djeclipse25

accessories to build stuff

Kit Crafters

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_c8748237aa818.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_9ee42934cb225.webp"></figure><h3>Marble Rollercoaster with Filament Rails</h3>Hey all! When I was a teenager, I was gifted a kit called SpaceRail where you assembled a rollercoaster for marbles. It consisted of metal rods and a roll of plastic wire that formed rails. I recently, remebered this and thought it might be interesting to 3D print it and use filament as the rails, so that the whole kit (minus the marbles) can be made at home!&nbsp;The FilaCoaster consists of several block types, connectors, and a board to assemble everything on. Everything is put together with 3D printed screws and threads; a screwdriver model is included in the set to help with assembly. The marble sizes supported are 14-17 mm marbles (the Bambu Lab Marble Run Kit comes with 14 mm marbles).<h3>Parts:</h3><ul><li>Blocks:<ul><li>Riser - PLA - These blocks screw together to create supports to hold the rails up</li><li>Rail Holder - PLA - These blocks go on top of a stack of Risers and hold the Angled Rail Connector</li><li>End - PLA - This block goes at the end to catch the marble</li></ul></li><li>Connectors:<ul><li>Angled Rail Connector - PETG - This attaches to the Rail Holder with a pressure fit and can be attached at an angle</li><li>Floating Rail Connector - PETG - These are attached intermittently between Angle Rail Connectors to keep the rail a consistent width</li></ul></li><li>Board Pieces:<ul><li>Board - PLA - This prints upside-down; use the Board Screws to attach Risers</li><li>Board Screws - PLA - These connect Risers to the Board</li><li>Screwdriver - PETG - This assists in screwing in the Board Screws</li><li>Rails - PETG Filament - Raw PETG filament is used for the Rails</li></ul></li></ul>Here's the parts labelled in the slicer:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_77df06a680ca9.png"></figure>&nbsp;The parts connecting to the filament rails should be printed in PETG. PLA worked okay in my prototyping, however they broke very often when snapping in the filament while PETG allows for very easy assembly. If you must use PLA, I recommend a PLA+ or PLA Meta filament that is more flexible and stronger. The filament rail can also be raw PLA filament, but be warned it's harder to shape for the rollercoaster than PETG, and again, PLA+ or PLA Meta will be more workable than PLA.<h2>Build Instructions</h2>After printing all the parts, here's how you can assemble your custom FilaCoaster.<h3>Step 1:</h3><figure class="image image_resized" style="width:66.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_5e41e4602006d.jpg"></figure>Put a screw in the desired hole of the board, from underneath.<h3>Step 2:</h3><figure class="image image_resized" style="width:66.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_bba4c5adee18a.jpg"></figure>Hand screw or use the printed screwdriver to screw a Riser Block onto the Board.<h3>Step 3:</h3><figure class="image image_resized" style="width:65.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_ccdbe3018e07e.jpg"></figure>Attach more Risers to increase the height of the coaster support tower.Step 4:<figure class="image image_resized" style="width:65.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_f360750c77e57.jpg"></figure>When you're done stacking Risers, screw on a Rail Holder to the top of the tower. The whole support tower can be rotated to angle the Rail Holder however you'd like.Step 5:<figure class="image image_resized" style="width:65.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_67253de2deae6.jpg"></figure>To finish the support tower, press fit an Angled Rail Connector onto the Rail Holder. The Angled Rail Connector can be angled side to side to better fit your custom coaster path.&nbsp;Repeat these steps with shorter towers each time along your custom path. When the support towers are done, you can begin snapping in the filament onto the Angled Rail Connectors to create the rails. The filament rails can be snapped in by hand, but using simple pliers can make it much easier. Use the model image as a guide on how often to put Floating Rail Connectors along your track. Finally, screw in an End Block to the board at the end of your track and your FilaCoaster will be complete!&nbsp;For those with the Bambu Lab Marble Run Kit, I've also created a Spiral Lift machine that turns your rollercoaster into an endless ride!&nbsp;<h3><a target="_blank" href="https://makerworld.com/en/models/171965#profileId-188789" rel="nofollow noopener">Check it out here: Spiral Lift</a></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_7a739a097eac8.webp"></figure>&nbsp;

