drdeason70

Print this/Print that

What better to display in your home than this 1955 Chevy sitting in the sunset. This is a 214x200 hueforge wall art piece.&nbsp;For this profile, you can use ams or color swap manually.Start with a darker silver (I used IIIDMax Silver PLA)At layer 12 swap to a lighter silver (I used Sunlu Silver PLA)At layer 16 swap to orange (I used Bambu Orange PLA)At layer 20 swap to yellow (I used Sunlu Pure Yellow PLA)At layer 21 swap to white for the remainder of the print (I used Sunlu White PLA)&nbsp;For print settings you will want0.08 Fine layer heightFirst layer at 0.16 layer height100% infill

1955 Chevy in the Sunset Wall Art Decor Decoration

hot rod

mgallimore32

T-Handle, Nut, Knob for a 3/8" Nut. Needed so i could easily remove the nut without the need for tools. &nbsp;Printed with high gyroid infill and more walls. Seems to be plenty sturdy for my use case.

T-Handle (3/8" Nut)

machine knob

Daann_ii

A REMIX KEY-CHAIN VERSION CAN BE FOUND HERE: https://makerworld.com/en/models/502493 This articulated jumping spider comes in two versions.  The first is a single model with eyes. The second version has eye holes and you can either print the eyes separate in a different color or use flat-back beads. You will notice that both models have a small hook near the butt so that you can make these into key chains or hang them.   The models also will show 3 disc shapes near the legs.  These are 1 layer high.  If you use a brim ( which I recommend) these discs will help create a stronger brim to hold the legs securely while printing.  (see picture) If someone wants a version without the discs, let me know but I think most people will find them useful.  Alternatively you could lower the model into the build plate by your layer thickness and they would disappear. As for scaling.  This model can be shrunk a little bit but I would recommend looking at your slicer to see when the parts start fusing to determine how small you can print. This model is 100% my own creation and I give the following permissions: You can: Sell printed models (online or locally) Create remix versions with attribution Please don&#39;t: Sell the model files Claim the model as your own Claim remixes as solely your own If you want to make a remix and would like my Blender file with all of the parts separated, send me a message on instagram @daann_ii

