dude_blight89

abbymath

The original webpage for this post is on Printables. It was transferred here through the automated system, so some formatting, file links, etc. may not work as intended. Please see <a target="_blank" href="https://www.printables.com/@abbymath/models" rel="nofollow noopener">Printables</a> for original post or see <a target="_blank" href="https://cults3d.com/en/users/abbymath" rel="nofollow noopener">my full collection of designs on Cults3D</a>. -Abby<h4>Highway Sign specifically for the 2024 Community Print Drive.</h4>Original design for the <a target="_blank" href="https://print.thelmshow.com/pages/2024-christmas-community-print-drive" rel="nofollow noopener">2024 Christmas Community Print Drive</a>.The “Highway Sign” insert prints flat and is set up for a filament swap for the lettering and border. The “Base” is a separate model, and is adapted from my <a target="_blank" href="https://cults3d.com/en/3d-model/art/simple-stands-trophies" rel="nofollow noopener">Simple Stands and Trophies</a> design on Cults3D.More Models: <a target="_blank" href="https://www.printables.com/@LoyalMoses/collections/1503183" rel="nofollow noopener">Collection of all approved 2024 Christmas Community Print Drive models</a>  <h3>Additional Information and Print Settings</h3><figure class="table"><table><tbody><tr><td>If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: <a target="_blank" href="https://print.thelmshow.com/pages/2024-christmas-community-print-drive-printing-guidelines" rel="nofollow noopener">2024 Christmas Community Print Drive Printing Guidelines</a></td></tr></tbody></table></figure>The “Base” model is 104 x 50 x 25 mm. I printed with 0.25 mm layer height, 3 perimeters, 3 top and bottom layers, and 10% infill.The “Sign” model is 91.4 x 82.0 x 4.4 mm. The color swap for the top is at 3.5 mm height; the lettering/border is 1 mm thick. I printed with 0.25 mm layer height, 2 perimeters, 3 solid top and bottom layers and 15% infill.To get the texture on the green part of the sign, after two solid layers, I printed with 80% honeycomb infill on the top layer, but this is not required for the toy drive. Also, I changed the top part (lettering and border) to have 1 perimeter to allow more room for the external infill, resulting in cleaner printing of the letters and border. (These are the same settings I used with my <a target="_blank" href="https://www.printables.com/model/630929-pirate-flag" rel="nofollow noopener">Pirate Flag</a> for the 2023 Print Drive.)No supports. No raft.<h4>More of my designs on Cults3D: <a target="_blank" href="https://cults3d.com/en/users/abbymath" rel="nofollow noopener">https://cults3d.com/en/users/abbymath</a></h4>Not for commercial use. No derivatives. See license below.&nbsp;Note: Most photos from earlier, smaller model. Print Drive standard models are posted here.

Highway Sign for 2024 Community Print Drive

2024 Xmas Print Drive

mercadogarzas

Kansas City Chiefs 3d logo 180mm x 180mm&nbsp;Use with:“V” connector model<a target="_blank" href="https://makerworld.com/en/models/143573#profileId-156082" rel="nofollow noopener">https://makerworld.com/en/models/143573#profileId-156082</a>&nbsp;Chain from “Billrobland"<a target="_blank" href="https://makerworld.com/en/models/25960#profileId-22348" rel="nofollow noopener">https://makerworld.com/en/models/25960#profileId-22348</a>&nbsp;Need about 30 chain links to fit adult male.Split key ring&nbsp;Check out my ACORN link system with Bobbles to make you chain medallion even better<a target="_blank" href="https://makerworld.com/en/models/172187#profileId-189065" rel="nofollow noopener">https://makerworld.com/en/models/172187#profileId-189065</a>&nbsp;&nbsp;models can be shrunken down to 15=14% to make earrings&nbsp;alternate logos will be made later

Kansas City Chiefs 3d logo 180mm series

Kids stuff

MICHAL_3Dtisk

HOT WHEELS LIGHTBOX 

Lightboxes

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

2024 Xmas Print Drive

Kids stuff

Lightboxes

Things to print