digitalfoufou

JTK_29

!!! Be careful not to turn too tightly / risk of bragging !!!&nbsp;Infos:max. table thickness: 36,5mm&nbsp;Recommended:layer height = 0.28mmnozzle = 0.4mm Required filament:Headset-Controller_Holder-Wireless= 54,04gHeadset-Controller_Holder-Cable= 64,15gScrew= 8,09g

Universal Controller/Headphone holder

GAME

GalacticRingBearer

Simple Lotr bookmark. Filament changes at height level. Ironed all top surfaces for cleaner look.

Lord of the Rings (lotr) Bookmark

Utiles

Mahave

Remix of the 40mm high storage box to drill bits. Have made it in different height, 40, 50, 60, 65, 70, 75 and 80mm high. 65mm fits perfect to 1.0 to 3.0mm set af drill bits Use a 18mm labelprinter or some cardboard/paper to insert some labels on the sides in the channels.

Small storage container for ex. drill bits - Multiple sizes 40-80mm high

Outils 

NoNameToo

I would like to share the most ideal and easy to print jewelry box with you all. This modular design ensures that everybody can create the perfect and beautiful stacked jewelry box. Choose any color combination you like, or even print it from top to bottom in color changing PLA to create a beautiful rainbow effect. You can now organise your rings, bracelets, earrings, necklaces, watches or (Apple) watchbands with this stylish jewelry organiser. This could also be a perfect (Valentines) gift for someone you close to you!&nbsp;This prints in no-time without any supports needed. I've had great luck with Bambu PLA matte for the boxes and Bambu Silk PLA for the lid. Just choose the type of box you want to print and you can start printing!&nbsp;Names of print profiles with corrisponding models<img src="https://makerworld.bblmw.com/makerworld/draft/341890/2024-01-02_eadc06dab0b618.jpg">&nbsp;If you have any feedback or request an addition to the models, please let me know! &nbsp;I would also love to see your color combinations in the comments.&nbsp;Happy printing!&nbsp;

Jewelry box | Fully customizable and modular |Ideal gift!

Snigzou

A crayon pot with a broken like texture. Can also hold anything else, but voids warranty if you do so.

Broken crayon pot

VASES

Pengolin Design

A practical holder for sunglasses to suit the season, which anyone can easily attach to their ventilation system. There are 2 versions, a small one and a broather one. Both were tested in 4 different cars from different manufacturers.&nbsp;For me, the small one was more than enough to hold my sunglasses securely without any noise while driving.If your glasses have a wider frame either use the small clip to hold them in the center of the frame or try out the bigger version to let them slide in all the way.&nbsp;Prints without support!&nbsp;If you have any suggestions on how to improve this simple design, or need a remodel to fit your car please contact me :)&nbsp;Hole size:Clip v1: 12.5mm x 6mmClip v2: 16.5mm x 6mm&nbsp;

Sunglass Clip for your cars air vent

Lunettes

Marc Elbichon

➡️ Checkout the entire <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/477489" rel="nofollow noopener">Ikea Skadis Collection</a> !&nbsp;Hi there! Here is some hooks for Ikea Skadis Panels!&nbsp;Enjoy!

Ikea Skadis Hooks

SKADIS

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

BUREAU

Duane777

This a redesign of a popular model I made a few years ago, most phones have increased in size. Also the tolerances afforded by Bambu Lab machines make it much easier to print and assemble. It suits phones up to 12mm thick. 4 screws M3 x 8 or 10mm long will do.The back cover has 3 indents to lock the vent clips, you can use 2 on the sides or one in the centre, there's also a longer reach vent clip.&nbsp;UPDATE: Added the vertical gripper which I seemed have forgotten. Thank you <a target="_blank" href="https://makerworld.com/en/u/335578002" rel="nofollow noopener">user_335578002</a>