Articulated Jumping Spider

spider

Makkuro

A keychain with your or your family/friends first name, written in individual letter beads. The beads are free to rotate and move after printing, so its also good for fidgeting.  Note that this model is print-in-place, so no support material is needed.STLs for more than 1200 first names are included. Hint: To get all versions as STL, use “Download STL” above and get the .zip.&nbsp;Also there are several examples included, where the beads show 4 different words. So when you rotate the beads, you can create different words:<ul><li>print - layer - build - dream</li><li>tiger - horse - zebra - otter</li><li>love - kiss - wish - hold</li><li>silence - balance - essence - journey</li><li>Lucy - Jake - Emma - Alex</li><li>… and you can create your own using OpenSCAD</li></ul><h4>Customizing</h4>The 4 names shown are configurable with OpenSCAD. To do that, please install <a target="_blank" href="http://www.openscad.org/" rel="nofollow noopener">OpenSCAD</a> on your own computer and follow the detailed customizing instructions below or follow these <a target="_blank" href="https://www.dr-lex.be/3d-printing/customizer.html" rel="nofollow noopener">in depth instructions</a>.You can either show the same name on all 4 sides (all=&#34;Franziska&#34;) or 4 different words (text=[&#34;Print&#34;,&#34;layer&#34;,&#34;build&#34;,&#34;dream&#34;];). Just the first word however is setting the number of characters, so put the longest word first.<h4>Print-in-place</h4>The model does not need support material at all. The “rod” is printed and rests on the plastic of the letter beads below. The rod does not stick to the beads as there is an air gap.Make sure you have a fan which cools the printed plastic when it exits the nozzle (always available if you have a Prusa or another recent 3D printer).In case the beads stick to the rod, just rotate / move them a bit and they will get free.<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_ztgg7s2raop4.png"></figure><h4>Multicolor</h4><a target="_blank" href="https://www.printables.com/@MichalPesek" rel="nofollow noopener">MichalPesek</a> had the great idea to print the model with filament change, leading to a way cooler keychain! (The black &amp; yellow one shown in the main picture above)You can achieve this by changing filament at 0.8mm and 9.6mm in the slicer.<h4>Share your make</h4>If you could take a picture of an actual print, please &#34;Comment&#34; and attach the picture. - I am curious to see your uses in the wild!  Also please leave a review with stars. If the option does not show up, make sure to download the model when you are logged in with your user and after a while the rating option will appear.<h4>Other models</h4>There are more keychains available, the <a target="_blank" href="https://makerworld.com/en/models/437072" rel="nofollow noopener">keychain name tags</a><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_v8luunt8xmpk.webp"></figure>the <a target="_blank" href="https://www.printables.com/model/611532-wobbly" rel="nofollow noopener">wobbly</a><a target="_blank" href="https://www.printables.com/model/611532-wobbly-letter" rel="nofollow noopener"> letter</a><a target="_blank" href="https://makerworld.com/en/models/436881" rel="nofollow noopener"> cube</a><a target="_blank" href="https://makerworld.com/en/my/models/436881" rel="nofollow noopener"> keychain</a><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_kezhwu2iibrf.gif"></figure>the <a target="_blank" href="https://makerworld.com/en/models/437009" rel="nofollow noopener">shopping cart coin</a><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_1blr33xyp6wg.webp"></figure>the <a target="_blank" href="https://makerworld.com/en/models/436888" rel="nofollow noopener">chain of letters</a><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_fk0mv9n63eti.webp"></figure>the <a target="_blank" href="https://makerworld.com/en/models/436986" rel="nofollow noopener">working keychain cannon</a><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_ubghdx2g9083.webp"></figure>and the <a target="_blank" href="https://www.printables.com/model/23421customizable" rel="nofollow noopener">customizable</a><a target="_blank" href="https://makerworld.com/en/models/436388" rel="nofollow noopener"> bottle opener keychain</a>:<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436858/design/2024-04-07_uftuw8kvo39r.webp"></figure>There are more <a target="_blank" href="https://makerworld.com/en/@Makkuro/collections/1129644" rel="nofollow noopener">configurable-text-based creations</a> available. Please have a look at all my <a target="_blank" href="https://makerworld.com/en/@Makkuro" rel="nofollow noopener">creations</a>. Have fun!<h4>Credits</h4>Thanks go out to <a target="_blank" href="https://www.printables.com/@MichalPesek" rel="nofollow noopener">MichalPesek</a> for the multicolor print and nice picture!<h4>Detailed customizing instructions</h4><ul><li>Download latest version of OpenSCAD, (See section &#34;Development snapshots&#34; at (<a target="_blank" href="https://www.openscad.org/downloads.html" rel="nofollow noopener">https://www.openscad.org/downloads.html</a>) )</li><li>Download the &#34;LetterCubesKeychain_V5_FourDifferentNames.scad&#34; file from here.</li><li>Open the .scad file in OpenSCAD.</li><li>Change the variables to your liking:<ul><li>To display the customizer, in the OpenSCAD &#34;View&#34; menu, the option called [Hide customizer] must be unselected.</li><li>Alternatively, change variables in the code: You find the variables in the beginning of the .SCAD file: If you want the same text on each side of the cubes: text=[&#34;Franziska&#34;,&#34;Franziska&#34;,&#34;Franziska&#34;,&#34;Franziska&#34;]; or if you want different text: text=[&#34;Print&#34;,&#34;layer&#34;,&#34;build&#34;,&#34;dream&#34;];</li></ul></li><li>For fonts:<ul><li>Set the fontname (and ensure you have that font installed on your system): fontname=&#34;Bangers&#34;;</li><li>The current font is “Blocktastic”, available online</li></ul></li><li>Press &#34;F5&#34; to get a quick preview.