FilaCoaster - Filament Marble Rollercoaster

For Fun

FilliFuu

Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs&nbsp;Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed ‘flexi-fit’ chain. The flexi-fit design is an evolving experiment seen in previous models I have released and now been improved upon. It allows a standard articulated design to snap together to remain rigid for posing and support or simply for your own amusement.Improvements include -&nbsp;-Better and easier bridging.-Changed location of socket to allow greater pivoting-Slightly increased join size, tighter fit (can be eased with multiple uses)-Larger and extra walls for strength&nbsp;Still in early development, with your feedback I hope to improve even further for an awesome articulated design that is commonly enjoyed.&nbsp;Note *My First time printing with Bambulab exclusive filamentPrinted with the beautiful PLA Arctic Whisper, PLA Onyx Black Sparkle & PLA Basic Yellow & Red Thank you so much Bambulab for creating this fantastic and beautifully optimized filament.&nbsp;Model contents&nbsp;-Painted and unpainted variations/ miniature scale for A1 mini-Cloud Jumper base model and basic mini wings (for those who wish to use without large wings but choose to fill the wing sockets)-Solid wings, folded and spread, the cover photograph contains one of each, but your free to choose 4 folded or 4 spread if that's what you wish-Flexi wings, purely for fun based upon the ‘NASA fabric’ designs you may have seen by multiple other designers-All STL files associated&nbsp;-Additional profile for the solid wings, to anyone who may encounter issues printing the larger wing. I included this file which lays the wings as flat as possible to the bed, the rear of the wings quality will be likely be impacted and require cleaning, but have zero danger of the print collapsing, print only if you have issues with your tool-head knocking your prints.&nbsp;How to & Assembly&nbsp;Simply print the base model and your choice of wings, selecting whichever printer you are using.&nbsp;Once printed simply insert the wings into the correct sockets being careful not to damage your model, you may wish to lightly trim or sand the ball socket on the wing if required (see pictures & troubleshoot section below) and your done.&nbsp;To use the flexi-fit joins, pull the ball into the clip on each link, can be stiff at first but loosens up each time you use this function.&nbsp;Print is calibrated towards PLA basic. Tested successfully in silk at 120% (CC3C Silk no issues), I am unsure how strong the link will be when printed with silk but its generally not recommended for articulating models.&nbsp;Print Settings&nbsp;Printed multiple times in different sizes & filamentsFor those not using the 3.mf files here is what is recommended…Standard 0.42 wall/ 0.3 used on the outer wall for the main body to increase detail.No brim or support needed on the main file & flexi wings.brim and supports used on the spread wing, the folded wing recommended brim for better corner adhesion4 wall for strength25% gyroid infillz hop 0.4 on the solid wingsWall slowed to 120 however this is entirely up to you depending on what your comfortable printing&nbsp;Troubleshooting&nbsp;-Common problems I often hear can often be easily solved but simply cleaning your 3D print bed so if you have adhesion issues make sure to scrub your plate thoroughly using warm water and soap, rinse with hot water and air dry vertically. IPA is often recommended by most but I personally find standard dishwasher soap to be fine.&nbsp;-Other adhesion issues can be fixed using a brim, but is not recommended unless urgently required or specified in the print settings above.&nbsp;-Tool-head knocks print, I have added an easier print profile with is to be avoided unless required, this profile is labelled 'SAFE' use only if other methods fail. Other reasons for the tool-head knocking the print can be, z-hop required in your slicer settings (turned on by default in my uploaded profiles) Your printer belts may require tightening, carbon rods require cleaning and bearings require lubrication. Calibrate your filament and increases fan speed on your tool-head. If these all fail please use the profile listed earlier.&nbsp;-Ball sockets are too tight to insert, common but the sockets require a tight fit to remain rigid once inserted - its completely fine to lightly sand or even use clippers to slightly trip the ball to allow you to easily insert the socket while remain stable. This may be required depending on which filament you choose to print with.&nbsp;Any other issues please ask and I will help as best as I can, thank you.&nbsp;FIN&nbsp;

