didjeriduo

PenolopyBulnick

Thought I'd make a new door corner decor pieces with Home Sweet Cabin instead of Home Sweet Home. I also changed up the font so that I wouldn't have to worry about the dot on the “i” and made it small caps. &nbsp;Color change between layers.

Home Sweet Cabin Door Corner Decor

Cabin

3D design shop

After a long journey, I've finally completed my flexible skeleton dragon.&nbsp;It's a fun piece of toy that's incredibly flexible, with virtually all joints capable of movement. It has become a huge hit with the kids at home!&nbsp;I printed it on a smooth surface, which eliminates potential issues with adhesion on a textured bed. If adhesion problems persist, I recommend adding a brim.&nbsp;Improved version

Articulated Skeleton Dragon

tonprint

WarriorSoto

Después de tanto Papa Noel y merry christmas me he visto obligado a diseñar algo de los Reyes Magos.&nbsp;Impresión super sencilla, 0 complicaciones.&nbsp;Que lo disfruten en familia.&nbsp;¡Feliz Navidad!

Reyes Magos para la puerta

Christmas 

cyanidesugar

Sleep, if you dare! &nbsp;This is a combined print that utilises filament painting as well as classic 3D printing methods. The included 3MF has all the settings already applied if you are using the profile attached, but if you are downloading the raw files, please follow the instructions below.&nbsp;Print Instructions<ol><li>The print swaps filaments 4 times, with the final time being the colour of the mask that ‘pops out’ from the print. In my print, I used a 5th colour (marble), but you can use what ever colour you want, or even reuse the white. </li><li>I printed with supports for the mask, but depending on your printer, you may get away with not having supports. I also altered the mask to be printed with 5% infill. </li><li>The mask will have a small gap at the top to remove the supports. Print layer swaps below: </li></ol>Filament Swaps&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm. Note: The mask portion (layer height 2.04mm and above) can be printed with 5% infill.&nbsp;Filaments Used:<ul><li>PLA Kingroon Black Transmission Distance: 0.4 </li><li>PLA+ eSun Grey Transmission Distance: 1.4 </li><li>PLA META Sunlu Red Transmission Distance: 4</li><li>PLA Kingroon White Transmission Distance: 8</li><li>PLA CC3D Marble Distance: 5.4 (this is the mask!)</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #12 (1.08mm) swap to Grey</li><li>At layer #15 (1.32mm) swap to Red</li><li>At layer #19 (1.64mm) swap to White for the rest.</li><li>At layer #25 (2.04mm) swap to Marble (this is the mask!)</li></ul>&nbsp;&nbsp;