ducaapple

STER

In the image, a Polymaker 3kg spool is used.&nbsp;I couldn&#39;t fit Polymaker&#39;s 3kg paper spool, so I made a bracket to expand it by 3cm. Attach it to the Left_Arch_Top side. Along with the expansion, the brace and rollers have also been extended. In addition to the original parts, you will need M3 inserts and 4 sets of M3x12mm screws. If you use this expansion adapter, it will be expanded by 3cm, making it approximately 126mm wide. A spool with a height of 110mm can be inserted.&nbsp;PLA, 3 walls, 15% is strong enough.&nbsp;https://makerworld.com/en/models/98832?from=search#profileId-105442The performance of the original model is good, so it is very stable.&nbsp;24/04/06Due to requests, we have added a model with a pilot hole of 3.9mm.

Remix V-Spooler 3kg spool Extension

Respooler

kisik20

New info: some including me wanted to create a smoke absorber for soldering, here is a new project:<a target="_blank" href="https://makerworld.com/en/models/495413" rel="nofollow noopener">https://makerworld.com/en/models/495413</a>ENJOY&nbsp;INFO: Hi guys, i have news for you. I made new crocodile clip. Clip is smaller and bether for work. Enjoy Clip is here:<a target="_blank" href="https://makerworld.com/en/models/492860" rel="nofollow noopener">https://makerworld.com/en/models/492860</a>&nbsp;Soldering Tool Holder. Adjust the support pipe arms, regulate the whole project. When 2/4 arms needed, only adjust the base arms, very convenient to change the height, angle of gripping without tedious and stiff to adjust arms one by one, or put items off and put on to change the orientation. More freely than traditional single helping hands arms and protect your precise item.&nbsp;1.The three to six hand tool quickens soldering,electronics, and DIY projects allowing you to finish your work faster than ever before! Our Third Hand makes positioning a breeze with2.base save space,Easy to carry,Free hands3.alligator clip tips for 360 degree rotation for easy operation and work4.Super compact design for an ultra portable third hand tool5.Very suitable for the complex difficulty welding such as model airplane repair, easy to clamp the solder and operation.

Soldering Tool Holder Flexible Arms helping hands

3 Mano

plucbernier

Simple cage for mobile photography or videography. You will need to provide a phone holder. all holes are threaded with 1/4 20 or 3/8 16 threads. Good for mobiles or small mirrorless cameras.&nbsp;See my other print «Phone Cage NATO handle» for a simple, compatible handle to fit the cage.