</li><li>Press &#34;F6&#34; when you like the preview. This will render the geometry and takes a little time.</li><li>Press &#34;F7&#34; to save the geometry to an .STL file.</li><li>Slice and print the .STL file.</li></ul>Some Fixes if you have issues with OpenSCAD: 1) Your font of choice is not found by OpenSCAD on your PC.<ul><li>In case you miss some fonts in OpenSCAD, download them from google: <a target="_blank" href="http://www.google.com/fonts" rel="nofollow noopener">http://www.google.com/fonts</a></li><li>e.g. for &#34;Bangers&#34; here: <a target="_blank" href="https://fonts.google.com/specimen/Bangers" rel="nofollow noopener">https://fonts.google.com/specimen/Bangers</a></li><li>Install all the fonts you want to use. Then restart OpenSCAD.</li></ul>2) OpenSCAD won&#39;t pick up newly installed fonts in C:/Windows/Fonts.<ul><li>In case new fonts are missing, put the font TTF files also in C:\Program Files/OpenSCAD/fonts/Liberation-2.00.1/ttf and restart OpenSCAD again.</li><li>Alternatively, put them in C:\Program Files/OpenSCAD/fonts/Lib</li></ul><h4>Names included</h4>Here I list all the Czech, German and English names availabe as STL files. The names are included here so people using this site find this print and the STL when searching for their name. Aaron, Abigail, Adam, Adela, Adrian, Adrien, Agathe, Alan, Albert, Ales, Alex, Alexander, Alexandra, Alexandre, Alexia, Alexis, Alfred, Alice, Alicia, Amanda, Amandine, Amber, Amelie, Amy, Anais, Andre, Andrea, Andreas, Andrew, Aneta, Anette, Angela, Angelika, Anja, Anke, Ann, Anna, Anneliese, Annette, Anthony, Antje, Antoine, Arnaud, Arthur, Ashley, Astrid, Audrey, Aurelie, Aurelien, Aurore, Austin, Axel, Baptiste, Bara, Barbara, Bastien, Beate, Ben, Benjamin, Benoit, Bernd, Berndt, Bernhard, Bernt, Bettina, Betty, Beverly, Billy, Birgit, Björn, Bobby, Brandon, Brenda, Brian, Brigitte, Britta, Brittany, Bruce, Bryan, Bärbel, Camille, Carin, Carl, Carla, Carol, Caroline, Carolyn, Carsten, Catharina, Catherine, Cathrin, Catrin, Cecile, Cedric, Celia, Celine, Charles, Charlotte, Cheryl, Chiara, Chloe, Chris, Christa, Christel, Christian, Christiane, Christina, Christine, Christoph, Christopher, Claire, Clara, Claudia, Claus, Clemence, clement, Coline, Coralie, Corentin, Cornelia, Curt, Cynthia, Cyril, Dagmar, Damien, Daniel, Daniela, Danielle, David, Deborah, Debra, Denisa, Denise, Dennis, Detlef, Detlev, Diana, Diane, Dieter, Dirk, Dominick, Dominika, Donald, Donna, Dorian, Doris, Dorothy, Douglas, Dylan, Edith, Edward, Elena, Elfriede, Elias, Elijah, Elisa, Elisabeth, Elise, Eliska, Elizabeth, Elke, Ella, Ellie, Elodie, Elsa, Emeline, Emil, Emilia, Emilie, Emily, Emma, Enzo, Eric, Erica, Erich, Erika, Erna, Ernst, Erwan, Erwin, Estelle, Ethan, Eugene, Eva, Evelyn, Evzen, Fabien, Fanny, Filip, Finn, Florent, Florian, Frances, Francesco, Francois, Frank, Franz, Frida, Frieda, Friedrich, Fritz, Gabriel, Gabriele, Gaetan, Gary, Georg, George, Gerald, Gerd, Gerda, Gerhard, Gerhardt, Gert, Gertrud, Gisela, Gloria, Grace, Gregory, Gudrun, Guillaume, Günter, Günther, Hana, Hannah, Hannelore, Hans, Harald, Harold, Hartmut, Heather, Heidi, Heike, Heiko, Heinrich, Heinz, Helen, Helene, Helga, Helmut, Helmuth, Henry, Herbert, Hermann, Herta, Hertha, Hildegard, Holger, Honza, Horst, hugo, Ilse, Ines, Inge, Ingeborg, Ingo, Ingrid, Irmgard, Irmgart, Isabella, Ivonne, Jack, Jacob, Jacqueline, Jade, James, Jan, Jana, Janet, Janice, Jason, Jean, Jeanne, Jeffrey, Jennifer, Jens, Jeremy, Jerome, Jerry, Jesse, Jessica, Jirka, Jitka, Joachim, Joan, Joe, Joerg, Johann, Johanna, Johannes, John, Johnny, Jonathan, Jordan, Jose, Joseph, Joshua, Joyce, Juan, Judith, Judy, Julia, Julie, Julien, Juliette, Justin, Justine, Jutta, Jörg, Jörn, Jürgen, Kai, Karel, Karen, Karin, Karl, Karolina, Karsten, Katarina, Kate, Katharina, Katherine, Kathleen, Kathrin, Kathryn, Katie, Katja, Katrin, Katrina, Kayla, Keith, Kelly, Kenneth, Kerstin, Kevin, Kimberly, Kirsten, Klara, Klaudia, Klaus, Krista, Kristian, Kristina, Kristine, Kuba, Kurt, Kyle, Käte, Käthe, Laetitia, Larry, Lars, Laura, Lauren, Laurie, Laurine, Lawrence, Lea, Lena, Lenka, Leo, Leon, Liam, Lieselotte, Lina, Linda, Lisa, Logan, Loic, Lola, Lothar, Lou, Louis, Louise, Luca, lucas, Lucie, Lucy, Lukas, Madison, Maelle, Maeva, Maik, Maike, Manfred, Manon, Manuela, Marc, Marcel, Marco, Marcus, Marek, Maren, Margaret, Margarete, Margarethe, Margaux, Margot, Maria, Marianne, Marie, Marilyn, Marina, Marine, Mario, Marion, Mark, Marketa, Marko, Markus, Marlies, Marlis, Marta, Martha, Martin, Martina, Mary, Mathew, Mathias, Mathieu, Mathilde, Mathis, Matteo, Matthew, Matthias, Matthieu, Max, Maxence, Maxime, Megan, Mehdi, Meik, Meike, Melanie, Melissa, Mia, Michael, Michaela, Michal, Michelle, Mickael, Mike, Mila, Mohamed, Monica, Monika, Morgane, Nadin, Nadine, Nancy, Natalie, Nathan, Nicholas, nicolas, Nicole, Niels, Nikol, Nils, Nina, Noah, Noemie, Norbert, Oceane, Olaf, Oliver, Olivia, Ondra, Ophelie, Otto, Pamela, Patricia, Patrick, Paul, Pauline, Pavel, Pavlina, Peter, Petra, Philip, Philipp, Phillip, Phillipp, Pierre, Quentin, Rachel, Radek, Rainer, Ralf, Ralph, Randy, Raphael, Raymond, Rebecca, Regina, Reiner, Reinhardt, Remi, Renate, Rene, Richard, Rita, Robert, Robin, Roger, Rolf, Romain, Romane, Ronald, Rose, Rosemarie, Roy, Rudolf, Rudolph, Russell, Ruth, Ryan, Rüdiger, Sabine, Salome, Sam, Samantha, Samuel, Sandra, Sara, Sarah, Scott, Sean, Sebastian, Sebastien, Sharon, Shirley, Siegfried, Sigrid, Silke, Silvia, Simon, Simona, Sofia, Solene , Sonja, Sophia, Sophie, Stefan, Stefanie, Stephan, Stephanie, Stephen, Steven, Susan, Susanne, Sven, Swen, Sylvia, Tanja, Teresa, Terry, Theo, Theresa, Thibault, Thibaut, Thomas, Thorsten, Tim, Timm, Timothy, Tobias, Tom, Tomas, Tony, Torsten, Tristan, Tyler, Ulrich, Ulrike, Ursula, Ute, Uwe, Valentin, Valentine, Veronica, Victor, Victoria, Vincent, Virginia, Vojtech, Volker, Walter, Walther, Waltraud, Wayne, Werner, Wilfried, Wilhelm, Willi, William, Willie, Willy, Wolfgang, Yann, Yvonne, Zachary, Zoe, Zuzana.

