diversegraphx

Extrutim

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm cube which contains several functions.&nbsp;The print takes a bit less than 1.5h.&nbsp;Below are pictures from which you can take some measurements to check your cubes for dimensional accuracy.&nbsp;You can check the following properties on this cube: - stringing - bridging (are the bridges over the letter clean, including the large area inside?) - ghosting / ringing - overhangs - dimensional accuracy in all axes - first layer height (is the logo clearly visible on the underside, are there holes in the narrow areas?) - Was the helix printed neatly with a single wall line? - Are there problems with the Z-seam due to the many retraction? - Was the Z printed neatly on the top?You can also try breaking out the Y, if that is too easy you may have to reduce the cooling or increase the printing temperature.&nbsp;Note: Since some people with a nozzle larger than 0.4mm had the problem that the slicer did not slice the Helix (minimum wall thickness for slicing) I added versions for 0.6mm and 0.8mm nozzles.&nbsp;If you like this project, check out <a target="_blank" href="https://www.printables.com/social/38556-extrutim/models?o=download_count" rel="nofollow noopener">my other designs</a> too!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_9d5e5e2ac30f6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_d142138e43665.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_8afa3122c8a95.png"></figure>

Helix Test Cube / Filament Sample / XYZ Calibration

CALIBRATION PRINTS

coppertop_01

1:24 scale model car display lift with concrete floors that connect (glue will be required, didn't make them as locking together).&nbsp;I didn't make it hyper realistic for diorama use, wanted something easy to print, interlocking design for model car display.

4 Post Car Lift 1/24 Scale for Model Cars

bullshit

timbo85

Bambu Lab P1S Poop Bucket&nbsp;Nice residual waste bucket for the Bambu Lab P1S printer. The container can be secured by pressing two magnets of 12mm in diameter and 3mm thick into the holder. The poop bucket snaps, with the two flaps, into place behind the printer.&nbsp;I have used magnets like: https://www.amazon.nl/-/en/Neodymium-Magnets-Magnetic-Bulletin-Storage/dp/B088FNGGNQ/

Bambu Lab P1S Poop Bucket Magnetic

waste buckets

duck.knapp

My version of the disc holder is very light and stackable.&nbsp;&nbsp;As shown in the picture, the font can simply be adjusted in the slicer

5" Sanding Disc Storage / Holder / Rack

Power tool and accessories

3D servis

This is a combination tool to help disconnect the PTFE tube and the AMS cable.

AMS Disconnect Tool

3D printer tools

Jorge Rui

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;<h3>Introduction</h3>In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it, and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is dangerous, but the truth is that it worked, and put it back on the AMS.The silica bags remained on the AMS, giving a horrible look to a piece designed with so much care in mind...You can see my first solution <a target="_blank" href="https://www.reddit.com/r/BambuLab/comments/153qohm/my_dream_team_the_x1c_combo_is_the_new_upgrade/?utm_source=share&amp;utm_medium=ios_app&amp;utm_name=ioscss&amp;utm_content=1&amp;utm_term=1" rel="nofollow noopener">here</a>, not good at all. Checked where I could &#34;hide&#34; the silica, but none of the ideas satisfied me....Eventually, the extra desiccant will no longer be needed. But in the meantime, the best place will be inside the spools. In this case it can accompany the spool when I put it in outside the AMS, when no longer need it.This design was good and elegant: <a target="_blank" href="https://www.printables.com/model/65922-silica-gel-spool-container," rel="nofollow noopener">https://www.printables.com/model/65922-silica-gel-spool-container,</a>I analyzed it and, re-created it from the ground-up to meet my construction and tolerance requirements. I share my work with this great community.&nbsp;This is an excelente complement for the <a target="_blank" href="https://amzn.to/3UZiEJO" rel="nofollow noopener">Sunlu S4 filament dryer </a><img class="image_resized" style="width: 27.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2024-05-26_1ebe389b9fef5.png"><h3>Note</h3>After some requests I&#39;ve made one with the mini thermometer/digital hygrometer embedded in the lid. For now is only available for members of my club in <a target="_blank" href="https://www.printables.com/model/598697-desiccant-container-for-spool-with-thermometer-hyg" rel="nofollow noopener">printables.com</a>.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_508077f273c79.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_a3ec384a6589b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_f2377218e8c38.jpg"></figure></td></tr></tbody></table></figure><h3>Change log:</h3><ul><li>(20-07-2023) - Added an updated version, that I think it will be easy to print, removed the fillet on the Cap, and added a conic fillet on the bottom on the container (last image).</li><li>(09-09-2023) - Complete reconstruction of the model. The openings are now narrower for better bridging. the logo is embedded on the lid. File pre-configured for bambu studio</li><li>(29-09-2023) - Added step files.</li></ul>

Desiccant container for Spool

Desiccant containers

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

Questions

MadMax3D

Fun Christmas clocks. Faces are 195 mm diameter and printed face down for smooth or textured finish. There are 3 profiles included. One for the clock case, one for the Grinch face, and one for the wreath face. Wall hang or use the optional display stand for mantles or shelves. All printed with .4mm nozzle at .2mm layer height. Some minor support is required for the clock case and is easily removable with needle nose pliers. Use 3x8mm hex screws for the face and display stand. If you prefer to glue the face into the case, the face profiles have an option to print it with just the center hole for the clock hands.&nbsp;I used <a target="_blank" href="https://www.amazon.com/dp/B0B5T6QM3F?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">these</a> clock movements.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2612385699/collections/98648" rel="nofollow noopener">MORE CLOCKS</a>&nbsp;Printing Instructions&nbsp;I used PLA at 5% infill with a brim to minimize the potential for lifting from the plate. To assign your own colors, simply select your AMS filaments in the proper slicer slot.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217220/2023-11-23_b4f9a33f5d1528.png"><figcaption>Select filaments from your AMS in slots 1 and 2</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217220/2023-11-23_062766efbc0118.png"></figure>&nbsp;&nbsp;

Christmas Clocks

Grinch clock

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

PRINTER UPGRADE

4D Maker Lab

Ensure that the arrow at the bottom of each piece points northward to ensure the magnets have the same polarity for them to adhere to each other.&nbsp;You'll need magnets measuring 3mm by 6mm each.&nbsp;<a target="_blank" href="https://amzn.to/3GfpbsN" rel="nofollow noopener">6x3 Magnets</a> on amazon.comYour support is greatly appreciated as it enables me to offer models for free. If you choose to make a purchase through any of the provided links, I may earn a commission. Thank you for being a vital part of this endeavor.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/1XSSLzSVfu8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1XSSLzSVfu8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1XSSLzSVfu8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Simplify your workspace organization with our Magnetic Modular Organizer Trays. These adaptable trays offer the ideal solution for arranging and accessing your tools, parts, and small items conveniently.&nbsp;Each tray is equipped with a robust magnetic base, allowing it to securely attach to any ferrous metal surface, such as toolboxes, workbenches, or metal shelves. Thanks to their interlocking design, these trays can be easily joined together to create a customized organizational system tailored to your specific requirements.&nbsp;These trays are perfectly sized to accommodate various items without occupying too much space. Whether you're a professional mechanic, a DIY enthusiast, or simply someone who appreciates a well-organized workspace, these trays will simplify your life.&nbsp;&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/2jGsrYFvebI"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=2jGsrYFvebI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/2jGsrYFvebI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/skOwrY_PTQI"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=skOwrY_PTQI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/skOwrY_PTQI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>