desertfox

xallex digital design

Replaceable HEPA/Carbon Charcoal Filters for Bambu X1C/P1S Chamber Exhaust Stackable Chamber Exhaust port filter housing for either HEPA or Carbon Charcoal filters. &gt; Housing mounted to printer using existing threaded holes on the printer, using x4 M3x6mm button cap screws. &gt; Mesh Layer and Top mounted to Housing using x4 M3x6mm button cap screws. &gt; Filter Cartridge slides in from the side. &gt; Optional Housing with modification for use on printers that have the AMS Hub installed are included&gt; Optional TPU gaskets are included &gt; Optional Additional Filter Housing can be added to use multiple filters, this is fitted between the Housing and the Mesh Layer using x4 M3x25mm button cap screws. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. Use recommendations: - Use top glass riser to increase airflow - Set the chamber fan to 70% or higher. HEPA Filters: (<a target="_blank" href="https://amzn.to/49Uu6vF" rel="nofollow noopener">https://amzn.to/49Uu6vF</a>) Cut-to-Fit Carbon Pad for Air Filters Charcoal Sheet (<a target="_blank" href="https://amzn.to/4bd4iw1" rel="nofollow noopener">https://amzn.to/4bd4iw1</a><a target="_blank" href="https://amzn.to/49OXIe5" rel="nofollow noopener">)</a> Screws: x4 Qty M3x6mm Button Cap screws to mount Housing to printer (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) x4 Qty M3x6mm Button Cap screws to secure Top and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) If optional second filter housing is used: x4 Qty M3x25mm Button Cap screws to secure optional second filter housing, Top, and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) Material: Silver - IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4dhLtK4" rel="nofollow noopener">https://amzn.to/4dhLtK4</a>) Light Blue -IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4deSoUc" rel="nofollow noopener">https://amzn.to/4deSoUc</a>) Red - Hatchbox (<a target="_blank" href="https://amzn.to/3Ukwbvc" rel="nofollow noopener">https://amzn.to/3Ukwbvc</a>) - Design Update - 4.12.24 - - Included an optional filter tray addition to use both filters simultaneously. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. - Increased the diameter of the holes in the Top, and Mesh parts to allow the M3 screws through. - Added optional TPU gasket files. Thanks <a target="_blank" href="https://makerworld.com/en/@wiczdesigns" rel="nofollow noopener">@wiczdesigns</a> for the suggestions. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-12_b002cd1bffc35.jpg">   - Design Update - 4.11.24 - I have added main housing to accommodate printers that have the AMS Hub installed. Thanks to user @redborder for the suggestion and reference photos. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-11_f7d508262327d.png"> - Design Update - 4.9.24 - I have added a filter box and lid for use with Carbon/Charcoal Filter Material, to extend the carbon filtering from the chamber exhaust.

HEPA/Carbon Filters Bambu X1C/P1S Chamber Exhaust

P1S Upgrades

EEEEEE

A smaller version of Simple Indoor Glider v2 with increased stability, easier elevator folding, and more control of the flight.&nbsp;Profile is for PLA on the p1/x1 series. 17 minute print with under 5 grams of filament. Do not bend or warp wings while removing from the build plate.&nbsp;Thrown from below the head of the glider like a dart. More control means more room for error, but also adds the ability to add a predetermined curve to the flight. It should fly straight if thrown straight like a dart, but curve in the direction it was curve thrown in. It should also maintain its tilt for some time before leveling out. Combining curve throws and tilts will make an interesting pattern. As for throw strength, it can be medium to hard as long as it is thrown straight.&nbsp;Instructions: Fold the elevators 35 to 45 degrees up from the downwards facing side of the head. Then fold the stabilizers 90 degrees up relative to the downward-facing head. The weight of the head must be facing downward relative to the elevators and stabilizers when thrown.&nbsp;&nbsp;&nbsp;

Nano Glider v3

random Stuff

tryfor34

My kids play with toy cars of varying sizes and my mother-in-law back in the day had a big set that her kids used to love. These roads are very easy to print, I&#39;ve made the connection points oversized for little people who may not have the best hand eye coordination. &nbsp;I designed these pieces to not need supports.

P1S Upgrades

random Stuff

Spielzeug