e_engvall

Dr Operator

UPDATE 6/26/2024: Giving my 8-Ball a spin today, one of the tiles came loose so I attempted to take it apart and in doing that, I snapped off one of the clips on the 2nd Half. I think I would like to have the option of opening and closing the 8-Ball to resolve any issues that may arise so I&#39;m going to redesign how to two halves connect.  Looking through all of the “airless” designs a while back, I had noticed that there was one obvious omission from the airless collection, airless billiards. I thought for sure an airless 8-ball would do well, so I made a quick one and while making that I started to think about a magic 8-ball and how cool it would be if I made a liquid free, 3d printable version. My initial thought was to just make a hollow ball with four magnets around the window and a dice floating around inside the ball that was also covered in magnets so you would just shake it until the magnets on the die connected with the magnets on the window. The problem with that is it would be super noisy as well as potential damage to the ball, window and die when shaking it. At an impasse, I decided to move onto other projects and let the idea of a liquid free magic 8-ball marinate for a while. Eventually, the answer came to me and it&#39;s pretty simple.  A wheel on the inside of the ball has eight different answer tiles attached to it. The wheel is attached to the 1st half of the 8-Ball via a 6204 Plastic Deep Groove Ball Bearing. There are two 4mm x 2mm magnets embedded between each answer tile on the wheel and one magnet embedded in each half of the 8-Ball. After spinning the wheel, the magnets on each half of the 8-Ball will “grab” an answer when the wheel slows down. Occasionally, the wheel will stop between answers and you need to give it a little shake before the magnets take hold.   ASSEMBLY:&nbsp;&nbsp;First thing you need to do is insert the answer tiles into the wheel. Make sure that the handle is on the right side of the answers as seen in the photo below. Next, embed the magnets into the wheel, making sure that the polarity of each magnet is the same. I would also suggest using supper glue to secure the magnets.<figure class="image image_resized" style="width: 33.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-18_4bcc35fa34e698.png"></figure>&nbsp;&nbsp;&nbsp;Next, you will need to connect the two face parts with the two halves of the 8-Ball. The face parts are numbered on the inside of each piece. The face with a 1 on it fits into the 1st Half (the one with the 8) and the face with a 2 fits into the 2nd Half. Once you have that done, embed the magnets into each half of the 8-Ball. Make sure that these magnets have the opposite polarity from the magnets on the wheel.<figure class="image image_resized" style="width: 58.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-23_04522cc844ecf.png"></figure>&nbsp;&nbsp;Next, take your 6204 Plastic Deep Groove Ball Bearing and fit it onto the 1st Half of the 8-Ball.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-23_e17f71d1fd886.png"></figure>&nbsp;&nbsp;And then fit the wheel onto the bearing.&nbsp;<figure class="image image_resized" style="width: 33.38%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-18_dc87d53ddfec8.png"></figure>&nbsp;&nbsp;Next, fit the 2nd Half onto the 1st Half/Wheel, gently snap them together and you&#39;re done.<figure class="image image_resized" style="width: 50.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-18_998a10fae13998.png"></figure>&nbsp;<figure class="image image_resized" style="width: 30.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508707/design/2024-06-18_164777c13a77b8.png"></figure>&nbsp;&nbsp;

Not So Magic 8-Ball

Toys

K2_Kevin

<h2>Bambu Tool Holder (3 Versions Available - Gridfinity Compatible)</h2>Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!<h3>Versions Available:</h3><ul><li>Version #1 - <ul><li>6 Piece Tool Set</li><li>Lube Tool(s) Holder</li><li>2 extra scoop bins</li></ul></li><li>Version #2<ul><li>6 Piece Tool Set</li><li>Scraper Holder</li><li>2 extra scoop bins</li></ul></li><li>Version #3<ul><li>6 Piece Tool Set</li><li>3 extra scoop bins</li></ul></li></ul><h3>Holds Tools:</h3><ul><li>6 Piece Tool Set - Choose Below</li><li>2x Lube Tools - <a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a></li><li>2x Hex Scrapers - <a target="_blank" href="https://makerworld.com/en/models/71757#profileId-75921" rel="nofollow noopener">https://makerworld.com/en/models/71757#profileId-75921</a></li><li>Gridfinity Compatible</li></ul>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-30_8967eae47f71.png"></a><a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener">https://makerworld.com/en/models/14462#profileId-37136</a><a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-30_6579a2464af32.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-31_7f556b41a717f.png"></a>&nbsp;&nbsp;&nbsp;

Bambu Tool Set Holder - 3 Versions - Gridfinity

Bambu Tools

warrell72

Pokémon Gen 1 deck box collection, each styled after the iconic Poké Balls from the gen 1 games. The classic Poké Ball, Great Ball, Ultra Ball, and Master Ball.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/181838" rel="nofollow noopener">Love Ball can be found here.</a>&nbsp;OverviewThe magnetic sliding lid secures your sleeved deck, while a versatile, removable dice tray insert stores accessories. The lid's space-efficient design cleverly stores underneath, and magnetic stacking ensures tidy storage. Top loader display slots showcase cards, providing an easy way to identify your contents.&nbsp;Parts count: 3&nbsp;Key Features<ul><li>Magnetic Sliding Lid: The deck box has a magnetic sliding lid that securely snaps into place, ensuring the safety of your sleeved deck. This feature provides easy access while keeping your cards protected.</li><li>Versatile Dice Tray Insert: Accompanied by a dice tray insert, the deck box offers a convenient space for your dice, counters, and other game accessories. The tray is removable, allowing you to create more room for additional cards when needed.</li><li>Space-Efficient Lid Storage: The lid cleverly slides off and can be stored directly underneath the box. Secured again by magnets, this design minimizes the space it occupies in your playing area, ensuring a clutter-free gaming experience.</li><li>Stackable Design: Magnets embedded in both the base and lid enable seamless stacking of multiple deck boxes. This innovative feature not only facilitates easy storage but also enhances maneuverability, providing a tidy and organized gaming space.</li><li>Top Loader Display Slots: The deck box features strategically placed slots at the front and back for top loaders. Showcase your favorite cards, deck lists, or ink types, eliminating the mystery of what's inside each box.</li></ul>Printing Details&nbsp;Recommended filaments:<ul><li>Pokeball: eSun Pla+ AA Cold white & AI Fire engine red</li><li>Great Ball: eSun PLA+ AV Blue & AI Fire Engine Red</li><li>Ultra Ball: eSun PLA+ AD Black & AO Dark Yellow</li><li>Master Ball: eSun PLA+ AX Purple & AK Magenta</li></ul>Hotend: 0.4mm Hardened SteelPrint time: 8hrs - 18hrs - model depending; see print profiles for more information&nbsp;Printing Tips:<ul><li>Use the provided print profiles for best results.</li><li>I would recommend printing the painted deck boxes on one build plate and lids & trays on another.</li></ul>AssemblyThe magnets used are 15×5×3mm; the deck box will function without these, but some features are lost. Take care to mark the top of magnets before inserting to ensure the correct orientation. When printing multiple boxes, be sure to check orientation with other boxes before assembly to ensure they work nicely together.

Pokémon Gen 1 Deck Box Collection

Pokémon 

Rilot Designs

This is similar to other tools available but I wanted to create my own. It's in use daily.Everything should print without supportsTo complete you will need:3 x Idlers6 x V rollers1 x 2040 V-slot extrusionM5 boltsGT2 beltWeights (I use 608zz bearings)&nbsp;I've included STEP files so you can customise to your liking