dnagaming.info

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

stuff

Alexis_

<h3>Swatch A1 mini Display Board</h3><ol><li>AddNorth</li><li>Amazon</li><li>Amolen</li><li>Anycubic</li><li>ArianePlast</li><li>BambuLab</li><li>Cookiecad</li><li>Creality</li><li>Elegoo</li><li>Eryone</li><li>Esun</li><li>Fillamentum</li><li>Formfutura</li><li>Giantarm</li><li>GST3D</li><li>Hatchbox</li><li>Inland</li><li>kexcelled</li><li>MatterHackers</li><li>Overture</li><li>Polymaker</li><li>Protopasta</li><li>Prusament</li><li>Rosa</li><li>Sunlu</li><li>Voxelab</li><li>Wanhao</li><li>…</li></ol>&nbsp;How to download the files:<figure class="image image_resized" style="width:78.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/612028/2024-03-01_a83705f8f9708.jpg"></figure>___________________________________________________________________________________________________&nbsp;

Filament Swatches Board

SWATCH

Booyashaka

Modular Stackable Shelving System------------------------------------------------------------------------------Fully customizable shelving. Snug fit design.-----------------------2 style of posts at 25mm height increment from 50 to 200 (clearance)‘relatively stronk’ - the dumbbell pictured is 10lbs (tested with bambu pla basic), you can also add mid span posts for extra strength-----------------------Cap for top posts. Also included posts with reduced peg height for a flush top-----------------------Feet - 10 &amp; 20mm height. And a 5mm to use as a floating mid span post anchor-----------------------2 style of base (rib &amp; no rib) - Width at 60 increment from 60 to 240 - Length @ 120 &amp; 240The rib style base reduce height clearance by 5mmFit bambu filament spool cardboard box&nbsp;(You need to do some mod to print the full size 240x240 base due to the interference with the front left purge area, bambu guide <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">here</a>)(2 smaller bases in the picture are older versions)&nbsp;Bambu wouldn&#39;t accept the large 240x240 base in the 3mf, so I have uploaded the model.&nbsp;************************************************&nbsp;TOLERANCES are 0.22mm &amp; 0.15mm for the pegs (reg &amp; top)Works fine with 0.4mm nozzle, bambu pla basic &amp; default line width for me.&nbsp;************************************************&nbsp;2024-01-13 REVISION 2 - plate 11 to 13-----------------------added 3 pegs posts (reg &amp; slim) - all heightadded 4 pegs posts (slim) - all height&nbsp;************************************************&nbsp;2024-01-20 REVISION 3 - plate 14 &amp; 15-----------------------Added 5 vertical brace for when you need max sway protection - for height 100 to 200.Stackable and as always - no support needed - pegs should slide right in just the way she likes it.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-20_67390e96d50e1.jpg">&nbsp;************************************************&nbsp;2024-01-28 REVISION 4 - plate 16-----------------------Added offset posts - you can use the entire base plates surface with these.Slim and regular - all heights.&nbsp;01-28 pm - Forgot 2 add top holder/cap - plate 9&nbsp;2024-01-30 - there was a slight error on the top holder/cap - fixed&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-28_61f49fa041319.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-28_1c5a707feadd.jpg">&nbsp;************************************************&nbsp;2024-05-03 REVISION 5 - plate 17 &amp; 18-----------------------As requested by some users:Added slim base 240x180 ribbed - save ~45% in filament - suitable for boxes or large itemAdded vertical brace height 75 &amp; 50 &nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-05-03_d8c5cc5b08761.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-05-03_3189fcec4eeb.jpg">************************************************&nbsp;

Modular Stackable Open Shelving System

shelf

JohnPepsi

Not happy with the camera on your A1 or A1 Mini? Got a spare Wyze Cam V3 laying around? Give this print a try! This is very simple design that uses very little filament and can be printed in very little time, this adds an actual live video feed to to your A1/A1 Mini as well as the bonus of night vision. This design uses no hardware and simply presses into place still allowing the factory camera and light to function.&nbsp;Camera can be easily removed for access to the optional micro SD card (needed for recording and time-lapse)&nbsp;Print with whatever setting you prefer just make sure to turn on supports! (very little needed)&nbsp;Update: Added an STL for the A1 Mini, please let me know if there are any issues&nbsp;Wyze Cam V1 and V2 owners, please use the following link <a target="_blank" href="https://makerworld.com/en/models/101607#profileId-108400" rel="nofollow noopener">https://makerworld.com/en/models/101607#profileId-108400</a>

Bambu A1 Wyze Cam V3 Mount (No hardware)

A1 stuff

DesignCraft

This adapter system wraps the edges of an ERYONE 1kg 196x62mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>ERYONE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the ERYONE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

stuff

SWATCH

shelf

A1 stuff

ams