djhesepe

3D Endeavors

Swap Instructions: Start with Charcoal Black At layer #8 (0.52mm) swap to Orange At layer #19 (0.96mm) swap to Yellow At layer #32 (1.48mm) swap to White for the rest

Hueforge Pikachu

hueforge

YelTrik Designs - Click FOLLOW

ARC DESIGN! This arc design is a simple model and simple install and is a very effective in helping to reduce the likihood filament feed and pullback errors. This is not an overly complicated solution for the AMS internal hub! It doesn't require screwing something into place that could potentially damage your very expensive AMS! No screws required! It's critical the AMS internal PTFE hub function as designed without interference. This solution attaches only to the PTFE tubes improving and maintaining proper alignment of the PTFE tubes, at a consistent and specific distance from the hub, for smooth filament feeding and pull back! Simple design, print, and results.&nbsp;Check Out User Reivews and Feedback&nbsp;Simple To Print And Install:Simple to print and install. Don't be fearful of the install if you haven't yet dissembled your AMS. BL has an excellent and simple Wiki on this process. See Installation Procedure below.&nbsp;&nbsp;SEE INSTALLATION PROCEDURE BELOW <a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener">CLICK HERE TO CHECK OUT THESE OTHER PTFE ACCESSORIES</a>&nbsp;INSTALLATION PROCEDURE <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub" rel="nofollow noopener">https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub</a> NOTE: You do not have to remove the AMS Internal Hub. You only need to separate the AMS enclosure from the Spool Roller Assembly.&nbsp;Once you have the AMS disassembled it will look like this: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_16513408f15088.jpg"></figure>&nbsp;&nbsp;The next step is to remove the PTFE tubes from the AMS Internal Hub:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_a3bae2917401e8.jpg"></figure>Once the PTFE tubes have been removed from the Hub, install the AMS Filament Pull Back Guide on each tube. Move it up higher than needed initially<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_01acb3f912e128.jpg"></figure>&nbsp;After all the PTFE tubes have been installed in the AMS Filament Pull Back Guide, reinstall the PTFE tubes into the Hub and move the AMS Filament Pull Back Fix as seen in this photo:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_3901d04a158868.jpg"></figure>&nbsp;Assemble the AMS in the reverse order you followed to disassemble it. NOTE: Remember to plug in the electrical connectors or you'll have to repeat the disassembly and reassembly procedure, which could be frustrating. Don't ask me how I know. ;-) That's It!

AMS Filament Feed & Pull Back Errors

Fixes

boxiyt

I love Mechengg's idea and have optimized this one for every A1 Mini owner.

Gift Box w/ 120 Screws (optimized for A1 Mini)

Geschenkboxen

braga3dprint

The 3D model of a lightbox featuring the iconic Red Bull logo is a dynamic representation of energy and vitality. The Red Bull emblem, synonymous with endurance and exhilaration, takes center stage, vividly capturing the brand's spirit. This intricately designed rendition showcases the bull leaping in a powerful and dynamic pose, embodying strength and momentum. When illuminated, the lightbox comes to life, radiating the essence of Red Bull's vigor and vitality. Let this lightbox invigorate your space, infusing it with the high-octane spirit that Red Bull is renowned for. 🚀🔴&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with the soldering iron or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl+P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning treshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

hueforge

Fixes

Geschenkboxen

LED Lamp