Cpt. W7F

Kitten 3D Enthusiastic

an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.

Mikrotik RB5009UG-10 inch or 19inch rackmount kit

Network rack

Source robotics

FOR THE MOST UP-TO-DATE ASSEMBLY MANUAL AND STL FILES GO TO GITHUB: Github: <a target="_blank" href="https://github.com/PCrnjak/PAROL6-Desktop-robot-arm" rel="nofollow noopener">https://github.com/PCrnjak/PAROL6-Desktop-robot-arm</a>PAROL6 is 6 axes desktop robotic arm. It is a robotic arm whose design approach is driven by real needs from a robotic education standpoint, small automation, and scaling from RnD to production. It is the culmination of devolvement and feedback of 2 previous robotic arms I made, both being very successful open-source projects. PAROL6 uses precision planetary gearboxes and belts with careful placement for optimal weight distribution. The design is modular and allows easy addition of closed-loop drivers. From the software side, it uses the custom protocol to allow for industry standard 60-100 Hz loop times. Modern GUI is inspired by industrial and cobot interfaces where all standard ways of control are implemented (resolved rate, cartesian level control, joint level control, motor jog...) It includes a simulator to test your programs without needing a physical robot. PAROL6 is feature-rich with an Isolated I/O, CAN bus, and compliant gripper...All information on how to build and how to use PAROL6 is on GitHub: <a target="_blank" href="https://github.com/PCrnjak/PAROL6-Desktop-robot-arm" rel="nofollow noopener">https://github.com/PCrnjak/PAROL6-Desktop-robot-arm</a>Join discord: <a target="_blank" href="https://discord.gg/prjUvjmGpZ" rel="nofollow noopener">https://discord.gg/prjUvjmGpZ</a> Join forum: <a target="_blank" href="https://discourse.source-robotics.com/" rel="nofollow noopener">https://discourse.source-robotics.com</a>Follow the project on YouTube: <a target="_blank" href="https://www.youtube.com/@source-robotics" rel="nofollow noopener">https://www.youtube.com/@source-robotics</a>Follow the project on Instagram: https://www.instagram.com/source_robotics/If you are interested in buying a kit or assembled robot send us an email on: Info@source-robotics.com

PAROL6 3D printed desktop robotic arm

Big projects

Philipp.

All the Ikea Alex Gridfinity grids I found didn't have an exact fit, so I created my own. All 6 files are needed once for a drawer!

Ikea Alex Wide Gridfinity Grid (Exact Fit)

Gridfinity bases

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>

Wireless Mouse 002

Bambu stuff

DANY112SVK

Printed from PLA on a Bambulab X1C printer. I recommend printing 0.2 layer. All supports. Please contact me or leave a comment if there is a problem.&nbsp;Based on your noticecorrection of the model geometry error at the beginning of the track, which caused the brittleness of the guide track.

Train cross compatible with "LEGO DUPLO"

Toys

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

Functional items

jarvizar

3D miniature of Midtown Manhattan!&nbsp;Model spans from the East River to the Hudson river & 25th St. to 60th St.&nbsp;&nbsp;Check out my collection of other Large miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/468505" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/468505</a>&nbsp;New York City miniatures collection: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/177621" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/177621</a>&nbsp;&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.&nbsp;<h2>Framing Details</h2>&nbsp;This model measures almost exactly 7.5x9.5in (241.32mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap wooden frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B08XVP48KQ" rel="nofollow noopener">https://www.amazon.com/dp/B08XVP48KQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a large printable frame (w/ 1mm water plate) designed to fit my large miniature cities.&nbsp;Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;

New York City Manhattan (Large 8x10)