Cage for phone photograhpy or small mirrorless cameras

Supporti

ozarkexpeditions

<h2>Brick Your Name - Customize on MakerWorld!</h2>Get ready to personalize your world with Brick Your Name! This fun and interactive tool lets you design your very own brand-compatible baseplates with custom names. Try this comprehensive baseplate name designer on MakerWorld, we&#39;re excited to see the unique creations you&#39;ll bring to life. Using the easy SCAD generator, you can craft vibrant and personalized baseplates perfect for any hobbyist, maker, or brick enthusiast. Whether you&#39;re enhancing your collection or creating a one-of-a-kind gift, Brick Your Name adds a delightful touch of creativity to all your projects.<blockquote>📢 New! Sell physical prints of any of my designs by joining my new <a target="_blank" href="https://www.patreon.com/Ozarkexpeditions" rel="nofollow noopener">Patreon </a>subscription and support more great future designs!</blockquote>Create them for your family, friends, businesses, workshops, and more!<figure class="image image_resized" style="width: 49.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-06-11_6fa0ce3819af3.png"></figure><blockquote>📢 Custom stands coming soon - we will have various options to display your themed name plates in style.</blockquote><blockquote>📝 Long loading times - High-resolution cylinder generation may cause brief delays in nameplate rendering.  </blockquote><h3>Steps to Create Your Custom Brick Baseplate</h3>1 - Enter Your Name - In the &#34;name&#34; field, type in the text you want to appear on your baseplate. Capital letters work best for a clear and bold design. For example, type &#34;MAKER&#34;.2 - Choose Your Font Select a font from the dropdown menu that suits your style. There are several to choose from and try out.3 - Adjust Settings Use the sliders to set the height, weight, spacing, and alignment of your text. Adjust &#34;textHeight,&#34; &#34;textWeight,&#34; &#34;letterSpacing,&#34; &#34;xAdjust,&#34; and &#34;yAdjust&#34; to fine-tune your model. Adjusting these values can make the baseplate look amazing. You want to try to avoid making little slices of studs, if possible, especially around the outside edges.  📢 The advance settings allow you to make printer specific adjustments. For example, If you&#39;ve printing bricks from the <a target="_blank" href="https://makerworld.com/en/models/479021" rel="nofollow noopener">Ultimate Brick Customizer</a>, then I would recommend leaving the stud rescale to 1.0 or with name brand bricks, adjust the stud rescale to 1.05 for a snug fit. Consider printing a small example to ensure you have the correct scale that matched your printers&#39; tolerances for name-brand bricks.   4 - Generate Your Model Once all adjustments are made, click the &#34;Generate&#34; button to create your custom baseplate model. This will render a preview of your design.5 - Download Your Model After generating the model, click the &#34;Download&#34; button to save your design. You can now print or share your custom brick baseplate. Please consider printing from the 3MF file for the best results!  Enjoy customizing and building!&nbsp;Important NoteThis customizable model is designed for personal and educational use and not for commercial reproduction or sale under these brand name trademarks.&nbsp;Feedback WelcomeI hope you enjoy using this customizable brick generator. Your feedback is invaluable, so please let me know if you have any suggestions or improvements. Together, we can make the MakerWorld platform even better! If you&#39;d like to inspire us to make more fun toys and games, give us a 🚀, a 👍, and share!  Explore More of Our Models! <a target="_blank" href="https://makerworld.com/en/models/463568" rel="nofollow noopener"><img class="image_resized" style="width: 24.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-13_0d1f6d3fca672.png"></a><a target="_blank" href="https://makerworld.com/en/models/452361" rel="nofollow noopener"><img class="image_resized" style="width: 21%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-03_52b9e8ccc8501.gif"></a><a target="_blank" href="https://makerworld.com/en/models/390175" rel="nofollow noopener"><img class="image_resized" style="width: 24.86%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-03-23_20f08dbba5d8e.gif"></a><a target="_blank" href="https://makerworld.com/en/models/479021#profileId-390315" rel="nofollow noopener"><img class="image_resized" style="width: 23.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-31_320e7b7015e68.png"></a>

Brick Your Name - Customize on MakerWorld!

Lego

motor-fuzzi

Pretend it´s the 80s and use your old mouse from way back when, with an updated touch.   Inspired by the legendary Commodore Amiga 1351 “Tank mouse”, but with modern features, like scroll wheel and dpi switch.&nbsp;This mouse uses the Bambulab wireless mouse kit :<a target="_blank" href="https://eu.store.bambulab.com/de/products/wireless-mouse-components-kit-002" rel="nofollow noopener">Wireless Mouse Components Kit 002</a>&nbsp; Print in 2 colors (buttons darker) for original effect.&nbsp;Also available with a profile for one color or a profile with 2 colors on one print bed (AMS required).&nbsp;27.01.2024 small update: the “bridges” between buttons and scroll-wheel are now slightly reinforced for a more durable mouse. Thanks to “Himmelsnetz” for the suggestion.   Update: If you want to have the scroll wheel in the same color as the buttons (looks gorgeous), you can find a wheel from JeffA here: <a target="_blank" href="https://makerworld.com/en/models/195097" rel="nofollow noopener">Scroll Wheel</a>

