dplivingston

dadhacks

This is a different take on the standard purge (poop) chute and bucket. Let your little ghosts slide or drop into the ghost trap, with handle for easy removal and dumping. 2 options available - 1 with the containment unit for those that put their ghost trap behind the printer, and 1 with a slide for those that want their ghost trap on the side.&nbsp;Notes:<ul><li>Ghost trap is meant to be assembled with glue. This was done to keep purge and print time to a minimum. Flat design meant to accommodate tight placement against printer.</li><li>This has been broken out into 5 different build plates to limit each to 4 colors per plate for those with only 1 AMS.</li><li>Smooth PEI recommended for the side panels and doors; just gives a nicer finish.</li><li>Need to use 2 15x3 magnets for the slide.</li><li>Need to use one of the longer M3 course threaded screws (or similar) from the scraper kit that came with the printer to hang the containment unit chute.</li><li>Supports required for containment unit chute and part of the handle.</li><li>Vent holes in side of containment unit chute to keep from impeding any airflow to the vents on back of printer.</li><li>Please note the build plates are preselected. If you want to use a different build plate, please ensure you click the nut icon next to the build plate to change. </li></ul>

Ghost Trap Poop Chute Kit for BambuLab P1 and X1 Series 

Ghostbusters

DonMatis

Customize your Halloween wall clocks! Pick your preferred front and back themes, and decide if you'd like unique minute/hour pointers to create your personalized timepiece.&nbsp;Need an additional clock mechanism, i've used <a target="_blank" href="https://www.amazon.co.uk/dp/B08B8X1FN5?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">this one from Amazon</a>&nbsp;<h3>Print Instructions</h3>For a hassle-free print, use my available profiles. One has the clock's back piece and hour/minute pointers, while the other offers three front hueforge themes. Simply download and select what you'd like to print.<h4>Back Piece</h4>You can choose between two, one with regular numbers and the second with Halloween symbols.Both pieces require, 0.20mm profile with arachne mode for the numbers and optionally ironing on the top surfaces&nbsp;Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Orange </li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #26 (5.20mm) swap to Orange</li></ul><h4>Hour/Minute Pointers</h4>These are designed to work with the specific clock mechanism i used. It might not work for you but it is a quick and easy print to test them out. Just use Classic on the slicer with 0.20mm.&nbsp;<h4>Front Themes (Hueforge)</h4>Here there are 3 different themes that you can choose from. Each one has different layer changes. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Theme 1<figure class="image image_resized image-style-side" style="width:27.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_4ac20afa3d39b.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Blue Gray</li><li>At layer #14 (1.2mm) swap to Orange</li><li>At layer #24 (2mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 2<figure class="image image_resized image-style-side" style="width:26.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_8c77c280b0ff2.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #12 (1.04mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 3<figure class="image image_resized image-style-side" style="width:26.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_ad333fd492355.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #11 (0.96mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on printables.com. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>