domo326

HpInvent

Right now I&#39;m a little into modern plant pots for all my plants at home. So I designed some new ones. → The new soft Fabric Pot Collection Hope you like the design ! There are differtent versions availible in the print profiles Just choose the print profile you like best. The Pots can simply be scaled to you demands&nbsp;On my photos is the 60mm Version. Its the most tricky to print. For the bigger versions you get much more details and smoother overall look. I normaly tend to show the worst prints I made so you can see what the minimum result is.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-06-14_835436fae26ee.png"></a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Inflated soft Cloth Planter Plant Pot Vase Series6

plants

HellDivers

Maty505

articulated dragon model. resize for your needs.

Articulated Crystal Dragon

Articulating

ZR_CrackiiN

as this is NOT behind a paywall, your support would be appreciated!<a target="_blank" href="https://www.paypal.com/paypalme/zrcrackiin" rel="nofollow noopener">https://www.paypal.com/paypalme/zrcrackiin</a>*********************************************************MASSIVE SHOUTOUT TO TALKING SASQUACH FOR THE REVIEW/ HOW TO GUIDE!<figure class="media"><oembed url="https://www.youtube.com/watch?v=pLYcAfp5PMc"></oembed></figure><a target="_blank" href="https://www.youtube.com/watch?v=pLYcAfp5PMc" rel="nofollow noopener">https://www.youtube.com/watch?v=pLYcAfp5PMc</a>&nbsp;************************************************************UPDATED 18/09/2023***<ol><li>Pcbway Case Set</li></ol><ul><li>Optimised case set for PCBWAY this is front v3 and rear v1 in one file ready to be uploaded and ordered, scailing pre done so you don&#39;t need to.</li></ul>************************************************************UPDATED 13/09/2023***<ol><li>Front Case v3</li></ol><ul><li>Opened up GPIO holes to 1.4x1.4mm as a revision to allow for resin prints with clear coat applied on top</li></ul>************************************************************UPDATED 27/08/2023***<ol><li>Front Case v2</li></ol><ul><li>Opened up GPIO holes to 1.0x1.0mm to allow easier board insertion.</li></ul>*********************************************************&nbsp;Replacement case for flipper zero.Confirmed good fitment on my own personal flipper, and various others in the community.&nbsp;To allow for manufacturing tolerances of the flipper, bump the scale to 100.29% respectivelybeware of your iButton pins, i take no responsibility for you breaking them, it fits mine so it SHOULD fit yours.seams are a little tight but it fits well.Screen window sits in place (you can glue if you want)IR Filter will fit in place also.i spent a long long time making this happen, and i didn&#39;t want to butcher things like everyone else who “made one”your window and IR filter will fit, without cutting them or shaving them down.printed on a X1C @ 0.08 layer height&nbsp;&nbsp;&nbsp;as this is NOT behind a paywall, your support would be appreciated!<a target="_blank" href="https://www.paypal.com/paypalme/zrcrackiin" rel="nofollow noopener">https://www.paypal.com/paypalme/zrcrackiin</a>

Flipper zero case

flipper zero stuff

2d art

amos

Yes, it’s me again. After drawing the lightsaber file last time, this time I drew a samurai sword. It can also be used with the A1 MINI. Just make sure that the retraction positions are not on the same side. If you have any questions, you can ask me. I will try to help you solve it.-----------------------------------&nbsp;"I have received your questions. I am currently making changes to the parameters and conducting print tests. I hope that after the printing is completed, I can provide you with a smoother katana."&nbsp;-----------------------------------"I adjusted the angle at which the samurai sword extends, so it definitely won't turn into a flying knife. However, I still need everyone to be aware of this aspect when slicing. The areas marked with white dots must absolutely not overlap."&nbsp;&nbsp;like this is ok<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_43c1c301da83b.jpg">&nbsp;&nbsp;this one maybe your knife won't slip<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_ab68cdbaa21c9.jpg">&nbsp;&nbsp;