Letter bead keychain (configurable)

Names

RuralRoots3D

<div><h1>Summary</h1><div>This is a scan of a small decor item I have. I used photometry and processed this one to be in a printable format! If you print this supports will be needed, let me know if you make it! I hope y'all enjoy!(ZIP file contains obj and the mesh images)</div></div>

Eagle Feeding Chicks in nest

eagle

SugarPaws3D

Daisy is a lovable cow with a heart as big as a field of daisies. She spends her days frolicking in the sunshine, munching on crunchy apples, and spreading kindness wherever she goes with her gentle moo. ✿&nbsp;Features: a sit or lie down position, articulated tail, movable head, and two flowers accents on her ears ✿&nbsp;Be sure to check out Max the Cow as well (˶ᵔ ᵕ ᵔ˶)&nbsp;These cows are my first go at a flexi toy so please leave me feedback so II can continue to improve my work!&nbsp;&nbsp;

Daisy the Flexi Cow - Print in Place Articulated

articulated 

Litolunar

Discover the newly improved version of Lea the Truck 🚛, the toy that kids will adore! This remix edition, designed by the original creator, features reinforced fenders 🛡️ for added durability and a sturdy base 🏗️ for optimal stability. The most exciting part is the innovative wheel mounting system 🔄, with two threaded bars of metric 3 and blind nuts, designed to prevent axle breakage. Guaranteed fun with Leo more resilient than ever! 🎉&nbsp;**New Feature**: Model comes separated into parts for easy assembly.&nbsp;I fully understand and respect your license terms for the designs by the original creator. I will not sell printed models based on your design on platforms like Etsy, Facebook, or eBay.&nbsp;Instructions: - The front metric 3 bar should measure 5.7 mm in length. - The rear metric 3 bar should measure 5.7 mm in length.Guaranteed fun with Leo more resilient than ever! 🎉&nbsp;You will need to cut two threaded metric 4 bars and four blind nuts for assembly.

Lea the Truck

vehicles

Black Jack

This is a very small and simple model. Apart from the images this cute tractor can be printed in small pieces with minimal effort and resources. The final assembly may need a tad bit of glue but these are simple and self explanatory.There are two ways to print this.<ol><li>As single piece:- Please download STL file but there wont be any movements.</li><li>As multiple pieces :- THE PREFERRED WAY. ALSO SIMPLE & EFFICIENT Please download 3mf file. You can use the same 3mf file as manual for assembling. You may need screws and or glue to complete assembly. Also you may have to scale up the model to get the full play but make sure you dont lose the wall thickness and tolerance.</li></ol>Supports should be provided as required.Appreciate the makes uploads.Open for suggestions.Candy is the series I plan to do with such cute things. But if you want more details, please do ask.<a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/560550/rich_content/83013dfa-a69d-4e74-b1de-2930ec2331bf/image.png#%7B%22uuid%22%3A%22fbe0b012-08e0-4fd5-aad3-4e10d22bee1a%22%2C%22w%22%3A260%2C%22h%22%3A73%7D"></a>  <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/516435/2024-02-10_f86e8494fe8e4.png"></a>Category: Vehicles

Candy Tractor with Movements

TRACTORS

Norris Creations

This model replaces the dashboard inset on a Dodge Ram 1500. It is used to either hold a phone or pair of sunglasses or whatever you&#39;d like to stay on your dash.&nbsp;To install remove the rubber bottom and two screws. Replace with this model and attach using the screws that you just removed.&nbsp;Since this is going into a car I suggest using PETG however I used PLA in these images.

Dodge Ram 1500 Dashboard Plate

Hendrik3D

Meet the PurgeTeam: our little helpers that keep your printer area clean! They are strong and can carry a lot filament purge. Depending on your amount of purge you may need a bigger team. ;-)

PurgeTeam

poop

vit.vkh

A small cluster of rocks that can give cover to your players.&nbsp;Original model: https://www.thingiverse.com/thing:2203273

Cluster of Rocks

platforms 

michaelburger

this is a small wizard horse small cute lacks brain cells.