Decoration / Art

CopyKnight

With the introduction of the Air-Stream-Freezer, our team set itself the task of developing a model for the Bambulab X series. The biggest challenge was to make it LIDAR compatible. Our team rose to this challenge, further developed the Air-Stream-Freezer and quickly designed the Air-Stream-Turbine. Once again, I would like to thank the entire team, who have once again invested every spare minute for months in the development of the project. Once again, it has been designed, designed, changed and tested. A special thank you to Paul, to whom we tirelessly handed over new designs so that he could check compatibility. Once again, it is expressly stated that remixes of this product design are completely prohibited, as once again no phase or rounding off has been added more than necessary. To ensure that there is something for everyone&#39;s taste, this time there are of course two more versions available in addition to the 7 well-known ones: Firstly, the original: 1: Air-Stream-Turbine (it wasn&#39;t called that for no reason) <a target="_blank" href="https://makerworld.com/en/models/429489#profileId-333824" rel="nofollow noopener">https://makerworld.com/en/models/429489#profileId-333824</a> 2: Bambu Lab logo with lettering <a target="_blank" href="https://makerworld.com/en/models/429475#profileId-333807" rel="nofollow noopener">https://makerworld.com/en/models/429475#profileId-333807</a> 3: Bambu Lab lettering single <a target="_blank" href="https://makerworld.com/en/models/429500#profileId-333837" rel="nofollow noopener">https://makerworld.com/en/models/429500#profileId-333837</a> 4: Bambu Lab logo single <a target="_blank" href="https://makerworld.com/en/models/429494#profileId-333828" rel="nofollow noopener">https://makerworld.com/en/models/429494#profileId-333828</a> 5: Bambu Lab P1S version <a target="_blank" href="https://makerworld.com/en/models/429485#profileId-333817" rel="nofollow noopener">https://makerworld.com/en/models/429485#profileId-333817</a> 6: Bambu Lab P1P version <a target="_blank" href="https://makerworld.com/en/models/429480#profileId-333812" rel="nofollow noopener">https://makerworld.com/en/models/429480#profileId-333812</a> 7: completely without bells and whistles, branding or logo <a target="_blank" href="https://makerworld.com/en/models/429474#profileId-333806" rel="nofollow noopener">https://makerworld.com/en/models/429474#profileId-333806</a> Newly added: 8: Bambu Lab X1C version <a target="_blank" href="https://makerworld.com/en/models/429482#profileId-333814" rel="nofollow noopener">https://makerworld.com/en/models/429482#profileId-333814</a> 9: Bambu Lab X1E version <a target="_blank" href="https://makerworld.com/en/models/429486#profileId-333819" rel="nofollow noopener">https://makerworld.com/en/models/429486#profileId-333819</a> What&#39;s new in this version: The Air-Stream turbine can now be printed completely unsupported. There is a split inlet and an asymmetrical outlet for the air supply. Due to the asymmetrical outlet, it is only possible to speak of 360 degrees in relative terms, which is why we have omitted the degree sign in our illustration and replaced it with an asterisk. In case of doubt, this model can be printed with only two walls and completely without infill with a 0.2 layer height. However, we recommend 3 walls with 10% infill and a layer height of 0.1, or 4 walls and 10% infill with a 0.2 nozzle. For all variants, a corresponding number of upper layers should be ensured. This means 5 layers with 0.2 and 10 layers with 0.1 layer height. The magnets that must be used are the same size as those used in the original Bambu Lab component. (4x2 &amp; 2x2) For design reasons it was not possible to use larger magnets. At the point where the smaller magnet has to be placed, care must be taken when slicing that &#34;recognize thin walls&#34; is selected, as the wall thickness at this point is very small. However, this does not matter, the magnet can still be glued in cleanly without any problems and will hold. With a 0.2 Nozzle there is no problem at all, which is why the High Quality and Ultra pressure profile is specially designed for a 0.2 Nozzle. It is generally known that the subject of component cooling is viewed with a great deal of skepticism and suspicion. Many people always want proof. But how and with what could you prove something if the evidence proves nothing, because it cannot prove anything, as it could just as well be manipulated? Then there are always many theoretical things that could possibly prove something, but theory and practice are worlds apart. That&#39;s why we won&#39;t try to convince anyone here. Everyone has to convince themselves. We simply want to invite everyone to do a little mini-experiment that they can understand for themselves. Place a glass filled with water under the original fan and everyone will be able to see the same result with their own eyes. The largest bulge in the water surface will not be in the middle under the