dullsdetail

Hanktankstudios

This is my remixed model from <a target="_blank" href="https://www.thingiverse.com/thing:5882340" rel="nofollow noopener">https://www.thingiverse.com/thing:5882340</a> for an advanced Joy-Con Grip! It feels great compared to the stock grip that Nintendo sells. It also has the player indicator lights as well so you never have to take the JoyCons out to check. The handles make for a great experience and make playing games with JoyCons a bit more bearable.

Switch JoyCon Advance Grip

Gaming needs

Shaztech.info

Complete open source project with cheap and easily available parts. All 3d printable parts are available, Gerber PCB are packed in zip for easy drag-drop in your prefered provider (JCLPCB, PCBWay, etc). Software are available in pre-compiled (bin files) for the ESP32, or all Arduino files are there so you can edit them. I&#39;ve included all the library I used. The full LCD interface is in Squareline Studio. Just follow the guides in order to assemble it once you have all the parts.&nbsp;<a target="_blank" href="https://github.com/Shaztech/Pilldispenser" rel="nofollow noopener">Go see my github for all the files and guides needed</a>&nbsp;Features: USB Powered (5V, 500mah) Wifi configuration directly on the screen NPT automaticaly updated time (Need Wifi for the time to work) UTC/DST configurable on the screen Time/Date screensaver (can be disabled) Full interface on the touch screen Multiples users can be defined by colors Audio/Visual Alarms for each tray/users (audio alarms are repeated every minute till dispensed) Alarms are mp3 files on the SD card (so can be changed by the user) Can stack up to 10 trays 30 sections (can accomodate multiple/large pills) for each tray Manual dispense of each tray Visual indication of remaining pills (P-Touch label 30 to E) Web interface for easy configuration with browser Telegram integration (v1.2+)&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/shaztech_info" rel="nofollow noopener">Buy me a coffee</a>&nbsp;Thanks to <a target="_blank" href="https://makerworld.com/en/@johnyohanna" rel="nofollow noopener">johnyohanna</a> for this jig to help with the soldering of the boards.<a target="_blank" href="https://makerworld.com/en/models/445245#profileId-351648" rel="nofollow noopener">https://makerworld.com/en/models/445245#profileId-351648</a>&nbsp;

Automatic pill dispenser

Best Large Projects (useful)

CasaPrint3D

Important: Using a heat-resistant material is critical for this project, especially for the clip that attaches to the vent. Beware of risk of clip deformation after parking under the sun, it may become loose over time (even with PETG). Temperature inside a car&#39;s dashboard can easily exceed 65C (150F) on a typical summer day.&nbsp;Please note than plastic-to-plastic contact will often generate a bit of noise, but personally I don&#39;t even notice it when I&#39;m cruising. If you already printed the V1 version, the only parts that have changed in geometry and that need to be reprinted are: ‘shaft’, ‘nacelle_top’, &#39;tip&#39;, and ‘fan_with_brims’. The default vent clip included, is now printed flat for increased strength.&nbsp;This miniature jet engine easily attaches to your car&#39;s AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container.&nbsp;Among the things you can place inside here are some options:<ul><li>Freshly roasted coffee beans</li><li>A cotton with a few drops of essential oils</li><li>Aromatic plant leafs (lavender, rosemany, etc) - make sure they don&#39;t pass through the lid once it&#39;s closed</li></ul>Utilization<ol><li>Place the aromatic elements inside the recipient and screw the lid on top.</li><li>Screw the top cover</li><li>Place the fan - the side with extruded circle goes up </li><li>Insert the shaft - press until it clicks or hits the bottom. Make sure it is well aligned.</li><li>Place the tip of the fan and screw the car vent clip on the rear part. In case the tip doesn&#39;t stay atttached try scaling it down slightly.</li></ol><img class="image_resized" style="width: 71.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-16_4560e8ec92314.png">Important:<ul><li>Printing with a heat-resistant material (i.e, ABS / ASA)</li><li>If the fan is too lose, which may happen depending on your tolerances try scaling it down slightly.</li><li>If the vent clip doesn&#39;t work for your car, I have included a second design as well.</li></ul>If that still doesn&#39;t work, please feel free to reach out to us in the comments.<ul><li>The fan may not spin at lower air conditioning settings, but a bit of WD40 on the shaft may help.</li><li>As a general caution: Do not place any ingredient that can be bad for breathing and do not manipulate while driving.</li><li>Remember that this file is for personal use only - For a commercial license please check our <a target="_blank" href="https://www.patreon.com/CasaPrint3D" rel="nofollow noopener">Patreon</a></li></ul>Print Settings:<ul><li>0.16mm layer height for the fan, the rest can be done at 0.2</li><li>No supports</li><li>Clean the fan from any burr or imperfections after print to improve the spin.</li></ul><a target="_blank" href="https://www.youtube.com/shorts/2Zy5KAO0LXY" rel="nofollow noopener">https://www.youtube.com/shorts/2Zy5KAO0LXY</a>&nbsp;If you&#39;d like to support our work, you can donate here: <a target="_blank" href="https://ko-fi.com/casaprint3d" rel="nofollow noopener">[Ko-Fi]</a> or give us a boost 🚀. Your contribution, no matter how small, helps us to continue bringing more 3D models to life. Thank you!&nbsp;Make sure to check out our latest design!: Anti-strees fidget pen with gears for 0.2mm nozzle.<a target="_blank" href="https://makerworld.com/en/models/458729#profileId-366866" rel="nofollow noopener">https://makerworld.com/en/models/458729#profileId-366866</a>&nbsp;<img class="image_resized" style="width: 50.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-10_c31a44e8121fa.gif">&nbsp;Happy printing!

