dgrayer87

senura.senaratne

this one has a solid base need organic supports 0.2mm layer height i used 0.6 mm nozzle but the original was made using 0,415% infill

octopus Benchy stand

Benchy

layrgoods

Show your love with this cute Valentine's Day Bear!

Cute Valentine's Day Bear

valentines

Fat Tony

As an American, I will use ANYTHING but the metric system to take an accurate measurement. While the metric system may not be totally universal, everyone understands bananas! Available in units that were first to the moon and everyone else's. Not responsible for any sudden feelings of inadequacy. Scale is 1:1

Banana For Scale

Random

planpa3d

Created this design after seeing 3DTwinkie's Paper Bob-omb. Absolutely wonderful idea and turned out great!!This is more of a re-design than a remix, but I wanted to credit 3DTwinkie, as I love his ideas.I wanted to create something similar where the bomb was a container of sorts and could easily be printed without supports. With the right filament and printer set-up the seam or split in the bomb is barely visible, and looks like he is smiling. The head can be positioned in three different orientations when attached to the bottom.The rotation to unlock the container is opposite or “left-handed” threaded to confuse any unwanted persons from opening the container, but you can always mirror the bottom body and feet to correct this.I included two different versions of the bottom bomb and feet. A running or standing version. Just make sure to print out the correct feet to align with the bottom bomb.This version is a tad larger than the original design, I had to scale things up to get the twist locking design printing correctly with a 0.4 nozzle. So, I wouldn’t recommend scaling this design down, although it prints out great when scaling up.Everything should load in slicer program in the recommended orientation to be printed without supports.Thanks for checking out my design and happy printing!!You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a> to find out what I designs I am currently working onIf your interested in selling prints of my designs, become a Patreon supporter here… <a href="https://patreon.com/planpa3d" rel="nofollow">https://patreon.com/planpa3d</a>

Paper Bob-omb container

Nintendo

Matthew Ghost

NEW IMPROVED VERSION <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener">TILT PHONE STAND V3.0</a>&nbsp;The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.<ul><li>Designed for printing completely without supported!</li><li>You will need glue (Superglue for plastics). It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.</li><li>Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.</li><li>Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2023-12-16_fe804a401913c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2024-01-10_dac2c51f4fc07.jpg">

TILT PHONE STAND

Functional

Brandon Raineri

<h2>Updates</h2><h3>Version 2.1 (09/27/23)</h3><ul><li>Added lead-ins to the filament entry cavity</li><li>Changed PTFE stop ledge angle at filament exit end</li><li>Added note about countersinking PTFE that enters the printer</li><li>Updated printing profiles</li><li>Added additional sources for the release rings so they can be purchased outside of the US</li></ul><h3>Version 2</h3><ul><li>Added through hole for an M3x20mm mounting screw. Printed with a 0.4mm nozzle at 0.10mm layer height</li><li>Added printable locking clip STL file to eliminate backlash in fitting/PTFE tube when pulled on</li><li>Print with single inlet side on the build plate. Add a 10mm brim to stabilize the print</li></ul><h3>Version 1</h3><h2>Background</h2>This allows you to run material from the AMS or external spool without having to disconnect the PTFE tubing.This uses push to connect fittings as you would see in a typical PTFE connector.&nbsp;<h3>Release Rings: QTY: 3 of PC4-UM2</h3>I do NOT recommend the printed release rings as they are too fragile and do not securely hold the PTFE tube into place.&nbsp;Amazon (<a target="_blank" href="https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1</a> )AliExpress (<a target="_blank" href="https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt" rel="nofollow noopener">https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt</a>)McMaster (<a target="_blank" href="https://www.mcmaster.com/5472K101/" rel="nofollow noopener">https://www.mcmaster.com/5472K101/</a>)<h2>Installation</h2>Push the retaining ring into each end. After you insert the PTFE tubing until it bottoms out, pull back so the release ring has a gap between it and the printed surface. Insert the locking clip into this gap and then push the PTFE back in so it seats. This removes any backlash so the end of the PTFE tube remains firmly in contact with the bottom of the bore.&nbsp;While not always required, I found it helps to countersink the PTFE tube entering the printer as it provides a lead-in to prevent snags.&nbsp;You also need to ensure the printer buffer operates as intended. The PTFE tube exiting the buffer needs to clear the AMS clip going into the back of the printer. This prevents any unwanted resistance to the buffer and let‘s it operate as intended. If not, you can see what looks to be like a partial clog or even failure to retract filament.

Over-Engineered Y-Splitter

Bambu

Chris Pirillo

Using the remarkable capabilities of MidJourney AI, I successfully generated a stunning and meticulously detailed design for a Darth Vader helmet. Every intricate aspect of the iconic headgear was carefully crafted and brought to life, blending the essence of the dark side with cutting-edge technology. Harnessing the power of HueForge, I then transformed the virtual masterpiece into a tangible reality by seamlessly converting it into an STL file, ensuring every curve and feature remained faithfully intact. This innovative fusion of AI-driven creativity and advanced fabrication techniques has truly revolutionized the art of helmet design, resulting in a captivating and awe-inspiring representation of the Sith Lord's formidable presence.&nbsp;Can you tell I wrote that using ChatGPT?&nbsp;I sliced this at a .08mm layer height.<ul><li>Black to layer 5</li><li>Dark grey to layer 10</li><li>Light grey to layer 37</li><li>White to layer 39</li></ul>&nbsp;

Star Wars (Inspired) "Flat Darther" HueForge Darth Vader Helmet

Hueforge

ferridaniele82

This model is an adaptation for the bambulab printer of the model in this link:<a target="_blank" href="https://www.printables.com/it/model/623069-miss-minutes-ghost-clock-loki/files" rel="nofollow noopener">Miss Minutes Ghost Clock (Loki) da PhilippHee | Scarica il modello STL gratuito | Printables.com</a>by <a target="_blank" href="https://www.printables.com/it/@PhilippHee" rel="nofollow noopener">PhilippHee | Printables.com</a>