wizard horse

horse

mrmila

This is not my model…. but it's a shame it's not here.My print, my video… <a href="https://www.youtube.com/shorts/y7_rashMtlM" rel="nofollow">https://www.youtube.com/shorts/y7_rashMtlM</a>&nbsp;SummaryThe construction is very stable and light due to the wave shape. For optimum pressure equalization, it is not closed in the middle. The wind turbine starts to turn in very light wind. Last time there was a storm with gusts up to 120 km / h, without problems for the windmill. The wings are 0.8mm thick and optimized for printing with a 0.4mm nozzle. The windmill is designed to print upside down.windmill to use with 2x 608 ball-bearings. Turn 180 ° to print. Print with low speed.Update: stabilizer added in the middle. Update 2: stabilizer is now thinner for more space on the axle Update 3: Vase mode version uploaded <a href="https://www.thingiverse.com/thing:2799131" rel="nofollow">https://www.thingiverse.com/thing:2799131</a> and low poly <a href="https://www.thingiverse.com/thing:2799241" rel="nofollow">https://www.thingiverse.com/thing:2799241</a> <a href="https://youtu.be/EDNsvfZPi5I" rel="nofollow">https://youtu.be/EDNsvfZPi5I</a>Print SettingsRafts:Doesn't MatterSupports:Doesn't MatterResolution:0.3Infill:100Notes:turn 180 ° to print for 0.4mm nozzel

Vertical Windmill Helix

wind powered 

Heronidas

Sitzbeine für handelsübliche Klötzchen zur Erstellung einer Deko- Bank. Die Aussparungen haben die Maße 23mm x 8,6mm, aufgrund der toleranzen der Hölzer, Sitzfläche ist 42mm hoch&nbsp;2 Versionen sind verfügbar, einmal Breit und einmal Schmal&nbsp;Hier gibt es den passenden Tisch http://makerworld.com/en/models/405492#profileId-307342und eine Sitzbank ohne Rückenlehne  <a target="_blank" href="https://makerworld.com/en/models/405028#profileId-306858" rel="nofollow noopener">http://makerworld.com/en/models/405028#profileId-306858</a>&nbsp;der Hase ist von https://makerworld.com/en/models/244249#profileId-260762

Sitzbeine Bank

furniture 

LinkDesigns

<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/155573/2023-11-07_qsrc0l2l3i3m.gif"></figure>I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and stacked as well! This model can be scaled up or down to preference, but be sure your build plate adhesion good. If you want to test this print with a smaller one first, there's a standard size model included. &nbsp;Happy printing!&nbsp;If you like this fidget, consider checking out my Finger Slinger design as well! <a target="_blank" href="https://makerworld.com/en/models/58825#profileId-63053" rel="nofollow noopener">Finger Slinger - Print In Place Spinning Fidget by LinkDesigns - MakerWorld</a>&nbsp;

Hexagon Superfidget - 35 segment PIP design

fidget

tundra3866cda

Milwaukee saw blade clock that is easy to scale to whatever size you want. Purposely left for scaling up/down depending on the clock hands you choose to attach. Hands are included with this face and can be scaled to whatever you size the face, You would need to source the mechanism/hands and come as a package, in a lot of many, many ads: <a target="_blank" href="https://www.amazon.com/dp/B07T6HG5WZ/?coliid=I3M3YOFHBG7QL9&colid=MUC76FRQJ2RS&ref_=list_c_wl_lv_ov_lig_dp_it&th=1" rel="nofollow noopener">Amazon.com: EMOON Clock Movement Mechanism with 3 Pack Clock Hands, Silent Sweep Quartz Clock Motor Kit, for Clock Repair DIY Replacement, Custom Clock : Tools & Home Improvement</a> for just a sample of what is available. I would go for a set of white or gold hands to better contrast against the red face of the clock. Jet black may look good also, again left open for your make.

Milwaukee Saw Blade Clock Customizable

Tri-3D

Can be printed with 2 walls… But 3 give more strength Also 5% infill works well. Increase for more strength For Commercial Rights To This Model: https://www.patreon.com/Tri_3D

Cracked Dragon Egg Bowl

egg holders

Antonio

A simple tool for finding the center of round objects.Simply place it on the object with the arms touching its edge, and draw two perpendicular lines using the guide.

Circle Center Finder

Tools

IXPatch

This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of the geometry necessary for the ball joint is already there thanks to the underlying "Ancient Core". So getting the head to rotate was basically just a matter of chopping it off and connecting it to the core.I also tweaked the overall proportions a little bit and remodeled the claws to more closely match the Guardian's in-game design. They are a bit of a torture test for your printer now, but definitely printable.In addition to the single-color version, there's also a painted multicolor version. Enjoy :)

Flexi Guardian - Rotating Head Remix (Zelda Breath of the Wild)

steampunk 

euosJad

🐦 Presenting a 3D printable bird feeder model, thoughtfully designed to blend seamlessly into any outdoor space while providing a haven for your feathered companions.&nbsp;✨ Crafted with practicality in mind, this feeder features a two-part design that can be printed without the need for support materials, ensuring a straightforward printing process and hassle-free assembly.&nbsp;🌧️ Never worry about inclement weather affecting your avian visitors. The feeder includes a discreet drain to safeguard against rainwater accumulation, guaranteeing a comfortable dining experience year-round.&nbsp;🎨 With separate printing options for the house and roof components, you have the flexibility to customize your feeder with a touch of personal flair, while maintaining an elegant and cohesive look.&nbsp;⚙️ Engineered for compatibility with a 150x150x150mm 3D printer, this model can be effortlessly scaled up for larger prints, offering versatility to suit your space and requirements.&nbsp;🔩 Hanging your feeder is a simple affair, requiring just a single screw for secure installation, allowing you to enjoy the tranquil presence of birds in your garden without fuss or complication.&nbsp;🌟 Enhance your outdoor ambiance and foster a connection with nature with our understated yet functional 3D printable bird feeder model. Download now and create a welcoming sanctuary for wildlife in your own backyard.

