Diff

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Plants

3dEd

Every electronic workbench benefits from a well-organized supply of electronic components. This is a system to provide organized storage. There are two case sizes, a 2-drawer and a 4-drawer case. There are six different drawer configurations with 24, 16, 12, 8, 4, or no divisions, allowing for a wide variety of component sizes and quantities. Drawer16 was specifically designed for resistors which provides the formfactor that the rest of the drawers follow.&nbsp;Each case is robust and has feet that fit neatly into the indentation on the top, allowing for stable stacking. The drawers have slots for identifying component values. The slots are sized to use a 1” x 7/8” (25mm x 22mm) piece cut from card stock. &nbsp;The only printing issue to consider is that when printing PLA, the auxiliary fan on the P1S and X1-C should be set to 30% max, either through the filament settings or manually at the control panel. Otherwise, because of the wide footprint, one is likely to get lifting on the side of the print closest to the fan.

Electronic Component Storage and Organizing System

Electronic

PedroKV

Two different moders here:<ol><li>sealant cartridges wall holder. Use PETG. If you need more in a row, use a joint. You need screws of 4mm diameter.</li><li>sealant cartridges shelf stacker, for infrequently used cartridges.</li></ol>Print with PETG.

Sealant cartridges wall holder and shelf stacker

Tools

DocLex

Deutsche Version weiter unten…&nbsp;Are you looking for an original gift? I have something for you... This labyrinth box serves as a closure for a wine bottle. The bottle can only be opened once the puzzle has been solved. Not just the right thing for a puzzle lover...Instructions: Measure the smallest diameter at the neck of the bottle and print the corresponding printing plate. The order of assembly can be found in the animation in the picture gallery. Done!Have fun printing and giving.&nbsp;Sind sie auf der Suche nach einem originellen Geschenk? Ich habe da etwas für sie... Diese Labyrinth Box dienst als Verschluss für eine Weinflasche. Erst, wenn das Rätsel gelöst ist, lässt sich die Flasche öffnen. Nicht nur für einen Rätselfreund genau das richtige...Anleitung: Messen sie den kleinsten Durchmesser am Hals der Flasche und drucken sie die entsprechende Druckplatte. Die Reihenfolge der Montage entnehmen sie der Animation in der Bildergalerie. Fertig!Viel Spass beim Drucken und schenken.&nbsp;&nbsp;Can&#39;t find the solution? Do you need help? Have a look here... Findest du die Lösung nicht? Brauchst du Hilfe? Schau mal hier... <a target="_blank" href="https://makerworld.com/en/models/426662#profileId-330532" rel="nofollow noopener">https://makerworld.com/en/models/426662#profileId-330532</a>

Wine bottle labyrinth puzzle box / Wein Labyrinth

Gifts

KYZ Design

Gridfinity baseplates completely remodelled from scratch, designed to minimise print time.<ul><li>Lower overall height (top trimmed)</li><li>Flares on the bottom removed</li><li>Smaller radii</li></ul>Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Print <a target="_blank" href="https://makerworld.com/en/models/76537" rel="nofollow noopener">these bins</a> next! <img src="https://makerworld.bblmw.com/makerworld/draft/285381/2023-11-28_4d90d07fb6c75.png">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.

Gridfinity Superlight Baseplates

Gridfinity

charlie.waterworth

CHECKOUT THE UPDATED VERSION HERE: <a target="_blank" href="https://makerworld.com/en/models/461128" rel="nofollow noopener">https://makerworld.com/en/models/461128</a> &nbsp;This little Dyson attachment can be inserted in to the seal of a filament vacuum dry bag and suction all the air out in a second or two!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000165870/design/2024-02-01_f681c4c87e38a.gif"></figure>&nbsp;This is a way better option than the little hand pump that comes with the popular AliExpress/Temu/Amazon filament vacuum bags.&nbsp;Designed for my V8 and believe it fits all V models from V7 onwards? (V6 and older had a different connector design). Let me know in the comments which models it fits.

Filament Vacuum Bag Dyson Adaptor

Printer

Martin Kozak

<h3>Model</h3><ul><li>Model is 35 cm long, consists of 119 pieces and needs 1400 g of PLA filament (and some TPU for tyres). Total print time is about 2 days.</li><li>Tyres need to be printed from TPU. I'm using Colorfabb Varioshore TPU</li><li>Biggest part is 310 mm long and it DOES NOT fit A1 mini build plate.</li><li>Worm gear must be printed with 0.1 mm layer height.</li></ul><h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/525554/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li><li><a target="_blank" href="https://makerworld.com/en/models/146718#profileId-159991" rel="nofollow noopener">https://makerworld.com/en/models/146718#profileId-159991</a></li><li><a target="_blank" href="https://makerworld.com/en/models/162579#profileId-178451" rel="nofollow noopener">https://makerworld.com/en/models/162579#profileId-178451</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175873#profileId-193384" rel="nofollow noopener">https://makerworld.com/en/models/175873#profileId-193384</a></li></ul>&nbsp;

Plants

Electronic

Tools

Gifts

Gridfinity

Printer

Lego