dinoracer

999henry

This pipette stand is designed for Eppendorf pipettes but it fits other brands.&nbsp;The 160mm one can fit two. &nbsp;Print with raft/brim to prevent warpage.

Pipette Stand Pipette Holder

Microscopy

DV.O Daniel Onescu

replica of a model seen on the Internet. This version also has graduations from 5 to 5 millimeters&nbsp;&nbsp;

Drawing Line Ruler ver. 2.0

Woodworking

Barry

Ich habe mir dir mühe gemacht und für die Ikea Alex Schubladen Trenner designet. 50mm für die kleinen Schubladen. 100mm für die großen Schubladen. Das system besteht aus den Verbindern (Schwarz im bild) Und den Plates (Weiß im bild)  Ihr könnt natürlich auch die steckverbinder verkehrt herum in die schublade Stellen und die wände reinsliden so habt ihr den vorteil das ihr es bei bedarf mit doppel seitigem klebeband fixieren Könnt. Druckeinstellungen: Die Verbinder habe ich mit einer Wandstärke von 2 Gedruckt und 15% Gitternetzt infill aber dies ist euch überlassen Wichtig ist nur das die verbinder mit der Flachen seite auf dem Druckbett zu stellen somit werden keine stützen benötigt und der drucker muss kein Überhang drucken. Die Plates habe ich mit einer Wandstärke von 3 Gedruckt mit 5% Gitternetz infill oder kein infill. Doch auch dies ist euch überlassen ob er sie stabiler braucht wenn ihr mal was in die Schublade wirft oder ob ihr die sachen ordentlich reinlegt. Die Plates werden stehen gedruckt somit können viele auf eine Druckplatte gestellt werden ein Brim ist Normal nicht von Nöten kann aber Helfen. Diese werden ohne kleber einfach zusammen gesteckt wie man sie benötigt. eurer kreativität ist keine grenze gesetzt. Falls man sie für andere schubladen nutzen möchte kann man sie im slicer ganz einfach Je nach schubladen Größe skalieren. Am besten NUR in der Z höhe skalieren Und falls die Größe nicht dabei ist die ihr benötigt könnt ihr diese entweder aus den bestehen skallieren oder selbst deignen die maße dafür könnt ihr aus der Skizze entnehmen. Die 4.9mm sind wichtig die 150mm stehen dort nur als Orientierung.&nbsp;<img class="image_resized" style="width: 29.57%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000496828/design/2024-06-15_0aabd9a18504c8.png">Ich hoffe sehr das euch mein Kleines Projekt Gefällt und freue mich schon jetzt auf euere Makes.  Liebend gerne auch anregungen und ideen Mitteile darüber freue ich mich ebenfalls. Bis dahin Happy Printing

The Drawer Dividers

Organisers

Charizard

George GxG

Finding a filament clip should be easy for such a small piece of plastic. But after almost 2 years of 3D printing I didn't find the best one so I made The Perfect one :). My requests was:<ul><li>no side mount of the spool - will eventually break the zip begs </li><li>no filament bend - hate this</li><li>easy to print with less material</li><li>sort of snap fit for the filament</li></ul>I was inspired by <a href="https://www.thingiverse.com/thing:4060728" rel="nofollow">this</a> but I start from scratch adding some edges to the original idea for the filament to snap fit. This is my “Hello World” project in Fusion360. Print info: 0.2mm layer or lower, 3 perimeters. Print one for test: if is too tie or too loose play with the flow. Different filaments have different tolerances. I printed in PLA CF and tested with spools of PLA, PETG, FLEX, but I highly recommend to print in a tough material like PLA+, PETG or even better to reduce wear and tear.

The Perfect Filament Clip

Collected

Another Try making a [Makercoin](<a target="_blank" href="https://www.youtube.com/watch?v=tGtNLpYSXOU" rel="nofollow noopener">(25) Fusion 360 for Beginners - Design and 3D Print a Maker Coin! CAD For Newbies - YouTube</a>)