Bird Feeder

bird feeder

MV design

Dino - triceratops

simple animals 

Rushifa

<a target="_blank" href="https://cults3d.com/en/3d-model/art/star-wars-3d-logo" rel="nofollow noopener">Free STL file ⭐⭐⭐⭐⭐ Star Wars - 3D logo ・Model to download and 3D print・Cults (cults3d.com)</a> original model here !

Star Wars logo 3D Colored

logos 

FelixL

A bat that can be suspended through a ring in the back. I also included the STL without the ring. The STL files were scaled to 12% in my print profile.&nbsp;Modelled in Blender (.blend file included)&nbsp;Wingspan of 195mm (though it could be scaled up quite a bit if needed)

Suspended Bat Model

davidkelly021

Christmas snowball town holes modelled to allow micro led string lights to be inserted into the house of the town, space in the base of the model for a battery pack

Christmas snow ball town

CHRISTMAS 

3DPmom

<figure class="media"><div data-oembed-url="https://youtu.be/1RCOVTLtOgA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/1RCOVTLtOgA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Here is a St. Patrick's Day pot of gold with a little extra treasure inside 🌈 When assembled, this slinky gains a bit of a yo-yo/kendama vibe 😂 It is actually really fun to play with and only requires simple assembly (gluing).&nbsp;3D PRINTING SETTINGS:Layer Height 0.2mmPLA works greatNo Supports needed.15-20% Infill&nbsp;Note: When you go to preview the slinky in Bambu Studio you will get a warning that states: “Warning: It seems object POG Small (or Large) Slinky has floating cantilever. Please re-orient the object or enable support generation.” You can ignore this warning. The program is recognizing the space between each layer of the slinky. That ‘space’ is intentional and necessary to be able to separate the slinky when it is done printing. It will print fine without supports:)&nbsp;Tip: I recommend multicolor filament (dual-color or tri-colored filament) or rainbow colored filament for the slinky. I used rainbow colored filament but just a heads up: to get all the colors of the rainbow in there I had to print 5-6 at a time because the color repeat on my spool was about 200g (the small slinky is ~32g and the large slinky is ~47g).&nbsp;Dimensions of Large Pot of Gold Slinky: 3 ½ in. x 3 in.Dimensions of Small Pot of Gold Slinky: 3 in. x 2 ½ in.&nbsp;How to assemble:Step 1: First, gently separate the layers of the slinky. After printing they will be lightly connected together. Gently separate them with your fingers or a non-sharp object like a butter knife. (See photo)Step 2: Next, super glue the pile of gold piece to one end of the slinky. (See photo)Step 3: Super glue the other end of the slinky to the bottom of the pot. This piece is loose inside the pot but is too big to come out. Set the pot on a small object (I used a spool of thread) to raise up the ‘bottom’ piece of pot. Apply glue to the bottom of the slinky and then attach it to the bottom piece of the pot. Setting it on a bottle/spool isn't necessary but it makes the gluing process a little easier. (See photo)&nbsp;Have fun printing!🍀

Pot of Gold Slinky (2 Sizes)

st Patty's day

user_571986032

Flexi donkey

Depot stuff

Rober7Crow

Again, a new challenge started, and when I saw it I said to myself this is impossible.I started thinking and it occurred to me that Easter is coming soon and with it comes the Easter Bunny.First I made the model, then I tested it and then I made the kit card.I hope you enjoy playing with it. Or you can use it as a tag for your school bag.It works without glue, but if you are going to wear it on your bag I recommend to glue it. You can see how to assemble it in the pictures below :) <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577905/2024-02-24_fad7039445506.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577905/2024-02-24_e5df739b36404.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577905/2024-02-24_c29185c57f625.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577905/2024-02-24_2234060a3668d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577905/2024-02-24_02f0cf3897ed3.jpg"></figure>

Kit card easter bunny

easter

Nakozen

Space: the final frontier. These are the voyages of the Starship Enterprise. Its five-year mission: to explore strange new worlds. To seek out new life and new civilizations. To boldly go where no man has gone before!First of the upcoming series of new sci-fi kits is of course the NCC-1701 Enterprise from Star Trek the Original Series.<a target="_blank" href="https://www.thingiverse.com/thing:4601489" rel="nofollow noopener">Find TNG's NCC-1701-D Enterprise kit here!</a>Two versions of the kit are included, one with a hanging loop and another without, alongside the individual part files. UPDATE 12/12/22: Version 2 has been added along with a tighter variant (labelled ‘Ti’)!------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. The model parts are 1.8mm high, which is not divisible by 0.16 for example!Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive! Makes greatly appreciated, always glad to see them! Happy Printing!------------------------------------------------------------Interested in selling? All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a>

