tap.</li></ol>Check out my other models if you liked this model, how about hydroponic growing baskets?<a target="_blank" href="https://makerworld.com/en/models/424718#profileId-328151" rel="nofollow noopener">https://makerworld.com/en/models/424718#profileId-328151</a>&nbsp;Please drop a like and don&#39;t forget to upload your makes!&nbsp;Update 17/4 - 2024: Added step files on the request of <a target="_blank" href="https://makerworld.com/en/@s.tochahi" rel="nofollow noopener">s.tochahi</a>.