dshively91

abactor81

Decorative Wall cubic Shelf.&nbsp;If you like this work, you can support me with a boost! Thanks.&nbsp;You can resize it to your liking in the slicer.

Decorative Cubic Wall Shelf

Home Items

TerTerro

Modular Outpost Terrain Can be mix and matched. Is designed for 28-32mm scale miniatures, just scale how you need it. Windows and doors are exchangeable, no supports needed.

Modular Outpost Terrain

TabletopGames

Jordan Proctor Designs

<h3>(2.0) Update: New versions to counteract the “benchy hull line”</h3><ul><li>If you&#39;re not sure what I mean by “benchy hull line”, <a target="_blank" href="https://help.prusa3d.com/article/the-benchy-hull-line_124745" rel="nofollow noopener">read this article. </a></li><li>I have rounded out the bottom interior of the planter to counteract the slight layer shift our indentation that occurs on the exterior wall as the printer completes the top layers of the bottom interior of the planter.</li><li>I have also adjusted my suggested print settings to reflect my current preferences.</li></ul><h2>Mid-Century Modern Planter</h2>This mid-century modern planter is the perfect size for small to medium sized succulents, cacti, or other houseplants. The unique design balances form with function, including drainage holes and an optional, custom-fitted drip tray.I have posted files for four sizes, small through XL. The pictured planter is the &#34;XL&#34; size.&nbsp;Small: 3&#34; height, 3&#34; opening Medium: 4&#34; height, 4&#34; opening Large: 5&#34; height, 5&#34; opening  XL: 6&#34; height, 6.5&#34; openingPrint Settings I Used:<ul><li>0.2mm layer height</li><li>10% infill</li><li>3 walls</li></ul>If you like this design, consider leaving a tip! I&#39;m a university student that designs planters on the side, so anything helps!<a target="_blank" href="https://www.paypal.me/theprintedplanter" rel="nofollow noopener">https://www.paypal.me/theprintedplanter</a>

Mid-Century Modern Planter Pot, with Drainage Tray

Planters

Bean Eating Cookies

Another Gnome set of cookie cutters and stamps!&nbsp;They are cutters and stamp separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out!&nbsp;If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>

Christmas Gnome Cookie Cutters and Stamps

Cookie Cutters

chiz_m

<h3>RELEASE HISTORY</h3>2023-12-17: Thinner version print profile added that may work better for others with printers that don&#39;t have the frames completely flushed. See Tips for Success section below for more details.2023-11-17: Version 2 - now covers the entire length of the lead screw and more rigid. Additionally, magnets can now be added.2023-11-12: Initial Release________________________<h3>If you find that this shield works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3>Grease from the z-axis lead screw would often get into hands/arms when getting finished prints from the printer.<h3>SOLUTION</h3>Design a shield that would cover the lead screws but not affect the printer functionality.<h3>IMPORTANT NOTE (Please read first!)</h3>As the tolerances in the assembled unit varies, this lead screw cover might not work on your printer. See item #1 below in the Tips for Success section. The left side of the printer has very little room to fit the shield and if you have a really skewed printer frame, the shield could rub against the print bed assembly. I noticed this difference between the two (2) X1C&#39;s that I have. You can try the thinner version as it might fit better to your unit over the regular version. Lastly, this requires a really calibrated filament for the part to fit. Over extruded filament will cause the part to be thicker and very tight while under extrusion would make the part thin and loose. Please do NOT rate the model low because it didn&#39;t fit well to your unit, which may have really skewed frame or your filament isn&#39;t calibrated correctly. A lot of people have successfully installed this shield and continue to use it today without issues.<h3>PRINTING DIRECTIONS</h3><ol><li>Print as oriented.</li><li>Model has built-in support. Remove supports after printing.</li><li>Part clips to the z-axis lead screw bearing mount. Optional: Add 8x3mm magnets.</li><li>Left and right shield are mirror of each other. Flip in the x-axis in the slicer to print the other. Alternatively, print using the provided left and right profiles.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/2023-11-17_e498439f53add.png"></figure><h4>TIPS FOR SUCCESS</h4><ol><li>Variances in the unit assembly. I found it myself that there are variances in the assembly of the units that may affect the fit of the shield esp. on the left side. See picture below. You can see on the left (blue) that the lead screw mount is flushed to the vertical post of the frame compared to the one on the right (light brown). This makes the shield pushed against the print bed support and might not fit well. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/c3bcc624-ac61-4c7f-be2c-e34a4ee3bf82.webp">  </li><li>Curved edge. If you happen to get the printed part from the print bed when it&#39;s not fully cooled down yet, you might have a curved edge. This will cause the print bed support to rub against the curved edge of the shield.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/bdaca8b8-c292-4044-8224-715515a9ba55.png"></li></ol><h3>MATERIAL RECOMMENDATIONS</h3><ul><li>Use high temperature resistant material like PETG, ASA or ABS as PLA might warp overtime.</li></ul>

Home Items

TabletopGames

Planters

Cookie Cutters

Bambu Mods