NCC-1701 Enterprise Kit Card

Star Trek

JF-699

I hope you enjoy the Star wars C-3PO art I made! This is the sixth in a series of AI generated images I am turning into 3d prints! This can be taped to a wall, or stand on a door ledge, desk, or book shelf. It is 1.2mm thick.&nbsp;Thanks for looking at the model!Generated with AI - Microsoft Bing Copilot - Image Creator

C-3PO - 2d silhouette - AI Generated

Star Wars

berri3D

Have you ever pined for a picture perfect Thanksgiving candlelit dinner with a whole turkey to yourself but without all that cooking nonsense? Now you can print your own!&nbsp;This card kit makes everything you need for a fancy dinner at home or on the go. Nothing expresses gratitude like an extruded turkey.<ul><li> Great for Thanksgiving favours</li><li>Multicolour ready</li><li>Bonus card kits: extra place setting and fancy platter with carving utensils</li></ul>Please see below for important printing and assembly instructions.<h3>Trouble? Questions? Comments? Please don't hesitate to get in touch!</h3><h2>Happy Thanksgiving!</h2>Disclaimer: berri3D makes no claim that this card kit or the turkey made from said card kit is, in fact, edible. Furthermore, berri3D cannot be held responsible for strange looks or scoffing in your general direction by relatives and/or passersby if you randomly shout “I have a turkey in my pocket!” whilst waving the card kit about.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545098/2023-11-09_14223b88a6a3a.png"></figure><h2>Tolerances and fit</h2>Differences in printers and filament profiles can mean the difference between card kit pieces fitting together or not fitting together.&nbsp;The best way to determine which profile works best for your printer and filament is to print the Tolerance Test. This test is included in all profiles.&nbsp;After printing the test, determine which size works best: Regular or Tight. The following are guidelines only and may be different depending on your circumstances:<ul><li>Regular: 0.1 mm tolerance for default (non-calibrated) filament profiles (X1 series and P1 series) and non-Bambu printers</li><li>Tight: 0.0 mm tolerance for A1 mini printers and for calibrated filament profiles (X1 series and P1 series).</li></ul>Pieces should fit snugly together but not be too tight or too loose. If you find that neither size works for you, you can further adjust <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">X-Y contour compensation</a> or <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener">filament flow ratio</a>.<h2>Assembly Instructions</h2>Assembly is easy as long as you first identify the middle body part (it's the largest) and install the cross connectors in the right order. The connector with the thickest “ledge” is for the drumsticks and goes at the narrowest end of the body. The connector with the thinnest “ledge” is for the wings and goes at the opposite end. The wings and drumsticks can be a bit fiddly but should slide on.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545098/2023-11-07_acee8b62d46d1.jpg"></figure><h2>Print Settings</h2>The .3mf files include my recommended print settings:<ul><li>Flushing Volumes: optimized for each printer to reduce waste; you may need to recalculate depending on whether your own filament colours are darker or lighter than mine.</li><li>Nozzle size: 0.4 mm (don't change as it may prevent pieces from fitting together)</li><li>Layer height: 0.2 mm (don't change as it may prevent pieces from fitting together)</li><li>First layer speed: 15 mm/s (slow to prevent small details from coming loose from the plate)</li><li>Wall order: inner, outer, infill</li><li>Wall generator: Classic (don't use Arachne because it will throw off the tolerances)</li><li>Brim: none</li></ul><h2>Filament settings</h2><ul><li>The “regular” sized model has been tested using the default uncalibrated “Generic PLA” preset with multiple filaments from various manufacturers. </li><li>The “tight” sized model is ideal for the A1 mini (as it has a reduced filament flow) or if you've calibrated your own filament. I found that using 0.95 flow ratio on my X1C provided a decent top surface but pieces still fit well.</li><li>If you're using a custom filament preset, your results may vary.</li><li>Display models were printed in PLA as follows: White (Overture), Glorious Gold (Spectrum), Light Brown (eSun), and Magic Silver (Sakata 3D).</li></ul><h2>Multicolour</h2><ul><li>Only one AMS needed</li><li>Optimized for painting if you wish to change colours from my own</li><li>Please DON'T print your multicolour masterpiece without first printing the tolerance test!</li><li>Print four at a time to reduce filament waste (X1C and P1P/S only; A1 mini can only fit one)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545098/2023-11-09_14223b88a6a3a.png"></figure><h2>About the model</h2>I started on an “alive” turkey card kit shortly before Canadian Thanksgiving. It didn't look very good and I had to put it on the back-burner. Though our thanksgiving is long since past, I still wanted to make something so my American neighbours could print something for their own celebrations. So I pulled it off the back burner, fired up the design oven and out popped a roast turkey card kit.&nbsp;Why did I also make a fancy candle holder, plate, utensils, platter, and carving knife? Because I need to get out more?<h2>How to Support Me</h2>If you like what I make, I would love it if you would please click the like button and/or download a print profile. If you really like what I make, then please consider<a target="_blank" href="https://ko-fi.com/berri3d" rel="nofollow noopener"> buying me a coffee</a>. Every little bit counts!<h2>Licensing</h2>This kit is non-commercial and may not be sold, reproduced, or shared outside of this website. However, I will consider an individual license fee if you wish to sell printed models in your local area such as at a craft show. Please contact me for details.<h3> </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/545098/2023-11-09_14223b88a6a3a.png"></figure><h3>Changelog</h3>January 8, 2024<ul><li>Updated description to align with changed MakerWorld TOC</li></ul>November 10, 2023<ul><li>Changed name of model and added new tags</li><li>Updated cover photo</li></ul>&nbsp;November 9, 2023<ul><li>Initial upload</li></ul>

Thanksgiving Turkey Dinner Kit Card

Thanksgiving

Lucid Prints

Printed on an X1C with a 0.4mm hot end. Made with HUER FORGE.