Samurai sword 

swords 

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

Bambu Printer accessories

Good Day Designs

Hey everyone!I just started getting into electronics and design after a bit of 3D printing. This is my first official project with proper documentation, measurements, and testing around a Raspberry Pi. The design is purposeful where the SSDs stick out and with cables going around, wrapped in a cable sleeve for an interesting look. The OLED helps to monitor the device and to check ip.Updates:<ul><li>9/22/2023: Initial release</li></ul>Parts used:<ul><li>1x Raspberry Pi 4B 2gb</li><li>1x OLED 0.96 i2c display module</li><li>Required cables (ethernet, power cable, etc.)</li><li>1x 60mm 5v USB fan</li><li>2x USB to SATA cable</li><li>2x SSD 2.5"</li><li>2x M3 14mm-16mm screw</li><li>23x M3 6mm screw</li><li>25x M3 4mm screw</li><li>2x M3 nut</li></ul><a target="_blank" href="https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1" rel="nofollow noopener">https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1</a>All up to you but this is how I printed mine:<ul><li>Printer: Bambu Lab P1P & Elegoo Neptune 3 Plus - for the inner panels</li><li>Some adjustments have to be made in terms of the base</li><li>Walls: 4</li><li>Top/bottom: 4</li><li>Nozzle: 4mm</li><li>Layer height: 0.16mm</li><li>Infill: 15-20% - any pattern</li><li>Supports: ON for outer panels - tree</li><li>Brim: ON for outer panels</li></ul>Here are some assemblies to help install and notes:<ul><li>SSD side bracket is to be mounted inside, keeping the 2 SSDs in place</li><li>60mm USB fan apparently can't be controlled so I'd recommend an adapter with a physical knob attached</li><li>There are 3 versions of Front Panel Outer for OLED, no OLED, and additional airflow.</li><li>SSD top panel bracket only needs 2 screws for SSD on the top as it's stable enough</li></ul><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_f2d7f21300bcb.png"></figure><figure class="image image_resized" style="width:52.41%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_d87cad8bcc57c.png"></figure><figure class="image image_resized" style="width:52.2%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_3c89542c443da.png"></figure>Please leave any comments/feedback as they would be greatly appreciated!

Raspberry Pi NAS Enclosure - Dual SSD 2.5"

projects worth trying

3D Prints This Week

***UPDATE***IF YOU LIKE THIS I JUST ADDED A KEYCHAIN VERSION IN THE LINK BELOW. THE KEYCHAIN IS THICKER PER REQUEST.&nbsp;https://makerworld.com/en/models/161149#profileId-176849******************************************************************Load Black, Red, Gray, and white into AMS.&nbsp;If no AMSSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Lava RedAt layer #9 (0.8mm) swap to GrayAt layer #17 (1.44mm) swap to White for the rest.&nbsp;If you like how it came out, feel free to buy us a cup of coffee in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Pokemon / Wall Art  / Ash / Charizard / Pikachu

wallart

remi.rafael

<div><h1>Summary</h1><div>This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types.Edit: Bigger sizes are now available here: <a href="https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws" rel="nofollow">https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws</a> or here: <a href="/thing:5975322" rel="nofollow">https://www.thingiverse.com/thing:5975322</a></div></div>

Handles for M3 to M6 bolts and screws

Functional

lindnjoe

Snowman Door Corner to sit on the corner of the trim around the door.

Snowman Door Corner

Door Corners

braga3dprint

The 3D model of a lightbox featuring the YouTube logo is a stylish and contemporary design. This sleek and minimalist lightbox displays the iconic YouTube play button, instantly recognizable to anyone familiar with the world's largest video-sharing platform. When illuminated, it emits a modern and captivating glow, making it a fantastic addition to the workspace of content creators, videographers, or YouTube enthusiasts. Bring a touch of the digital age to your space with this YouTube-inspired lightbox, creating a vibrant and engaging atmosphere for your creative endeavors. 🎥✨ If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

YouTube Lightbox LED Lamp

LightBox

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

Lights

DonMatis

I am a big fan of Joker and his smile, so here is a filament painting of him :) This model is 6mm in depth, so it will take quite some time to print, please use a tight brim to keep it on the printer bed and avoid wrapping.I am using bone white to add one more layer of shadow, feel free to skip this if you don't like the yellowish tint.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA+ Sunlu White</li></ul>Swap Instructions:Start with Black<ul><li>At layer #16 (1.36mm) swap to Charcoal Black</li><li>At layer #20 (1.68mm) swap to Cement Gray</li><li>At layer #24 (2mm) swap to Gray</li><li>At layer #28 (2.32mm) swap to Light Gray</li><li>At layer #34 (2.8mm) swap to Bone White</li><li>At layer #44 (3.6mm) swap to White for the rest.</li></ul>

The Joker

HueForge 

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!