nozzle, although this is where it would make the most sense in principle. The bulging of the water surface of the Air-Stream turbine, on the other hand, is much more centrally located under the nozzle. Again, these are facts that anyone can see for themselves if they are willing to carry out this simple test. Because let&#39;s not kid ourselves, pictures of a comparison of two 4-sided overhang tests do not seem to be credible enough, which is why we are sparing ourselves a direct comparison this time. Last but not least, it should be noted that the component should only be printed by someone who can dismantle the original and assemble the reprinted one without help. We will not provide any help in this regard, nor will we encourage anyone to possibly destroy the front housing assembly of the printer. Or to put it another way, you dismantle at your own risk. One last point should be mentioned. This model can also be printed without infill and completely without support. Neither the model nor one of the four printing profiles can be held responsible in the event that it should become detached from the build plate during printing. We decided to add a GIF of a print (High Quality and Ultra print profile) to prove that with a clean build plate and well calibrated ABS filament it is possible to print successfully without support and without brim. For anyone else who may have difficulties, a brim could be added. However, this should not be an argument for rating the model or print profile poorly. What is the difference between the print profiles? Fast Print: Nozzle 0.4 - layer height 0.2 - first layer 0.2 - walls 2 - infill 0 % Medium: Nozzle 0.4 - layer height 0.1 - first layer 0.2 - walls 3 - infill 10 % Gyroid High Quality: Nozzle 0.2 - layer height 0.1 - first layer 0.2 - walls 4 - infill 0 % Ultra: Nozzle 0.2 - layer height 0.1 - first layer 0.2 - walls 4 - infill 10 % Gyroid Thank you and have fun. Mit der Einführung des Air-Stream-Freezer hat sich unser Team es zur Aufgabe gemacht, ein Modell für die Bambulab X-Serie zu entwickeln. Die größte Herausforderung dabei war es, diesen LIDAR kompatibel zu designen. Dieser Herausforderung hat sich unser Team gestellt, den Air-Stream-Freezer weiterentwickelt und kurzer Hand die Air-Stream-Turbine konzipiert. Auch heute möchte ich mich abermals bei dem gesamten Team bedanken, das abermals wieder jede freie Minute seit Monaten in die Entwicklung des Projektes investiert hat. Es wurde wieder erneut entworfen, designed, geändert und getestet. An Paul gibt es ein besonderes Dankeschön, den wir unermüdlich neue Entwürfe übergaben, damit er die Kompatibilität überprüfen konnte. Einmal mehr wird hiermit noch einmal Ausdrücklich erklärt, das Remixe von diesem Produktdesign vollständig untersagt sind, da auch hier wieder keine Phase oder Abrundung mehr als nötig hinein konstruiert wurde. Damit auch diesmal wieder etwas für jedermanns Geschmack dabei ist, stehen diesmal zu den 7 altbekannten natürlich zwei weitere Versionen zu Verfügung: Zum einen das Original: 1: Air-Stream-Turbine (der wurde nicht ohne Grund so genannt) <a target="_blank" href="https://makerworld.com/en/models/429489#profileId-333824" rel="nofollow noopener">https://makerworld.com/en/models/429489#profileId-333824</a>2: Bambu Lab Logo mit Schriftzug <a target="_blank" href="https://makerworld.com/en/models/429475#profileId-333807" rel="nofollow noopener">https://makerworld.com/en/models/429475#profileId-333807</a>3: Bambu Lab Schriftzug einzeln <a target="_blank" href="https://makerworld.com/en/models/429500#profileId-333837" rel="nofollow noopener">https://makerworld.com/en/models/429500#profileId-333837</a>4: Bambu Lab Logo einzeln <a target="_blank" href="https://makerworld.com/en/models/429494#profileId-333828" rel="nofollow noopener">https://makerworld.com/en/models/429494#profileId-333828</a>5: Bambu Lab P1S Version <a target="_blank" href="https://makerworld.com/en/models/429485#profileId-333817" rel="nofollow noopener">https://makerworld.com/en/models/429485#profileId-333817</a>6: Bambu Lab P1P Version <a target="_blank" href="https://makerworld.com/en/models/429480#profileId-333812" rel="nofollow noopener">https://makerworld.com/en/models/429480#profileId-333812</a>7: komplett ohne Schnickschnack, Branding oder Logo <a target="_blank" href="https://makerworld.com/en/models/429474#profileId-333806" rel="nofollow noopener">https://makerworld.com/en/models/429474#profileId-333806</a> Neu dazugekommen ist: 8: Bambu Lab X1C Version <a target="_blank" href="https://makerworld.com/en/models/429482#profileId-333814" rel="nofollow noopener">https://makerworld.com/en/models/429482#profileId-333814</a>9: Bambu Lab X1E Version <a target="_blank" href="https://makerworld.com/en/models/429486#profileId-333819" rel="nofollow noopener">https://makerworld.com/en/models/429486#profileId-333819</a> Was ist neu an dieser Version: Die Air-Stream-Turbine kann nun komplett ohne Unterstützung gedruckt werden. Es gibt einen geteilten Einlass und einen asymmetrischen