Amiga Tank Mouse 

Campioni filamento

YeetYeet

Break action rocket launcher that shoots rockets propelled by co2 cartridges. Rockets are held in reusable shells and upon firing, they deploy stabilization fins thanks to rubber bands. The rockets use 12g co2 cartridges which are often used for airsoft. That makes them quite affordable and available in any airsoft store. Launcher features picatinny rails on top and bottom of the barrel, making it possible to mount accessories like scope or laser. For more information and assembly guide see assembly.pdf in files.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=DbaiUHjH5wk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/DbaiUHjH5wk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> BOM:<ul><li>M3x8 7pcs</li><li>M3x60 2pcs</li><li>M3x35 2pcs</li><li>M3x25 1pc</li><li>M3x22 1pc</li><li>M4x25 1pc</li><li>M4x22 1pc</li><li>M4x10 4pcs</li><li>M4 nut</li><li>Springs 5,5mm OD, length at least 30mm (<a target="_blank" href="https://www.hornbach.cz/p/pruzina-tlacna-5-5x38-zinek-bily-baleni-8-ks/6488171/" rel="nofollow noopener">Springs from HORNBACH</a>)</li><li>Torsion spring - wire diameter: ~2.5mm, inner hole diameter: 8mm, outer diameter: 13.5mm, height: ~13mm (I got mine from <a target="_blank" href="https://www.globus.cz/cela-nabidka/produkt-01012794000" rel="nofollow noopener">this clamp</a>)</li><li>Nail 2.8mm x 40 (<a target="_blank" href="https://www.hornbach.cz/p/hrebik-do-krytiny-2-8x40-bez-pu-2-5-kg/8718694/" rel="nofollow noopener">HORNBACH link</a>)</li><li>12gram non threaded co2 cartridges</li><li>rubber bands  </li></ul>For additional types of rockets or if you want to create your own see <a target="_blank" href="https://www.printables.com/model/766344-co2-rockets" rel="nofollow noopener">Co2 rockets</a> (<a target="_blank" href="https://makerworld.com/en/models/188133" rel="nofollow noopener">Makerworld link</a>) In the files section you can find honing tool. This is not needed but can be used to smoothen the inside of the barrel. Simply glue sandpaper to it and insert 8mm tube into the center. Mount it onto a drill and use it to smoothen the barrel. UPDATE: Added shorter 167mm barrel so it can be printed on prusa mini or A1 mini. Thanks to <a target="_blank" href="https://makerworld.com/en/u/335516679" rel="nofollow noopener">@Ice_Maniac</a>, who found the correct set of springs and clamps on amazon: <a target="_blank" href="https://www.amazon.co.uk/dp/B0BWY3TY1K?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Clamps from amazon</a> <a target="_blank" href="https://www.amazon.co.uk/dp/B00W93X2IS?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Springs from amazon</a>

Co2 rocket/grenade launcher

Armi

T_WITHE

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:<ul><li>External and internal threads</li><li>Sizes: 3/8&#34;, 1/2&#34;, 3/4&#34;, 1&#34; (M18)</li><li>Traditional BSP thread</li></ul>Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials. Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.It&#39;s important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure! I experienced slight leakage at 6 bar, so please don&#39;t leave negative feedback because of this. Thank you! For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode. Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me! If you have any suggestions or requests, please contact me. This is a revised version of my original model with some additional sizes: <a target="_blank" href="https://www.thingiverse.com/thing:4904221" rel="nofollow noopener">https://www.thingiverse.com/thing:4904221</a>

