dtdionne

3D EVERYTHING

Profiles for all Bambu printers of our AMSSTTPU&nbsp;for more info check our website<a target="_blank" href="https://dudv2.com/products/ams-sttpu-filaments" rel="nofollow noopener">https://dudv2.com/products/ams-sttpu-filaments</a>Details & Specifications  Material Filament DiameterAMS STTPU 1.75 mm +/- 0.03mmPrint Temperature Heated bed:200-240°C 35-55°C)Spool capacity Hardness1 kg (2.2 lbs) 80D -65ASoak in water for 1-2 hour's the new hardness level will be 65AThis is a TPU filament and is highly recommended to be dried before use&nbsp;Recommend Printing settings <ul><li>Nozzle Temp 230c</li><li>Bed Temp 35-55 (i have even used the engineering plate with zero bed temp)</li><li>Flow Rate 1</li><li>Max Volumetric speed 8-10 (I have found 10 works fine for us )</li><li>Retraction Length 0.8</li><li>Wall loops 2 (i would say 3 if you are doing bigger prints will make it take longer to get softer)</li><li>Infill 5-10%  Lightning infill (if you use different patterns it will not get as soft do to you cant soak the the middle of the print)</li><li>Speeds Standard PLA speeds are fine to use </li></ul>&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/659254/2024-03-01_452f8ec6605db.png"><img src="https://makerworld.bblmw.com/makerworld/draft/659254/2024-03-01_9519cf778fa59.png"><img src="https://makerworld.bblmw.com/makerworld/draft/659254/2024-03-01_797a21660c32a.png"><img src="https://makerworld.bblmw.com/makerworld/draft/659254/2024-03-01_a6f6113547415.png">&nbsp;

DUDV2 AMSSTTPU PROFILES

Profiles

BubsBuilds

Each "cell" holds 60 chips and the tray has locations to hold 5 cells. Everything should print without any supports, brims, etc. I used PETG for all of my parts and they've held up great (I even subjected them to a move last year and they came out just fine!)Category: Toy & Game Accessories

Modular Poker Chip Tray

Poker

keeeal

<h2>N-DOF: The Modular Robotic Arm</h2>This project uses connectors that are compatible with <a target="_blank" href="https://www.thingiverse.com/thing:2194278" rel="nofollow noopener">Modular Mounting System (MMS)</a> and GoPro to join motorized robotic modules.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1192592401/draft/2023-08-05_d2d94ee93b48c8.gif"></figure><h2>Features</h2><ul><li>Modular: Ideal for flexible use and re-use. Try different arm designs without having to re-print parts. Disassemble and reassemble with ease.</li><li>Limitless: Print the same part multiple times and chain them together. N-DOF = "N Degrees Of Freedom".</li><li>Extensible: Have a motor or actuator you want to use in your own robot? Design a joint with GoPro mounts separated by 30 mm... Now it is N-DOF compatible!</li><li>Compatible: There are a huge number of mounts for various objects that are already compatible with N-DOF. Search for "Modular Mounting System" or "GoPro".</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1192592401/draft/2023-08-05_9edab726400658.png"></figure><h2>Included Modules</h2><ul><li>The included modules use print-in-place joints to keep part count low. They require supports when printing and a little force to move for the first time.</li><li>Included modules use NEMA 17 stepping motors.</li><li>The only non-printed parts required are M3 bolts to mount the motors.</li></ul>If you are thinking of designing a module that is compatible with N-DOF, these features are not a requirement.<h3>Base</h3><figure class="image"><img src="https://i.imgur.com/xpi3DVH.png" alt=""></figure><ul><li>Gear ratio = 6:1</li><li>Support blockers when slicing may help support removal.</li><li>If greater stability is required, print some <a target="_blank" href="https://www.thingiverse.com/thing:2194278" rel="nofollow noopener">MMS arms</a> to spread the legs out further.</li><li>2 x M3 bolts required to mount NEMA 17.</li><li>6 x legs.</li><li>1 x motor gear (with 12 teeth).</li></ul><h3>Gear Joint</h3><figure class="image"><img src="https://i.imgur.com/qK0Ncev.png" alt=""></figure><ul><li>Gear ratio = 4:1</li><li>Support blockers when slicing may help support removal.</li><li>This joint has an asymmetric range of motion: -60 deg to 150 deg.</li><li>3 x M3 bolts required to mount NEMA 17.</li><li>1 x motor gear (with 12 teeth).</li></ul><h3>Swivel Joint</h3><figure class="image"><img src="https://i.imgur.com/99MTfZ6.png" alt=""></figure><ul><li>No gearing.</li><li>This could be improved using planetary gears.</li><li>4 x M3 bolts required to mount NEMA 17.</li></ul><h2>Notes</h2><ul><li>Regular PLA might not be strong enough for the M5 bolts. I used <a target="_blank" href="https://polymaker.com/product/polymax-pla/" rel="nofollow noopener">PolyMax PLA</a> and have had no issues.</li><li>If extending the arm to great lengths, be sure to attach the base to a desk with a clamp so it doesn't tip over.</li><li>OpenSCAD code can be found at <a target="_blank" href="https://github.com/keeeal/n-dof" rel="nofollow noopener">https://github.com/keeeal/n-dof</a></li></ul>