Turbofan aroma diffuser - Car vent mini Jet engine

car parts

Mackom

You can buy one here: <a target="_blank" href="https://www.etsy.com/listing/1603293989/motorcycle-chain-lubrication-guide-428" rel="nofollow noopener">Etsy - Mackom</a>&nbsp;- The spray is split into two streams that go onto both sides of the inside link. - Faster - More efficient with less mess and less usage of oil - Chain guides for easier usageSnaps onto any standard-size spray can - attachment point size ~16.5mm.&nbsp;

Motorcycle Chain lube guide - 520 - 525 - 428

motorcycle 

BrandedAbstract3D

<h3>Model</h3>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you'll need:<ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.&nbsp;<ul><li>Caliper: Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li>Brake Disc: Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li>Display Screws: Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li>Brembo Vanity Plate: There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.&nbsp;Happy Printing!

Brembo Drinks Coaster Set

car art

SK07 Skipper07

Toy Railway Engine 1.4

Toy Railway Engine 1.4

kid toys

wuguigui

Updated 05/04/2023:New small-size fish head and tail cap models are available, now you can print the Tag for cats :) See the images for more information.some pictures of pet models from my friends.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/2112721175/draft/2023-08-13_bptx530azflq.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/user/2112721175/draft/2023-08-13_kzvpsc61klqi.jpg">___________________________________________Updated 04/04/2023:I uploaded the “Letter_Blank” and"5_Letter_Together" STEP files today, now you can modify them as your wish, for flexible customize use. ___________________________________________Updated today:I designed a smaller one, and the print result is good, some tiny gaps might need sanding if the assembly is too tight. See the image for more information.Download the files with “small”.___________________________________________This is a cute dog ID tag with a movable type of dog's name(up to 5 letters), there is a space that can put a contact message in it, for someone to find the lost dog in case. All the corners are round, make sure the dog will not feel uncomfortable.All 26 Letters and a blank one are included in the download files, you can choose your dog's name to print.&nbsp;&nbsp;&nbsp;

Movable Type Dog ID Tag

mobiobi

Recommend full support, low layer height, half speed, and 1mm or Z-hop, as the long, lain-out profile may cause problems otherwise.Pic of Slicer 2.6 Alpha with Organic support, spoon at 45°, though I haven't tried this myself yet.Printed here 0.15mm layers, in Polymaker Matte Peanut PLA.<a href="https://beavercrafttools.com/collections/diy-completed-kits/products/diy04-celtic-spoon-carving-kit-complete-starter-whittling-kit-for-beginners-adults-teens-and-kids" rel="nofollow">https://beavercrafttools.com/collections/diy-completed-kits/products/diy04-celtic-spoon-carving-kit-complete-starter-whittling-kit-for-beginners-adults-teens-and-kids</a>