Makercoin v2

Makercoins

Wing-Art

Look who&#39;s back! KNIFE CAT! The &#39;Knife Cat&#39; Napkin Holder is an indispensable accessory for all cat lovers. It features a unique silhouette of a cat holding a knife in its mouth, bringing a playful and humorous vibe to any kitchen or dining room. Its elegant black design highlights the feline contour, sure to capture the amused looks of your guests. The &#39;Knife Cat&#39; is the new napkin superhero in your household!Additionally, we offer two stylish versions: the &#39;FLAT&#39; version, which displays the cat as a flat silhouette, and the &#39;3D&#39; version, where the white silhouette of the cat stands out in relief. Choose your opponent – or get both for double the fun!  …and isn&#39;t this just the perfect Christmas gift for cat lovers? <a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Compatible with HEXAGON NAPKIN HOLDER</a> Just take a look at my other Cats here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/234431#profileId-250975" rel="nofollow noopener">Paw Gift Box</a></li><li><a target="_blank" href="https://makerworld.com/en/models/211023#profileId-230853" rel="nofollow noopener">KITTEN LOVE</a></li><li><a target="_blank" href="https://makerworld.com/en/models/191314#profileId-211212" rel="nofollow noopener">CUP CUDDLER - Cat Coaster</a></li><li><a target="_blank" href="https://makerworld.com/de/models/29899#profileId-26258" rel="nofollow noopener">KNIFE CAT plate</a></li><li><a target="_blank" href="https://makerworld.com/en/models/160631#profileId-176318" rel="nofollow noopener">KNIFE CAT Lightbox (bloody &amp; honest Version)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180745#profileId-198884" rel="nofollow noopener">KNIFE CAT Coaster</a></li><li><a target="_blank" href="https://makerworld.com/en/models/145924#profileId-158838" rel="nofollow noopener">MONITOR CAT</a>  </li></ul>Just take a look at my other Household Tools here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/406101" rel="nofollow noopener">Kitchen Dispenser for Jars - Version 2 with Quicklock Mount</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkiin Holder</a></li></ul>&nbsp;&nbsp;&nbsp;

KNIFE CAT Napkin Holder

cats

ShearLab

This Harry Potter's wand is printed in one piece and is about 20cm long. It's printed at an angle to provide the best structural strength and to avoid any plate textures transferring onto it.&nbsp;As per Bambu Lab recommendations, it is highly recommended to dry your filaments before printing to avoid issues (especially at the tip/ end of the print).&nbsp;Drying Requirements Wiki Page: <a target="_blank" href="https://wiki.bambulab.com/en/general/filament-guide-material-table#storage-and-material-specifications" rel="nofollow noopener">https://wiki.bambulab.com/en/general/filament-guide-material-table#storage-and-material-specifications</a>&nbsp;&nbsp;&nbsp;&nbsp;

Harry Potter's Wand

harry potter

Sylosis3d

Articulated 2D Unicorn&nbsp;<ul><li>Print in place</li><li>0.2</li></ul>

Articulated Unicorn

Unicorns

reefsurfer

This a model I designed as a gift and also as a way to test out the AMS.&nbsp;Video on how I designed the coaster<figure class="media"><div data-oembed-url="https://youtu.be/CiKTtSWDXGI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/CiKTtSWDXGI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Cat Coaster

cat things

wazza10

Contains 3 types divided by printing method, more info below.&nbsp;Included: model with a ball inside that only lightly touches the perimeter ball model with a ball inside that floats - space for supports model of the outer and inner ball split in halfdepending on what your printer can do best

Cat toy - ball in a ball

cat toys

LongBeachRaider

3D Puzzle cube. Easy print super fun, tough to solve the first few times! Great desk toy.

3D Puzzle Fidget Cube. 

toys games, and, puzzles

Kopp3D

An inkwell with a stopper and feather quill that can sit inside of it. Quill is printed in two pieces that need to be glued together to get the texture right on both sides. Since it's 3D printed I would not recommend actually putting ink in there unless you waterproof it, but the quill is functional if you have some printer ink handy!

Raven Feather Quill and Inkwell

!!!!! !!!!!!! !!!!! !!! !!!!!!!

kriswillcode

This model of a Poké Ball is easy to print, feels solid, and makes a great cosplay prop. It's easy to assemble and is fun to toss around.When printing, I used a 0.16mm layer height, 15% infill (gyroid), and 2 walls. Supports are not required, but they may help make the front “hole” cleaner.<ul><li>Print the body and button frame in black. </li><li>Print two caps: one in red and one cap in white.</li><li>Print the button in silver.</li><li>Print three pegs in any color.</li></ul>To assemble, use the second photo as a guide. Use glue to hold the ball together. Remember that the pegs are only used for alignment: they're not structural.