Smoking Gnome HUEFORGE

HueForge

ncarrier25

These are 3 different great lithophanes to decorate a tree during the holiday season. These bells print great with Bambu White but it is recomended to use Eryone White if available. The hole in the top of the bells should be sized to fit “most” small lightbulbs found during the holiday season. You can always scale to adjust for bulbs of your choice! Enjoy and thanks for looking!!

3 Lithophane Christmas Tree Bells 

Christmas

DonMatis

In the frame series next member is the Undead PirateHope you like it and looking forward to see your makes :DPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA+ Sunlu White</li></ul>Swap Instructions (but feel free to use less colours or different) : Start with Black<ul><li>At layer #6 (0.56mm) swap to Cement Gray</li><li>At layer #8 (0.72mm) swap to Grey</li><li>At layer #12 (1.04mm) swap to Light Gray</li><li>At layer #16 (1.36mm) swap to Bone White</li><li>At layer #17 (1.44mm) swap to White for the rest.</li></ul>

Undead Pirate in the frame

benchies

ShakaStudio

&nbsp;Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mmFilaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Night Gray Transmission Distance: 0.8 PLA+ Creality Orange Fluorescent Transmission Distance: 3.6 PLA+ JAYO Meta White Transmission Distance: 6Swap Instructions: Start with Black At layer #5 (0.88mm) swap to Night Gray At layer #6 (1.04mm) swap to Orange Fluorescent At layer #10 (1.68mm) swap to White for the rest.

Halloween Mansion - 4 Color Hueforge Filament Painting

Halloween 

bollekeil

This is a very simple kit to print yourself a cute BD1 :) Thanks to AMS, in four colors.&nbsp;I have only colored the model in detail and therefore only provide a 3mf file. I worked on it for a long time to generate as little purge as possible, but still get a perfect result. I used original BambuLab colors (white, silver, red, black).&nbsp;The parts can then be easily put together (see attached PDF from fixumdude). I recommend additionally gluing them in place to get a stable model.&nbsp;Height when assembled:Up to the head: approx. 12cm With antennas approx. 14cm

BD1 Kit coloured - Star Wars

robots

Golem671

I created a new pipe for the 5015 fan. It is printed without supports. On the triangular surface where the fan is mounted. This one is with ball bearings. The flow is much better than with the original fan. The fan is at an angle. It should improve airflow. I used new M3 screws, 8-10mm for holder, 22-25mm for fan. I heated one nut (or threaded insert) and put it in the prepared place. I will edit over time. The fan is turned upwards so that it does not suck warm air from the bed.

5015 Fan duct for Sidewinder X2

Printer Parts

Maty505

third version of my articulated crystal dragon.  shorter body and longer tail. body parts are also improved. the model is prescaled and i wouldnt recommend to scale down, i tried smaller, as shown on the photos and it was still pretty good, but for better quality dont scale down.

Articulated Crystal Dragon

dragons

Waffly3D

Cute Fox I modeled using Blender 4.0!Printing Multiples Will Optimize Filament Usage!View My Other Work Here! → <a target="_blank" href="https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname" rel="nofollow noopener">https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname</a>

Articulated Cute Fox

just cute

JamesThePrinter

***UPDATE 1/26/24***Added an optional lid&nbsp;This heart-shaped box is built from rope!This is part of my Rope Series. You can view all of my Rope Series models in <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">this collection</a>.&nbsp;Print SettingsNo special settings are required for the heart container, but a fun top layer pattern can add some flair to the base of this model! The optional lid requires support.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Basic Gradient Ocean to Meadow PLA</li></ul>

Rope Heart Container

Valentines/love

Romwba3D

A Cute Rocker Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;I have Just Released a Christmas version of this model also :- <a target="_blank" href="https://makerworld.com/en/models/67297#profileId-71190" rel="nofollow noopener">https://makerworld.com/en/models/67297#profileId-71190</a>&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Rocker Gnome

Gnomes & Shroons

PrintinPlace

Do you like to drink Beer at parties?&nbsp;Well… this is the beer holder for you!&nbsp;All the pieces can be assembled without glue.Maybe some parts needs a little bit of sanding to obtain a perfect fit. The chest and the pants need to be printed with “Fuzzy Skin" activated for perfect interlocking the parts.&nbsp;The Model is designed to fit with 33cl tin can but works also for 50Cl. Obiuvsly it fit for Coke or other tin can.&nbsp;If You like the model please give me a thumbs up!&nbsp;And now is time to print!! But drink responsibly or your butt will grow too big!! ;-)&nbsp;EDIT 19/12/2023 ADDED MERRY BEERMAS WRITING&nbsp;EDIT 20/12/2023 ADDED COCA COLA WRITING AND 2024 GLASSES