Thank you! I printed in Bambu ASA-CF on Smooth PEI plate with a "beefy" profile of wall loops=5, top shell layers=5, bottom shell layers=5, and sparse infill density=20%. The result feels solid and hefty, which is what I wanted after printing other designs that felt flimsy. I also appreciate support for the Bambu refill label stickers, the option to print new labels, cutouts that show remaining filament, and the built-in filament clips! I only have one suggestion: It'd be nice if you added filament clip holes that match size and placement of OEM Bambu spools (*not* their MakerWorld printable spool, which seems to be slightly smaller holes). This would allow using other clip designs, which hold the filament near the spool's outer edge: https://makerworld.com/en/models/572667-bambu-spool-filament-clip-low-profile. While I appreciate the built-in filament clips, they're lower on the spool and difficult to use with a fresh refill. Thank you again though. I've already printed off three!