Gardena quick connector set

idraulica

Jorge Rui

<h3>Introduction and contextualization</h3>A box for spools, I know there are many out there, but for those who already know me, they know that I like to do things my own way. So, I decided to make a box for the filament spools.  What is particular about it, you may ask:<ol><li>It must be closed and provide the best possible seal (I think I&#39;ve managed to do that)</li><li>Allow its production on the Bambu Lab X, P and A1 printer&#39;s (the mini is out), and that why the model is divided in 4 parts.</li><li>Easy printing with minimal material usage, PETG and TPU, and 3 screws and corresponding nuts to create a good seal, which is necessary for insulation.</li><li>It should be aesthetically pleasing, visually communicating its function (more on this later).</li><li>Be aesthetically interesting while fulfilling functional needs (such as sealing and others).</li><li>Allow for the placement of some desiccant at the base to maintain controlled humidity levels.<ol><li>Check my <a target="_blank" href="https://www.printables.com/model/878116-desiccant-container-for-spools" rel="nofollow noopener">Desiccant container for Spools</a></li></ol></li></ol><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_jwx6iotd86ps.png"></figure>This version cannot be used to feed the printer with filament (see image bellow, serving instead as a temporary storage container and always with the accessory mentioned in the previous point to keep humidity levels low. It should last for a few weeks... The time it takes for the desiccant to become saturated depends on the humidity in your area. I recommend <a target="_blank" href="https://amzn.to/3ywHAkg" rel="nofollow noopener">silica desiccant</a>, which can be reused by heating it in an oven or microwave.For more permanent storage, you can use vacuum bags.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_fsi2f6dt0gkp.png"></figure>So, here it is saying hi and taking off his hat ;)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_m7g62ayx5544.png"></figure>&nbsp;The Closing clips can represent the color and material that inside the box, the text on the clip can be edited on Bambu Studio.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_j4bvn16x1kfz.png"></figure>You can choose between the version with or without the logo, chose the 3mf file that suits you best.<blockquote>For some reason, there has been a movement within the community against displaying the Bambu Lab logo on my work. In my opinion, the logo is an interesting graphic element and much like in some sports, people enjoy showcasing the brand, creating a sense of belonging to a group. While there could be many reasons for opposition, tastes are subjective, making this a trivial matter that I will not discuss more.Another point to note is that neither Bambu Lab, Prusa, nor any other company pays me to include their logo on these models. This process is an inherent artistic feature. To end this, beauty is always in the eye of the beholder.</blockquote><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_aopgdwqnicdc.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zw0sh990xfk2.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_9evotkab6205.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_kybvegq67dk5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_l67ul8rmcu4t.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_c8y9du0irie6.png"></figure></td></tr></tbody></table></figure>And an example of a printed part with Translucent PETG from bambu labThere is a other version, prime, that was designed with the filament feed in mind, more advanced, with rollers, pneumatic adapter and other features:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_xv9fv02vwmir.png"></figure>If you are “<a target="_blank" href="https://www.printables.com/@jorge_rui/store" rel="nofollow noopener">my club member</a>” you can download it <a target="_blank" href="https://www.printables.com/model/880895-spoolbox-for-bambu-lab" rel="nofollow noopener">here</a>.<h3>Printing parameters</h3>Special care has been taken to provide the models with the printing parameters already defined; however, you are free to change whatever you them if necessary. The use of multiple colors should not hinder those who do not have a multi-material printing unit, as there are only 4 color changes throughout the process. That being said, the provided 3mf files are configured for use with the AMS and changing them for printing without the AMS is up to you.  I would like to emphasize that these models cannot be distributed in any way or form; therefore, any alterations are solely for your own use. This decision stems from issues I had previously, where my work was copied extensively, leading to accusations that I had copied the models myself (my own models…)<blockquote>Some may have some special feature that you can configure to your linking&#39;s. An examples is the closing clip that you can change the text label and material color to match the spool material.</blockquote><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_i6ypksrelafw.png"></figure><ul><li>Printing material <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG and TPU</a> from Bambu Lab,<ul><li>Other material can use other materials you may prefer, like <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PLA</a>, but PETG can make translucent parts (not easy, but possible (very slow and hot with a nice quality filament without moister, and don&#39;t expect &#34;glass&#34; like opacity. Here you can find an exceptional example of application: <a target="_blank" href="https://www.printables.com/model/15310-how-to-print-glass" rel="nofollow noopener">How To Print Glass by Rygar1432</a></li><li>the file “SpoolBox_translucent.3mf” contains some top lids (with logo and clean) with a configuration that I think will render you the best results without taking you days to print. The one made by Rygar1432 will give you the best result, but will be a very slow print approx. 20mm/s</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zzqvbl8t0tfh.png"></figure><h4>Parts included that are needed to print</h4><ul><li>Base (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA)</a>;<ul><li>Right</li><li>Left</li></ul></li><li>Top (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA</a>);<ul><li>Right</li><li>Left</li></ul></li><li>Joints (<a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">TPU</a>)<ul><li>Volume 1 &amp; Volume 2, They include:<ul><li>Side<ul><li>Top</li><li>Bottom</li></ul></li><li>Top<ul><li>Right</li><li>Left</li></ul></li><li>4x Foot&#39;s</li></ul></li></ul></li><li>Hinge and Closing Clip (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA or any other material you like)</a><ul><li>in total there are 2 parts, that print in place 4 bodies.</li></ul></li></ul><h4>Assembling</h4>See image on how to assemble (The exploded view may help one this, so check it)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_bega79b57gvh.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_04y1zjviaeqs.png"></figure>The feet&#39;s on the base must be glued if you what to use them (recommended).If you want to add a humidity sensor, there is a configuration for that on the 3mf file included. I&#39;ve use this <a target="_blank" href="https://amzn.to/3WDsFPk" rel="nofollow noopener">temperature and humidity sensor</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-21_4423bb8d0b54f.png"><figcaption>Box with humidity sensor</figcaption></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.Change Log<ul><li>(17-05-2024) - Initial release</li></ul>