Pokemon Poke Ball

Pokeball

YGPark

Contains all optional files. Choose a form that suits your condition and print it out!!&nbsp;&nbsp;>Function1. Additional exhaust fan If you turn on the left switch, the LED lights up continuously The exhaust fan can be switched on, off and speed controlled using the exhaust motor controller next to it. However, since it is a low-cost motor, it only works when a certain voltage is applied.. It needs to be about 85% of the controller to start spinning. Subsequently, fine movement will adjust the speed. I bought another speed control fan because of the speed control part, but it was in the same condition, so I just finished with this product. (It took about another week because of this.) TT As another solution, mark2 is planning to add a temperature change sensor to allow the exhaust fan to operate and stop automatically without adjusting the speed.2. 2. LED Low-heat LEDs were applied to prevent them from breaking down under the influence of internal temperature, and for even light distribution, they were applied at a 20 degree angle. 0.76w x 6 pieces = 4.56w per piece.3. a thermometer The temperature of the upper part of the chamber can be checked by applying a needle-type thermometer. (You can take it out while cooking.)4. You can adjust the right lever to adjust the amount of heat exiting the rear top exhaust. Due to the strong performance of the additional fan, the hole was not made large to maintain the temperature inside the chamber.5. window partition vent It's a size that fits my fancy. I attached the f3d file, so you can pull it out according to the height of your window frame Even if you increase the chamber fan speed to 100%, the air suction snout is at the height of the extruder, so you can't suck the hot heat above that. In particular, the PLA is vulnerable to heat, which requires opening and printing the front door, so adding an outlet at the top allowed the door to be closed and output.It was built within 60mm to make the most of the space behind the printer.The temperature at the top of the chamber was maintained at 46-48 degrees. We are planning to match this part by applying the temperature sensor at mark2.The outlet plug is foreign, so it's thin, so it doesn't get tight. It's a good idea to exchange products that you throw away at home or on the radio. Or wrap it with tape so that the plug doesn't come offAll options are modular, so you can select and install only what you want. If you don't need an LED, you can take out the frame and print it out If you don't need a thermometer, don't plug it in~ To install the additional fan on the window side rather than behind the printer, pull out the 100mm external diameter and 100mm internal diameter adapter, respectively, and move them again. Since the fan controller (FWM) is not functioning properly, you can only turn it on and off without a controller.The AMS is designed so that it does not affect the bending of the rear tube even when setting is placed on the printer. >Main points when assembling It is recommended that you lay it on the floor first and then put it on the chamber. 1. Plug the power on/off switch into the fan's wire first to hold the line length. Connect the wiring as shown in the picture. Fan = Plug-Switch-Controller-Pan LED = Controller-Inverter-LED Pass the wires from the switch and the wires from the inverter in one place. Hand over the wires to the fan to the other two slots. The wires are relaxed, so don't make them too tight. If you fold the spare parts into the frame later, they will be neat. 2. Pull and pull the controller adjustment knob, assemble it to the case, and plug the knob back in. 3. Never cut the wire and adjust the length with LED wires as it has holes to match the length of the inverter's wiring~ 4. Use the 'Tree' support when extracting the vent3 file and carefully remove the parts when removing the support. 5. Insert the magnet by setting 'Pause' by pressing the right mouse button at the first layer where the hole is covered in the preview slicing state. 6. The Extruder Tube Guide must be installed. https://www.printables.com/model/338542-x1-p1p-ptfe-tube-guide-to-fix-loading-issues-best-&nbsp;> Purchase ListController https://ko.aliexpress.com/item/1005004180917280.html?spm=a2g0o.order_list.order_list_main.23.5faa140fPiDN3o&gatewayAdapt=glo2kora blast fan https://ko.aliexpress.com/item/1005004354219502.html?spm=a2g0o.order_list.order_list_main.58.5faa140fPiDN3o&gatewayAdapt=glo2korLED / Inverter Epoxy type 3-hole module KPL Korean 30w (165x24x18mm)neodymium magnet Magnet size: D15Xd7.3X15TThermometer Advanced Cooking Thermometer (Automatic Off after 10 minutes) https://ko.aliexpress.com/item/1005002322143988.html?gatewayAdapt=glo2kor - Hardware store bellows duct 100 mm Cable ties (or anything you can tie to your house or electrical tape)

Vent for P1S by YGP

might like

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>