Auslass für die Luftzufuhr. Durch den asymmetrischen Auslass kann nur relativ von 360 Grad gesprochen werden, weshalb wir anstelle des Grad Zeichens in unserer Abbildung abgesehen und dies mit einem Sternchen ersetzt haben.Dieses Modell kann im Zweifelsfall mit nur zwei Wänden und komplett ohne Füllung mit einer 0.2 Schichthöhe gedruckt werden. Empfohlen wird allerdings 3 Wände mit 10% Füllung und einer Schichthöhe von 0.1, bzw. mit einer 0.2 Düse 4 Wände und 10% Füllung. Bei allen Varianten sollte auf entsprechend viel obere Schichten geachtet werden. Das heißt 5 Schichten bei 0.2 und 10 Schichten bei 0.1 Schichthöhe. Die Magneten die benutzt werden müssen, haben die selbe Größe wie die, die beim Original Bauteil von Bambu Lab verwendet wurden. (4x2 &amp; 2x2) Konstruktionstechnisch war es nicht anderes möglich größere zu verwenden. An der Stelle wo der kleiner Magnet platziert werden muss, muss beim Slicen darauf geachtet werden, dass „dünne Wände erkennen“ ausgewählt wird, da die Wandstärke an dieser Stelle sehr gering ist. Dies macht aber nichts, der Magnet kann trotzdem ohne Probleme sauber darin eingeklebt werden und wird halten. Mit einer 0.2 Nozzle gibt es dahingehend überhaupt keine Problem, weshalb das High Quality und Ultra Druckprofil speziell für eine 0.2 Nozzle ausgelegt ist. Im allgemeinen ist bekannt, dass das Thema Bauteilkühlung mit viel Skepsis und Argwohn beäugt wird. Viele wollen immer Beweise. Aber wie und womit könnte man denn etwas beweisen, wenn die Beweise nichts beweisen, weil sie nichts beweisen können, da sie ebenso gut manipuliert sein können? Dann gibt es immer viele theoretische Dinge die womöglich etwas beweisen können, doch zwischen Theorie und Praxis liegen bekanntlich ja auch Welten. Deswegen werden wir hier auch nicht versuchen irgendjemanden zu überzeugen. Überzeugen muss sich schon jeder selbst. Wir wollen lediglich jeden einladen ein kleines für jeden selbst nachvollziehbares Miniexperiment zu machen. Stellt ein Glas mit Wasser gefüllt unter den Originallüfter und jeder wird dasselbe Ergebnis mit seinen eignen Augen wahrnehmen können. Die größte Ausbeulung der Wasseroberfläche wird nicht mittig unter der Nozzle sein, wo es prinzipiell allerdings am sinnvollsten wäre. Die Ausbeulung der Wasseroberfläche der Air-Stream-Turbine hingegen ist wesentlich mittiger und zentraler unter der Nozzle wiederzufinden. Das sind wiederum Tatsachen von denen sich jeder selbst überzeugen kann, sofern er gewillt ist, diesen einfachen Test zu machen. Denn machen wir uns nichts vor, Bilder von einem Vergleich zweier 4 Seiten-Überhangtests scheinen, so wir wir feststellten, nicht glaubwürdig genug zu sein, weshalb wir uns diesmal einen direkten Vergleich ersparen. Zu guter Letzt sei noch darauf hingewiesen, dass das Bauteil nur jemand drucken sollte, der auch ohne Hilfe, den Originalen demontieren und den neu Gedruckten montieren kann. Es wird von uns dahin gehend keinerlei Hilfe geben, noch werden wir jemanden dazu zu animieren, womöglich die vordere Gehäusebaugruppe des Druckers zu zerstören. Oder nochmal anders ausgedrückt, sie demontieren auf eigene Gefahr. Ein allerletzter Punkt sei noch erwähnt. Dieses Modell kann auch ohne Infill und komplett ohne Unterstützung gedruckt werden. Weder das Modell noch eins der vier Druckprofile kann etwas dafür, für den Fall dass es sich während des Druckes von der Bauplatte womöglich lösen sollte. Wir haben uns entschieden extra eine GIF von einem Druck (High Quality und Ultra Druckprofil) hinzuzufügen, um zu belegen, dass es mit einer sauberen Bauplatte und gut kalibrierten ABS Filament problemlos möglich ist ohne Unterstützung und ohne Brim erfolgreich zu drucken. Für alle anderen, die womöglich Schwierigkeiten bekommen sollten, könnten ein Brim hinzufügen. Allerdings sollte dies keine Argument dafür sein, das Modell oder Druckprofil schlecht zu bewerten. Worin unterscheiden sich die Druckprofile? Fast Print: Düse 0.4 – Schichthöhe 0.2 – erste Schicht 0.2 – Wände 2 – Füllung 0 %Medium: Düse 0.4 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 3 – Füllung 10 % GyroidHigh Quality: Düse 0.2 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 4 – Füllung 0 %Ultra: Düse 0.2 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 4 – Füllung 10 % Gyroid Danke und viel Spaß.

Fan Flow 360 Toroidal Air Duct P1S 风扇 气流 风扇流量 风道

Bambu upgrades

teh_chaosjester

Like me, you probably have ended up with a bunch of M2-M5 screw packs that need a home. Why not give them one?&nbsp;These 2x3 Gridfinity bins are for M2 to M5 screws that usually come in packs with some nuts, and lengths from 6MM to 20MM. &nbsp;The text is cut out and can be printed in multicolour to make them stand out a bit more.

Gridfinity M2, M3, M4 and M5 Screw and Heated Insert Holders

Gridfinity bins

JonathanLevi

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I store batteries elsewhere.Enjoy!⚡tips@lightning.jle.viCategory: Organization&nbsp;This item is featured in the video:<figure class="media"></figure>