N-DOF: The Modular Robotic Arm

Cool

E.T.

<h2>Airless Ping Ball 3.0!</h2>&nbsp;New mesh, new strength.&nbsp;Prints with a 3 layer raft for ease of adhesion and easy support removal!&nbsp;While this ball is a little heavy for table tennis, it DOES work (slams not guaranteed). Other uses include: Works as a fantastic cat toy if you toss a bell in at 60% print completion (or by itself).&nbsp;If you wish to sell this commercially, look <a target="_blank" href="https://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0" rel="nofollow noopener">here</a>&nbsp;Thanks!

Airless Ping Pong Ball 3.0

Airless

Brandon Raineri

<h2>Updates</h2><h3>Version 2.1 (09/27/23)</h3><ul><li>Added lead-ins to the filament entry cavity</li><li>Changed PTFE stop ledge angle at filament exit end</li><li>Added note about countersinking PTFE that enters the printer</li><li>Updated printing profiles</li><li>Added additional sources for the release rings so they can be purchased outside of the US</li></ul><h3>Version 2</h3><ul><li>Added through hole for an M3x20mm mounting screw. Printed with a 0.4mm nozzle at 0.10mm layer height</li><li>Added printable locking clip STL file to eliminate backlash in fitting/PTFE tube when pulled on</li><li>Print with single inlet side on the build plate. Add a 10mm brim to stabilize the print</li></ul><h3>Version 1</h3><h2>Background</h2>This allows you to run material from the AMS or external spool without having to disconnect the PTFE tubing.This uses push to connect fittings as you would see in a typical PTFE connector.&nbsp;<h3>Release Rings: QTY: 3 of PC4-UM2</h3>I do NOT recommend the printed release rings as they are too fragile and do not securely hold the PTFE tube into place.&nbsp;Amazon (<a target="_blank" href="https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1</a> )AliExpress (<a target="_blank" href="https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt" rel="nofollow noopener">https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt</a>)McMaster (<a target="_blank" href="https://www.mcmaster.com/5472K101/" rel="nofollow noopener">https://www.mcmaster.com/5472K101/</a>)<h2>Installation</h2>Push the retaining ring into each end. After you insert the PTFE tubing until it bottoms out, pull back so the release ring has a gap between it and the printed surface. Insert the locking clip into this gap and then push the PTFE back in so it seats. This removes any backlash so the end of the PTFE tube remains firmly in contact with the bottom of the bore.&nbsp;While not always required, I found it helps to countersink the PTFE tube entering the printer as it provides a lead-in to prevent snags.&nbsp;You also need to ensure the printer buffer operates as intended. The PTFE tube exiting the buffer needs to clear the AMS clip going into the back of the printer. This prevents any unwanted resistance to the buffer and let‘s it operate as intended. If not, you can see what looks to be like a partial clog or even failure to retract filament.

Over-Engineered Y-Splitter

Splitter

lukasglowinski

Printed with Fiberlogy PCTG and Silk PLA from Amazon.You may need support for the main part. Depending on your printer.Use adaptive layers for best result(main part) 0.2 layer height.

Voronoi soap dish

Vase

DutchWorkX3D

check my FB page https://www.facebook.com/groups/bambu3d4all There is a lot of info and help there ;-)&nbsp;I designed v3 from scratch based on the v2 version.It now has more strength and more place for honeycomb / hex add-ons.I have added:<ul><li>Honeycomb / Hex Ledstrip holder</li><li>Honeycomb / Hex Build plate holder</li><li>Honeycomb / Hex Top glass holder</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/176841/2023-09-27_0064ddb96eb55.gif">I have added the 3mf file with the settings, of course you can adjust to your own settings.I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the club as club members can be assured I follow up on their requests.If you like you can join my Bambu3D4All FB page https://www.facebook.com/groups/bambu3d4all/