edchen314

lego

Cubic Garden

A reworked combo including matching coasters is here!配上龍紋杯墊的新版本 : <a target="_blank" href="https://makerworld.com/en/models/130439" rel="nofollow noopener">https://makerworld.com/en/models/130439</a>&nbsp;新年龍紋全盒New Year Dragon Carve Snack Box&nbsp;In Chinese New Year, people always serve the guests different snacks - candies, nuts, dried seeds and fruits when they come for a visit in a ‘Box of Wholeness’ (全盒)&nbsp;Therefore I created this snack box with retro dragon carve style for CNY. It is gonna impress the guest!I have another version of the snack box in a non-Chinese New Year style, check it out andplease download from (<a target="_blank" href="https://makerworld.com/en/models/123057#profileId-132585" rel="nofollow noopener">https://makerworld.com/en/models/123057#profileId-132585</a>)&nbsp;It is scaled for X1C/P1/A1 bed size but you can as well resize it to match A1 Mini. But then you will have to adjust the layer height filament change accordingly.

Dragon Carve Snack Box

interesting

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

tools

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-15_92eaaa9691a14.gif"></figure>The gearbox used in this design is modular and will be released as it's own series soon™, if you have any thoughts or feedback please share so I can continue to improve the design!<h3>Modifications and Add-on Designs</h3><ul><li>[NEW!] Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li></ul><h3>Specifications</h3><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h3>Printing tips</h3><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h3>Launcher Parts</h3><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h3>Launcher Assembly (Gears + Housing)</h3><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don't remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h3>Toroidal Ring Assembly</h3><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h3>Changes</h3><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM launcher featuring compact planetary gearbox

Toys

papsjundi

This is my second design trying to come up with a solution for the “Jumping Spool” issues. I shared my first design “<a target="_blank" href="https://makerworld.com/en/models/37390#profileId-35773" rel="nofollow noopener">AMS SPOOL GUARD”</a>, but after that… I tried to document and learn a bit more to understand why do the spools jumps in the first place. I shared some slow-mo video on facebook groups and got so many feedbacks (and mockings) I think understanding the cause would help come up with a better solutions… I think up to 3 things contributes to the spool jumps 1. When the filaments are low, the angle becomes sharper / steep.. so the extruder makes a more forward pull instead of downward… 2. Extruder speed is faster than the Front Roller, so it was holding it back (plus sharper angle too) 3. Tangled filament so for Tangled filament, it's probably for someone smarter than me to solve lol I am attempting to eliminate or at least reduce cause number 1, which is height differences. First try, I tried to modify the first design, and move the “bar” from the back to the front, using the same mount (which was a nice secure spot mount it) The problem with that idea I don't have a place for the mount for the left and right side of the AMS… <img src="https://media.printables.com/media/prints/613353/rich_content/e37c8aab-0f0a-44d0-b74a-ccb176d3b0da/screenshot-2023-10-13-at-21225-pm.png#%7B%22uuid%22%3A%226533e8de-8244-4d91-8f45-3027d0872bba%22%2C%22w%22%3A2424%2C%22h%22%3A1488%7D">&nbsp;I also tried the suggestion using the AMS Button + a longer PTFE attached This helped to reduce the wear and tear but it the ptfe tube is so flexible so it will still bend and the spool jumps too. Some one also suggested putting a battery to wedge the spool so it does not wobble, I tried that too (using the same mount as my previous design) with removable “wedges” of various thickness <img src="https://media.printables.com/media/prints/613353/rich_content/698daa02-f726-48fd-9823-36b783c63904/ptfe.png#%7B%22uuid%22%3A%22f9afdcae-21e2-4bfe-9860-de866fae6acc%22%2C%22w%22%3A2275%2C%22h%22%3A1812%7D"> So instead I looked at the possibility of mounting it on the First Stage Feeder, so I took my spare one and measured the openings… <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/d227a3ad-e665-4d91-a4c0-1c112fbb242f/img_5562.jpg#%7B%22uuid%22%3A%222fa0137b-b5e8-45ba-a9bb-89d9003968fa%22%2C%22w%22%3A4032%2C%22h%22%3A2268%7D"></figure>&nbsp;<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/63fb7587-98e4-45af-b4a7-6221035b0033/screenshot-2023-10-12-at-84758-pm.png#%7B%22uuid%22%3A%22a9663804-c66c-4afc-b38a-89c9d5f7001e%22%2C%22w%22%3A2152%2C%22h%22%3A1550%7D"></figure>Went through several iterations until I come up with the latest one. No… it was NOT modelled after the Iron Throne :) <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/dcc3e938-d22a-416d-80d5-6ffd34569ae0/img_5563heic.jpg#%7B%22uuid%22%3A%22a9574cb1-cbdb-4c55-a05d-9f098a0b067c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>1 issue I found that, the filament will scar the Helper… This is just after 1 print… &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;So I added a 4x25mm SS rod on top, you can get them on <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">amazon</a> it should sit flush in the cavity provided. <img src="https://media.printables.com/media/prints/613353/rich_content/384ce9b8-e3f2-46a5-badf-d8dc2bee9a55/amshelper150.png#%7B%22uuid%22%3A%222f61f194-6b24-4b8c-b906-f8761571eeaa%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D">&nbsp;and here's the finished project… at least for now…<img src="https://media.printables.com/media/prints/613353/rich_content/bcfa4439-d640-4844-8efc-bf0ef2d0c409/img_5565.jpg#%7B%22uuid%22%3A%22dc375791-2af7-4e2b-b3c1-95ac90104a51%22%2C%22w%22%3A5712%2C%22h%22%3A4284%7D"> This is by no means it will fix all… but at least it “should” make the angle less steep… and the filament will go more straight down to the first stage feeder. I am still studying but at least this is for now one solution that might reduce the issues… I would love you to try and give me feedback… I included the 3MF for Bambu Studio, comes in 2 plates… if you want to use the <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">metal rod</a> and logo, you can print plate 1, if you don't then you can print Plate 2. 0.3 mm first layer , the rest 0.2 mm Layers - Adaptive Layer Gyroid infill at 30% to make it stiffer. Step files are also uploaded if you like to tinker / remix… please do. Any suggestion / comments please hit the reply :) <img src="https://media.printables.com/media/prints/613353/rich_content/b976f4ef-df35-4284-b3e9-64baceb676eb/build-plate.png#%7B%22uuid%22%3A%22dd3f7935-07e1-4c02-8237-642bb1697be8%22%2C%22w%22%3A2462%2C%22h%22%3A1318%7D"> Thank You! NOTE: this was designed for the original AMS, I have not tested with Hydra Mods… &nbsp;&nbsp;

Bambu Lab AMS Helper

bambu lab

VEK_3D

*ATTACHED IS A LINK DIRECTLY TO THE FILES IN STL FORMATIronman Mark 46/47 Helmet 3D Printable Model. This was modeled using CGI reference for great exterior accuracy.These 3D models have been been test printed before uploading in order to ensure 100% quality guarantee.There is a custom license included with the file that is subject to change if necessary. I'd love to see what you make so feel free to share the finished product with me&nbsp;Uses 10mm by 2mm magnets

lego

interesting

tools

Toys

bambu lab

super hero