Celtic Spoon

for the home 

ralf.hoerhager

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

shop tools

mcmaven

<h2>Summary</h2>This is a Motorized version of my original Triaxial Tourbillon Clock Make. The two major changes are that this version uses stepper motors to driver the carrier, and it incorporates the Triaxial Quartz Movement Upgrade. However, there are many other subtle differences from the original Triaxial design.Here is a time lapse version of the design: <a target="_blank" href="https://youtu.be/so1m_iGdigE" rel="nofollow noopener">https://youtu.be/so1m_iGdigE</a>, and a real-time video: <a target="_blank" href="https://youtu.be/2vyGcqjci-Q" rel="nofollow noopener">https://youtu.be/2vyGcqjci-Q</a>.&nbsp;Overview of my Triaxial makes:My original Triaxial Tourbillon remix (https://makerworld.com/en/models/13300) is weight driven and the STLs are versions of A26's design that I modified to add ball bearings and some other features. Given the plastic escapement parts the remix was never meant to keep correct time, also it is very inefficient so the weight only keeps it working for a couple of hours. Therefore it is not a practical clock. I designed the 'Triaxial Quartz Movement Upgrade' (https://makerworld.com/en/models/13301), which replaces the clock face in the remix, so it could be used to display the correct time when it was hanging on a wall.The weight in the Triaxial Tourbillon remix is painful to wind, so make it easier to animate I designed the Motorized Astronomia. For this Motorized Astronomia design I basically started with a clean slate. All of the parts have been redesigned, with no intention to be compatible with my original remix.&nbsp;<h2>Print Settings</h2>Printer Brand: PrusaPrinter: I3 MK3SRafts: NoSupports: YesResolution: 1.5mmInfill: 15%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA" rel="nofollow noopener">Hatchbox PLA </a>

Triaxial Motorized

gear wonders 

ANIMAL MODS

I wasn&#39;t happy with slinging the tool head cover over the top rod - leaving it in a precarious position / stressing out the cable during maintenance.Here is a simple hanger which loosely rests over the top rod and fits into one of the cover&#39;s triangle openings with a slot to keep it in place.Safely stows the tool head cover and frees up your hands so you can get business done.No supports needed for print.&nbsp;The updated design with a deeper slot per user request was uploaded but for some reason makerspace is not updating the link.Download the .stl if you are having issues accessing the latest version.&nbsp;&nbsp;&nbsp;

P1P / P1S Tool Head Cover Hanger

Print for the Printer 

<h2>Summary</h2>There is a specialized LED Kit for this mushroom lamp on Amazon now:<a target="_blank" href="https://www.amazon.com/dp/B0D75SLLY9?maas=maas_adg_FD4EEC810D7A3AE13B04CDE09F6026DD_afap_abs&amp;ref_=aa_maas&amp;tag=maas" rel="nofollow noopener">Mushroom Lamp Components Kit for 3D Printing</a>&nbsp;Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: <a target="_blank" href="https://makerworld.com/en/models/12926" rel="nofollow noopener">https://makerworld.com/en/models/12926</a>I made a mushroom night lamp based on the small mushroom I made before: <a href="/thing:4978281" rel="nofollow">https://www.thingiverse.com/thing:4978281</a>It&#39;s easy to assemble, without screws(maybe need a little glue to stick the 9 caps on the head). I recommend LED light（less than 3.5W) with E27 holder for this lamp.If you were in China, you can buy the LED light and holder at: <a target="_blank" href="https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8" rel="nofollow noopener">https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8</a>Thank you for loving it! :)I also update a new version at( see the image below): <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a</a>it has a new structure and is more compact with less filament.other 2 cute mushroom lamps:Mushroom Lamp B: <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b</a>Mushroom Lamp C(suit small space 3d printers): <a target="_blank" href="https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c</a>A funny Banana Lamp(free): <a href="/thing:5216983" rel="nofollow">https://www.thingiverse.com/thing:5216983</a>Banana Lamp 2.0: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a><h2>Print Settings</h2>Printer:snapmaker 2.0 A250 &amp; anycubic i3&nbsp;Rafts: No&nbsp;Supports:Yes&nbsp;Resolution: 0.2&nbsp;Infill:30-40%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA%2B" rel="nofollow noopener">any PLA+ </a>any<h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/212286bf-cf1d-4206-8ba1-40d3b8e90a15.jpg" alt="image">&nbsp;Mushroom Lamp Family&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/591e3f47-1d16-47f4-bbe4-0936b7d2f1b5.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/94bf8ef4-12d7-4148-aceb-69a083d8ad55.jpg">&nbsp;Printing with support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/cf919e6f-b83c-4927-9acf-26c8caa0f570.jpg">&nbsp;Printing without support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/89291392-bace-4a3b-b8e3-9fbd0593f90b.jpg">&nbsp;Printing without support