Flexi-Fit Cloud Jumper Dragon

figures

Marc Elbichon

☕Checkout my other Nespresso designs : <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/90969" rel="nofollow noopener">https://makerworld.com/en/u/3864875302/collections/90969</a>&nbsp;Fast and economic Nespresso Vertuo capsules tower (vase mode) :<ul><li>5 differents versions (3, 4, 5, 6 or 8 sides)</li><li>Variable height, choose the height you want (just scale the body on Z axis, see below suggested heights)</li><li>3 bases : without labels, with a single label (name or roasting) or 3 labels (name, cup size and roasting)</li></ul>A cutting jig is provided to help you to cut the nespresso boxes, to create the fancy labels. Use a sharp pencil or a lead holder pencil, and a ruler/knife to get a clean cut.&nbsp;It seems different cup size boxes have some minor differences, I made templates for 40,80, 150, 230 and 355ml boxes. I had a 535ml capsules box but there is no roasting indicator.&nbsp;However, you can use any template on any box, just manually center the template around the label you need to cut, it's just a little bit easier and quicker with the exact template.&nbsp;The body towers are made to be printed in vase mode so it doesn't require lot of filament. Scale on Z axis the height you want, I suggested you those heights depending the number of capsules you want to stack :<ul><li>1 capsule : 60 mm</li><li>2 capsules : 112 mm</li><li>3 capsules : 166 mm (max for A1 mini)</li><li>4 capsules : 220 mm (max for X1, P1, A1)</li><li>5 capsules : 274 mm</li><li>6 capsules : 328 mm</li><li>…</li></ul>If you want to stack multiples towers, specially if you have a small build volume, use this <a target="_blank" href="https://makerworld.com/en/models/123987#profileId-133579" rel="nofollow noopener">coupler</a> so you can build the tower's height you want!&nbsp;The print profile for the base include a color change, if you want one color only remove the color change trigger in the preview windows, or simply select the same ams slot for both colors in print dialog&nbsp;The print profile for the towers is optimized for the model, you just need to set the Z height if you want (220mm by default, for 4 capsules)&nbsp;Note: This tower doesn't have a rotating feature, I used a turntable to show it at 360°, look at the <a target="_blank" href="https://makerworld.com/en/models/91244#profileId-97576" rel="nofollow noopener">carousel version</a>.&nbsp;Update 2024-01-03: Added a 40ml capsule cutting jig and rename 230ml jig to 230-355ml because it is the same jig for both sizes&nbsp;

Ultimate Nespresso Vertuo Capsules Tower

household 

maegu_

Wall Art - Hummingbird with Flowers and Bee's

Wall Art - Hummingbird and Flower

decor

Office.3D

CHRISTMAS GNOME TREE LIGHTBOX

Christmas

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Bambu Labs

DonMatis

I plan to create some models with the same “living-in-the-frame” concept and style.This is the first one and i hope you like it.&nbsp;Update 25/8/2023: Added 6mm depth version, the original version is 2mm depth. The “deep” new model will take significantly more time to print and more filament.<blockquote>Both models might show an error for "non-manifold edges”, i did a repair using orca slicer and although it tool some time, it fixed the errors. If you see empty spaces inside the frame, the model will not print correctly. You can also use the print profiles which include the corrected model versions</blockquote>For Model with 2mm depthPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA+ Sunlu White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #5 (0.48mm) swap to Cement Gray</li><li>At layer #8 (0.72mm) swap to Grey</li><li>At layer #12 (1.04mm) swap to Light Gray</li><li>At layer #16 (1.36mm) swap to Bone White</li><li>At layer #18 (1.52mm) swap to White for the rest.</li></ul>---------------------------------------------------------------------------------------For Model with 6mm depthFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #12 (1.04mm) swap to Charcoal Black</li><li>At layer #16 (1.36mm) swap to Cement Gray</li><li>At layer #20 (1.68mm) swap to Gray</li><li>At layer #24 (2mm) swap to Light Gray</li><li>At layer #38 (3.12mm) swap to Bone White</li><li>At layer #42 (3.44mm) swap to White for the rest.</li></ul>

Rooted in the frame

HueForge

The Crafty Maker

Joining the Star Wars Original Trilogy planet shadow boxes is this awesome Endor shadow box. Depicting the 2nd Death Star being built high in the sky.I've used the following colors:<ul><li>Plate 1: Geeetech PLA Black</li><li>Plate 2: PolyMaker PolyTerra PLA Army Dark Green</li><li>Plate 3: Prusament PLA Galaxy Green</li><li>Plate 4: Geeetech PLA Black</li><li>Plate 5: FormFutura EasyFill ePLA Turquoise Blue</li><li>Plate 6: 3DJake ecoPLA Pastel Green</li><li>Logo: Geeetech PLA Black + Geeetech PLA White (multicolor)</li></ul>The colors are just guidelines, you can get creative with the color scheme for a personal touch.&nbsp;It consists of 6 numbered plates.&nbsp;I've also added an updated Star Wars logo that you can attach to the shadow box. This version has a sturdier hook to attach to the box.&nbsp;You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)&nbsp;Print settings &nbsp;Plates<ul><li>No supports</li><li>100% infill</li><li>Arachne wall generator recommended </li><li>For smooth top finish you could use ironing or print, on smooth buildplate, face down.</li></ul>Logo<ul><li>Basic supports with top Z distance of 0.24 100% infill</li><li>Arachne wall generator recommended</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Star Wars Endor Shadow Box (A)

shadow box

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>